fantastic furniture Coda User manual

Version 1.0
Coda
Bookcase 4 Shelf
fantasticfurniture.com.au

Secure it!
Wall attachment guide
(with available wood stud)
Screw directly into
stud.
Please seek professional advice if you are in doubt of what fixing device to use.
•
•
• Do not
•
•
Reduce the risk of furniture
tip-over accidents
(with available wood stud)
S
.
Screw
fantasticfurniture.com.aufantasticfurniture.com.au
Recommended Weight Capacity :10kg/shelf

fantasticfurniture.com.au Page 3
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 4
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Hammer
DO NOT USE
Page 5
fantasticfurniture.com.au
Top Panel
(P1)
Side Panel
(P2)
Side Panel
(P2)
Bottom Panel
(P6)
Shelf Panel
(P3)
Divider
(P5)
Divider
(P4)
Parts list
Top Panel (P1);
2 x Side Panels (P2);
Shelf Panel (P3);
Divider (P4);
Divider (P5);
Bottom Panel (P6);
8 x Dowels
(H1)
8 x Small
Dowels
(H2)
2 x Long
Dowels
(H10)
12 x Cam Bolts
(H3)
12 x Cam Nuts
(H4)
1 x Allen Key
(H7)
6 x Inside
Hexagonal Bolts
(H6)
1 x Screw
(H12)
1 x Restraint
Strap
(H11)
2 x Brackets
(H13)
8 x Covers
(H8)
2 x Long Screws
(H5)
4 x Plastic
Glides
(H9)

You will need
Step 1
You will need
Step 2
6 x Cam Bolts
(H3)
Phillips Head
Screwdriver
You will need
Step 3
Page 6
fantasticfurniture.com.au
H3
H3
H3
H3
H3
H3
(P1)
Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown.
H3
H3
(P2) x 2
4 x Cam Bolts
(H3)
Phillips Head
Screwdriver
Attach 2 x Cam Bolts (H3) into each Side Panel (P2) as shown.
H3
H3
(P3)
Attach 2 x Cam Bolts (H3) into Shelf Panel (P3) as shown.
2 x Cam Bolts
(H3)
Phillips head
screwdriver

You will need
Step 4
Phillips Head
Screwdriver
You will need
Step 5
Page 7
fantasticfurniture.com.au
H10
H10
H5
H5
(P4)
(P3)
2 x Long
Dowels (H10)
2 x Long
Screws (H5)
Insert 2 x Long Dowels (H10) into the holes of Divider (P4) through Shelf Panel (P3)
as shown. Attach Divider (P4) to Shelf Panel (P3) with 2 x Long Screws (H5) using a
Phillips Head Screwdriver.
(P3)
(P5)
H4
H4
H8
H8
Insert 2 x Cam Nuts (H4) into the holes of Divider (P5).
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Push Divider (P5) into place and then tighten the Cam Nuts using a Phillips Head
Screwdriver. Seal the holes with 2 x Covers (H8).
2 x Cam Nuts
(H4)
2 x Covers
(H8)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Phillips Head
Screwdriver

You will need
Step 6
You will need
Step 7
Page 8
fantasticfurniture.com.au
(P5)
(P4) (P3)
(P2)
H4
H2
H4
2 x Cam Nuts
(H4)
2 x Small
Dowels (H2)
Insert 2 x Small Dowels (H2) into the holes of Shelf Panel (P3).
Insert 2 x Cam Nuts (H4) into the holes of Shelf Panel (P3).
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Push Side Panel (P2) into place and then tighten the Cam Nuts using a Phillips Head Screwdriver.
(P3)
(P2)
H4
H4
H2
H2
2 x Cam Nuts
(H4)
2 x Small
Dowels (H2)
Insert 2 x Small Dowels (H2) into the holes of Shelf Panel (P3).
Insert 2 x Cam Nuts (H4) into the holes of Shelf Panel (P3).
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Push Side Panel (P2) into place.
Tighten the Cam Nuts using a Phillips Head Screwdriver.
Phillips Head
Screwdriver
Phillips Head
Screwdriver

You will need
Step 9
You will need
Step 8
Page 9
fantasticfurniture.com.au
(P1)
(P2)
(P2)
(P4)
H4
H4
H4
H8
H1
H2
H1
H8
Insert 4 x Dowels (H1) into the holes of Side Panels (P2).
Insert 2 x Small Dowels (H2) into the holes of Divider (P4).
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2) and Divider (P4),
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Attach Top Panel (P1) into place and then tighten the Cam Nuts using a Phillips
Head Screwdriver. Seal the holes with 6 x Covers (H8) as shown.
6 x Cam Nuts
(H4)
4 x Dowels
(H1)
6 x Covers
(H8)
2 x Small
Dowels (H2)
(P6)
(P5)
(P2)
(P2)
H6
H6
H6
H6 H7
H1
H1
H2
H6
H6
Insert 4 x Dowels (H1) into the holes of Side Panels (P2).
Insert 2 x Small Dowels (H2) into the holes of Divider (P5).
Attach Bottom Panel (P6) to Side Panels (P2) and Divider (P5) with
6 x Inside Hexagonal Bolts (H6) using an Allen Key (H7).
1 x Allen Key
(H7)
6 x Inside
Hexagonal Bolts
(H6)
4 x Dowels
(H1)
2 x Small
Dowels (H2)
Phillips Head
Screwdriver

You will need
Step 10
You will need
Step 11
Page 10
fantasticfurniture.com.au
(P6)
H9
H9
H9
H9
H9
Place glides 10mm from edge.
Attach 4 x Plastic Glides (H9) to the bottom of Bottom Panel (P6) with a Hammer.
4 x Plastic
Glides (H9) Hammer
We strongly advise that you use
the wall safety strap provided to
prevent the unit toppling
H11
H13
H13
H13
Wall
Wall
Wall
Screw
H12
Carefully turn the bookcase over to an upright position.
Attach 1 x Bracket (H13) securely to back of Top Panel (P1)
with 1 x Screw (H12) through the smaller hole.
Align the opposite wall Bracket about 20mm lower than the one attached to the bookcase
so the Bracket can't be seen.
Using appropriate wall connection fixtures, secure the bracket to the wall
and thread the Restraint Strap through it.
Be careful not to over tighten the strap which would cause the unit to lean.
Phillips Head
Screwdriver
1 x Restraint
Strap (H11)
1 x Screw
(H12)
2 x Brackets
(H13)
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.