fantastic furniture Newhaven User manual

Newhaven
Version 1.0
Table D6
.fantasticfurniture.com.au

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it! Share it!
Fantastic buy! Share how it looks at home at Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
.fantasticfurniture.com.au Page 2

Assembly checklist
Read through the instructions carefully
before you begin
Make sure you have all the required tools.
Never use power tools unless instructed
Identify and layout all of the components
before you begin assembly.
Unless instructed, do not fully tighten screws,
until the item is fully assembled
Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
!
The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
!
Always use a soft surface ( such as carpet or cardboard ) when assembling your products to
avoid scratching or damaging the surface of the products.
Useful Information
Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
Never use any glue until you are certain that the parts belong together.
Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
!
!
!
!
If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!
Please see page 2 for any safety requirements or weight restrictions.
!
Page 3
.fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Page 4
.fantasticfurniture.com.au
Parts list
Table Top (P1)
2 x Table Leg Frames (P2)
2 x Stretchers (P3)
Hardware Pack
8 x Bolts
(H1)
8 x Spring Washers
(H2)
8 x Flat Washers
(H3)
1 x Allen Key
(H4)
4 x Screws
(H5)
4 x Felt Covers
(H6)

Step 1
Page 5
.fantasticfurniture.com.au
You will need
8 x Bolts
(H1)
8 x Spring Washers
(H2)
8 x Flat Washers
(H3)
Allen Key
(H4)
Attach table leg frames (P2) to table top (P1). Secure using 8 x bolts (H1), 8 x spring washers
(H2) and 8 x flat washers (H3) with allen key (H4).
Step 2
You will need
4 x Screws
(H5)
Phililps Head
Screwdriver
4 x Felt Covers
(H6)
Attach stretchers (P3) to table top (P1) and table leg frames (P2) as shown. Secure
using 4 x screws (H5). Tighten with phillips head screwdriver.
Stick 2 x felt covers (H6) on each foot of the table leg frame (P2). With assistance,
turn the table over.

Job complete!
In the interest of our environment please dispose
all packaging thoughtfully.
Page 6
.fantasticfurniture.com.au
Step 3