fantastic furniture HAYMAN Storage Mirror White User manual

Version 1.0
HAYMAN
Storage Mirror White
www.fantasticfurniture.com.au
REQUIRED
TWO PEOPLE

www.fantasticfurniture.com.au PAGE 2
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
Recommended weight capacity : 10KG.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied with a
wall strap to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Connecting
attachments for your wall are not included since different surface materials
require different attachments. Please seek professional advice if you are in
doubt of what wall connections to use.

Assembly checklist
Useful Information
www.fantasticfurniture.com.au PAGE 3
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.

Cabinet
(P1)
6 x Barrels
(H3)
2 x Ring Bolts
(H2)
6 x Bolts
(H1) 2 x Dowels (H4) 4 x Felt Pads
(H5)
2 x Plastic Washers
(H10) 4 x Hinge
(H11) 16 x Hinge Screw
(H12)
Parts list
Cabinet (P1);
2 x Frame (P2) ;
Support Rail(P3);
Support Rail (P4);
2 x Support Legs (P5);
Door (P6)
www.fantasticfurniture.com.au PAGE 4
What you need
to assemble the product
Additional Tools Required
Flat head screwdriver;
Phillips head screwdriver;
DO NOT USE
Hardware pack
Frame
(P2)
Support
Rail
(P3)
Support
Rail
(P4)
2 x Plastic Plugs
(H9)
Frame
(P2)
Support Leg
(P5)
Support Leg
(P5)
1 x Screw
(H7)
1 x Safety
Strap
(H6)
2 x Washers
(H8)
Door
(P6)

PAGE 5
You will need
Step 1
www.fantasticfurniture.com.au
(P3)
(P2)
(P4)
Phillips head
screwdriver
Step 2
H1
Insert 1 x Dowel (H4) & 1 x Barrel (H3) into Support
Rail (P3), ensure the Barrel (H3) is rotated horizontally with
the Flat Head Screwdriver ready for the incoming Bolt (H1) and attach 1 x Bolt (H1) by tightening with
the Phillips Head Screwdriver. Insert 2 x Barrels into Support Rail (P4), ensure the Barrels (H3) are
rotated horizontally with the Flat Head Screwdriver ready for the incoming Bolt (H1) and attach with 2
x Bolts (H1) by tightening with the Phillips Head Screwdriver.
Insert 1 x Dowel (H4) & 1 x Barrel (H3) into Support Rail (P3), ensure the
Barrel (H3) is rotated horizontally with the Flat Head Screwdriver ready for
the incoming Bolt (H1) and attach 1 x Bolt (H1) by tightening with the Phillips Head Screwdriver. Insert
2 x Barrels into Support Rail (P4), ensure the Barrels (H3) are rotated horizontally with the Flat Head
Screwdriver ready for the incoming Bolt (H1) and attach with 2 x Bolts (H1) by tightening
with the Phillips Head Screwdriver.
H1H1
H3
You will need
Phillips head
screwdriver
1 x Dowel
(H4)
H4
H1
H1
H1
(P3)
(P4)
(P2)
H4
Flat head
screwdriver
Flat head
screwdriver
(P2)
(P5)
H3 H3
3 x Barrels
(H3)
3 x Bolts
(H1)
1 x Dowel
(H4)
3 x Barrels
(H3)
3 x Bolts
(H1)
H3
H3H3
×
×

www.fantasticfurniture.com.au PAGE 6
Step 3
You will need
You will need
Step 4
Attach 4 x Hinges (H11) to Door panel (P6) and secure by tightening 8 x Hinge
Screws (H12) with the Phillips Head Screwdriver.
Apply 4 x Felt pads (H5) to bottom of Legs (P5) as shown.
(P5)
(P5)
H5
H5 H5
H5
4 x Felt Pads
(H5)
Phillips head
screwdriver
4 x Hinges
(H11) 8 x Hinge Screws (H12)
H12
H12
H12
H12
H12
H11
H11
H11
H11
(P6)
H11

Secure Door panel (P6) to Cabinet (P1) by attaching reverse of 4 x Hinges (H11)
with 8 x Hinge Screws (H12) by tightening with Phillips Head Screwdriver.
You will need
Step 6
Thread the Ring Bolts (H2x2) and Plastic Washers (H10x2) through each side of the Frame (P2) and
secure to the Cabinet (P1) by winding the Ring Bolts (H2x2) to tighten.
H2
H10
2 x Ring Bolts
(H2) 2 x Plastic
Washers (H10)
(P2)
(P2)
(P1)
www.fantasticfurniture.com.au PAGE 7
Step 5
You will need
Phillips head
screwdriver
8 x Hinge
Screws (H12)
H12
(P1)
(P6)
H12
H12
H12
H12 H11
H11
H11
H11
H11

www.fantasticfurniture.com.au PAGE 8
Step 7
You will need
Insert 2 x Plastic Plugs (H9x2) into each side
of the Frame (P2) and then gently rest the
Cabinet (P1) against the Plastic Plugs (H9x2).
To connect 1 x Safety Strap (H6) to the top
of the Cabinet (P1) use 1 x Washer (H8) and Screw (H7) by tightening with the Phillips Head Screwdriver.
We strongly suggest you use the wall strap provided to prevent the unit from toppling.
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
2 x Plastic Plugs
(H9)
Phillips head
screwdriver
1 x Safety
Strap (H6) 1 x Screw (H7)
1 x Washer
(H8)
Phillips head
screwdriver
1 x Washer
(H8)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
You will need
Step 8
Move the unit into it’s final position and then secure
the Safety Strap to the wall. Ensure it is firmly
attached. Screw and wall plug are not provided.
Please use appropriate fixtures for your wall.
* Seek advice from a qualified tradesperson on how to attach this safety strap to your specific wall.
H6
H7
H8
(P2)
(P1)
(P2)
H9
H9
H6
H7
H8
H8
Screw
Wall