fantastic furniture Torkay Bedside 2 Drawer User manual

Version1.0
Bedside 2DrawerWhite Walnut
T rkay
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
WARNING:ENSURETHEWALLSTRAP ISATTACHED TO
AVOIDSERIOUSINJURY.
Toavoidanyseriousorfatal injury,thisproduct hasbeenprovided
witha wallstrap toprevent toppling.Westronglyrecommend that
thisproduct is permanentlyfixed tothe wallorother suitable
surface.Fixingdevicesarenotincluded sincedifferentsurface
materialsrequiredifferentattachments.Pleaseseek professional
advice ifyouareindoubt ofwhat fixing device to use.

Assembly checklist
Useful Infrmatin
Read throughtheinstructionscarefully
beforeyoubegin. Makesure youhavealltherequiredtools. Neveruse power tools unlessinstructed.
Identify andlayoutall of thecomponents
beforeyoubeginassembly. Unless instructed, donotfullytighten screws untilthe itemisfully assembled.
Never use power tools unless specifically instructed.They can damageyourcomponents
or hardware if usedincorrectly.
The most common mistakes madeduring assembly are using the wrong hardware or
getting components back to front.
Always useasoft surface(suchas carpet or cardboard) when assembling yourproduct
to avoidscratching or damaging the surfaceof the product.
Bulky itemssuchas wardrobes andbunk bedshouldbeassembled in the roomthey will
beusedin as they may not fit throughadoor onceassembled.
Never use any glue until you are certain that the parts belong together.
Periodically check andre-tighten all fasteners.Check the productcare label or website
for product care instructions.
Ifyou are having any difficulties assembling your product,missing any hardware or
components please visit our website HelpCentre for further assistance.
Page3
fantasticfurniture.com.au
!
!
!
!
!
!
!
Please see page2for any safety requirements orweight restrictions.
!

Whaty u Need
Toassembletheproduct
fantasticfurniture.com.au
Othertls yu need:
Phillips HeadScrewdriver
SoftHeadedMallet X2
Part list
1 xTopPanel (P1);
1 xLeftSide(P2);
1 xRight Side(P3);
1 xTopPanel Rail (P4);
1 xFront Support Rail (P5);
1 xBackSupport Rail (P6);
1 xBackPanel (P7);
2xDrawerFronts(P8);
2xLeftDrawerSides (P9);
2xRight DrawerSides (P10);
2xDrawerBacks(P11);
2xDrawerBases (P12).
8xSmall
CamNuts
(H18)
Page4
Hardware Pack
4xHandle
Screws
(H7)
Top Panel
(P1)
BackPanel
(P7)
LeftSide
(P2)
RightSide
(P3)
FrontSupportRail
(P5)
TopPanelRail (P4)
Drawer
Base (P12)
LeftDrawer
Side (P9) DrawerFront
(P8)
RightDrawer
Side (P10)
DrawerBack
(P11)
BackSupprotRail
(P6)
4xMedium
Screws
(H6)
2xHandles
(H8) 24 xSmall
Screws
(H9)
12xLarge
CamBolts
(H1)
12xLarge
CamNuts
(H2)
8xWooden
Dowels
(H3)
1 xLong
Screw
(H4)
4xBack
PanelSuports
(H5)
9xLarge
Screws
(H10)
2xLeft Runner
Tracks
(H11)
2xRightRunner
Tracks
(H12)
1 xWall Strap
(H15) 2xWashers
(H16) 8xSmall
CamBolts
(H17)
2xLeftRunners
(H13) 2xRightRunners
(H14)

Youwillneed:
Youwillneed:
4xWooden
Dowels(H3)
Attach6xlargecambolts(H1)totoppanel(P1),tightening using aphillips
headscrewdriver.
Insert 4xwoodendowels (H3) intothefrontsupportrail (P5) andback
supportrail(P6)using asoftheadedmallet.
Step2
Step1
Page5
fantasticfurniture.com.au
(H3)
(H3)
(H3)
Phillips Head
Screwdriver
SoftHeaded
Mallet
6 xLarge Cam
Bolts(H1)
(H3)
(P6)
(P5)
(P1)
(H1)x6

Youwillneed:
2x Wooden
Dowels
(H3)
Attach3xlargecambolts(H1)toleftside(P2),tightening usingaphillipsheadscrewdriver.
Insert 2xwoodendowels (H3) intotheleftside(P2) usingasoftheaded mallet.
Attach2xleftrunnertracks(H11) toleftside(P2) using6x small screws (H9),
tightening with aphillipshead screwdriver.Ensure youinsertthe small screws(H9)into the
holesonthe tracks(H11)as shown.
2xLeft
Runner
Tracks(H11)
6 xSmall
Screws
(H9)
Youwillneed:
2xRight
Runner
Tracks(H12)
2x Wooden
Dowels
(H3)
Attach3xlargecambolts(H1)torightside(P3),tighteningusingaphillipshead
screwdriver.
Insert 2xwoodendowels (H3) intotherightside(P3)usingasoftheadedmallet.
Attach2xrightrunnertracks(H12)to right side(P3)using 6x smallscrews (H9),
tightening with aphillipshead screwdriver.Ensure youinsertthe screws(H9)into the
holesonthe tracks(H12)as shown.
Phillips Head
Screwdriver
6 xSmall
Screws
(H9)
Step4
Step3
Page6
fantasticfurniture.com.au
(H11)
(H3)
(H3)
(P3)
(H3)
(H3)
Phillips Head
Screwdriver
SoftHeaded
Mallet
SoftHeaded
Mallet
3xLarge
CamBolts
(H1)
3xLarge
CamBolts
(H1)
(H1)x3
(H9)x6
(P2)
(H1)x3
(H9)x6
(H12)
(H12)
(H11)
(H9)
(H11)

Attachtop panelrail (P4) toleftside(P2) ensuringthe holeonthe rail(P4)is facing
downasshown.Insert largecamnut(H2)into rail(P4)androtate so thearrow points
towardstheincomingcambolt.Turnthe camnut(H2)clockwise to lock.
Attachfront supportrail(P5) to leftside(P2)ensuringtheholesarefacingdown as
shown.Insert1x largecamnut(H2)intosupportrail (P5) androtate the camnutso
the arrow pointstowardstheincoming cambolt.Turnclockwiseusingaphillips
head screwdrivertolock.
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Step6
Step5
Page7
1 xLarge
CamNut(H2)
Youwillneed:
fantasticfurniture.com.au
Youwillneed:
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
(P2)
(P4)
(P2)
(P5)
(H2)
(H2)
(H2)
(P5)
(P2)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
1 xLarge
CamNut(H2)
largehole
facebottom

Step8
Step7
Page8
fantasticfurniture.com.au
Youwillneed:
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
Attachright side(P3)totherails(P4,P5,P6)and insert1x largecamnut(H2) into
eachrail (P4,P5,P6)asshown.Rotate thecamnuts(H2)so thearrows point
towardstheincomingcambolt.Turnclockwise usingaphillipshead screwdriver
tolock.
3xLarge
CamNuts(H2)
Youwillneed:
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
(P2)
(P6)
(P2)
(P3)
(H2)
(H2)x3
Attachback supportrail (P6) toleftside(P2),ensuringtheholesarefacingdownas shown.
Insert 1xlargecamnut(H2) intosupport rail(P6)androtate so thecamnutso the arrow
points towardsthe incomingcambolt.Turn clockwiseusing aphillipsheadscrewdriverto
lock.
(P6)
(H2)
(P2)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
1 xLarge
CamNut(H2)

Attachtop panel(P1)to theassembledframeasshown.
Insert 6xlargecamnuts(H2)intothe leftsideandright
sidepanels(P2,P3).Rotatethecamnutssothe arrow
points towardsthe incomingcambolt.Turn clockwise
usingaphillipshead screwdrivertolock.
Attachtop panelrail (P4) totoppanel (P1) using1x long
screw(H4),tighteningwithaphillipsheadscrewdriver.
Slidethebackpanel(P7)intothegroovesontheleftandright side(P2,P3).
Step10
Step9
Page9
fantasticfurniture.com.au
6 xLarge Cam
Nuts(H2)
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt.
(P7)
Youwillneed:
1xLong
Screw(H4) Phillips Head
Screwdriver
(P1)
(H2)x6
(P4)
(P2)
paperlamination
faceinside

Insert 4xback panel support(H5)into eachcorner of theback panel (P7) andsecure
using 4xmediumscrews(H6),tightening withaphillipsheadscrewdriver.
Youwillneed:
X2
Step12
Step11
Attach4xsmallcambolts(H17) to1x drawerfront(P8)and tighten usinga
phillipshead screwdriver.
Repeat processfor theotherdrawerfront(P8).
Page 10
fantasticfurniture.com.au
4 xBackPanel
Suports(H5) 4 xMedium
Screws (H6)
Youwillneed:
8xSmall
CamBolts(H17)
(P7)
(P8)
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(H5)x4
(H6)x4
(H17)x4

X2
Slidedrawerbase(P12)intothegroovesonthedrawer sides (P9, P10) and
drawerfront(P8).
Repeat processfor theotherdrawer.
Attach1xleftdrawerside(P9) and1xrightdrawerside(P10)to1x drawer front
(P8),ensuringthe groovesonall thepanelsalign.Insert2x smallcamnuts (H18)
intodrawersides(P9.P10)rotatingthecamnutssothearrowpoints towards
the incomingcambolts.Turnclockwisetolockusing aphillipsheadscrewdriver.
Repeat processfor theotherdrawer
Page 11
fantasticfurniture.com.au
Youwillneed:
4 xSmall
CamNuts(H18)
Step13
Step14
This is h w acamnut w rks........
Theheadofthecam
boltgoesintotheopen
mouthofthecamnut.
Youthenturnthecam
nutso ittightensover
thebolt. (P8)
(P9)
(P10)
(P12)
(P9)
(P10)
X2
Phillips Head
Screwdriver (H18)x4

Attachdrawerback (P11)to drawersides(P9, P10) using4x largescrews
(H10),tightening using aphillipshead screwdriver.
Repeat processfor other drawer.
Attach1xhandle(H8)todrawerfrontusing2x handlescrews (H7).
Repeat processfor theotherdrawer.
Youwillneed:
4 x Handle
Screws(H7) 2xHandles
(H8)
X2
Step16
Step15
Page 12
You will need:
8xLarge
Screws(H10)
fantasticfurniture.com.au
(P11)
(P9)
(P10)
X2
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(H10)x4
(H7)x2

Attach1xleftrunner(H13)and1x right runner(H14)tothebottomof drawer sides (P9,
P10)using 3x smallscrews (H9).Ensureyou insert thescrewsintothe holes as shown.
Repeat processfor theotherdrawer.
Slidethe2 xassembleddrawers intothebedside table as shown.
Step18
Step17
X2
Page 13
12xSmall
Screws (H9) 2xLeft
Runners(H13)
2xRight
Runners(H14)
Youwillneed:
fantasticfurniture.com.au
(H13) (H14)
(H9)x6
(P9)
Phillips Head
Screwdriver
(P9)
(H13)
(H9)
(H9)
(H9)

1 xLarge
Screws (H10) 1 xWall Strap
(H15) 1 xWasher
(H16) Westronglyadvisethatyouuse
thewall safety strapprovidedto
preventtheunittoppling.
Attachwallstrap(H15) tobackofthetoppanel (P1) using1x largescrew (H10)
and1xwasher(H16).
Sep19
Page 14
Youwillneed:
fantasticfurniture.com.au
(H15)
(H16)
(H10)
Phillips Head
Screwdriver

1 xWasher
(H16)
Step20
Seekadvicefromaqualified
tradespersononhowto
attachsafetystrapto
thewall.
With assistance, move the
bedsideto itsfinal position.
Attachthewall straptothe
wall.Ensure itisfirmlyattached
andsecure.
Screwand Wall Plugarenot
provided.
Please use appropriatefixtures
foryourwall.
Page 15
fantasticfurniture.com.au
Youwillneed:
Phillips Head
Screwdriver

Page 16
fantasticfurniture.com.au
Step21