fantastic furniture Nicholls Bench Seat Black Ash User manual

Version 1.0
Nicholls
Bench Seat Black Ash
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Page 2
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Do not stand on, or use this bench as a step ladder.
Use this product for seating three persons at a time.
This product should be checked periodically to ensure
all components are secure and all hardware is tight.
Recommended weight capacity: 200kg
Caution:
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Part list
1 x Top Panel (P1)
2 x Leg Frames (P2)
2 x Top Rails (P3)
2 x Support Rails (P4)
Top Panel (P1)
Hardware pack
12 x Bolts 12mm
(H1)
4 x Bolts 35mm
(H2)
8 x Bolts 50mm
(H3)
8 x Flat Washers
(H4)
1 x Allen Key
(H5)
Leg Frame
(P2)
Leg Frame
(P2)
Top Rail (P3)
Top Rail (P3)
Support Rail
(P4)
Support Rail
(P4)

Step 1
Page 5fantasticfurniture.com.au
You will need
4 x Bolts
35mm (H2)
Required
Two People
Attach 2 x top rails (P3) to 2 x leg frames (P2) with 4 x bolts (H2) using allen key (H5) as shown.
1 x Allen Key
(H5)
(P2)
(P2)
(P3)
(P3)
H2
H2
H2
H2
(P3)
(P2)
H2

Step 2
Page 6fantasticfurniture.com.au
You will need
8 x Bolts
50mm (H3)
Position the assembled frame onto top panel (P1).
Attach the assembled frame to top panel (P1) with 8 x bolts (H3) and 8 x flat washers (H4)
with allen key (H5) as shown.
Align all bolts well before fully tightening.
1 x Allen Key
(H5)
(P3)
8 x Flat
Washers (H4)
(P1)
H3
H4
H5
(P3)
(P1)
(P3)
H3
H4

Step 3
Page 7fantasticfurniture.com.au
You will need
12 x Bolts
12mm (H1)
Required
Two People
Attach 2 x support rails (P4) onto leg frames (P2) and top panel (P1) with 6 x bolts (H1)
as shown, tighten with allen key (H5).
With help, turn over the bench.
1 x Allen Key
(H5)
(P1)
(P2)
(P4)
H1
H1
H1 (P4)
(P2)

Step 4
Page 8fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.