fantastic furniture MONACO Series User manual

www.fantasticfurniture.com.au
Version 1.0
MONACO
Bedside2Drawer
TWOPEOPLE
REQUIRED

PAGE2www.fantasticfurniture.com.au
Enjoy
Yourpurchasefrom
Australia'sBestValueFurnitureStore

PAGE3www.fantasticfurniture.com.au
Useful Information
!Neveruse powertools unless specifically instructed. Theycan damage yourcomponentsor
hardware if used incorrectly.
!The most common mistakesmade during assembly are using the wrong hardware orgetting
componentsback to front.
!Always use a soft surface (such ascarpet orcardboard)when assembling yourproduct to
avoid scratching ordamaging the surface of the product.
!Bulky itemssuch aswardrobesand bunkbedsshould be assembled in the roomtheywill be
used in astheymaynot fit through a dooronce assembled.
!Neveruse anyglue until you are certain that the partsbelong together.
! Periodically check and re-tighten all fasteners. Check the product care labelorwebsite for
product care instructions.
!If you are having anydifficultiesassembling yourproduct, missing anyhardware or
componentsplease visit ourwebsite Help Centre forfurtherassistance.
Read through the instructionscarefully
beforeyou begin. Makesureyou haveall the required tools.
Neverusepowertoolsunless instructed.
Identifyand layout all of the components
beforeyou begin assembly. Unless instructed, do not fullytighten screws until the itemisfullyassembled.
Assemblychecklist

www.fantasticfurniture.com.au PAGE4
8x BigCam
Bolt(H1)
4xSmall Cam
Bolt (H10)
8x BigCam
Nut (H2) 8xBig Wood Dowel (H4) 4xSmall Wood Dowel (H5) 8xScrew (H6)
12 xScrew
(H7) 16xScrew (H8) 4xSmall Cam Nut (H9) 2x Metal Handle
(H11) 1xAllen Key
(H12)
4xScrew
(H13) 4xBack Panel Connector(H14)
12 xBolt
(H3)
4xSlide
(H15)
Whatyouneed
toassembletheproduct
Othertoolsyou need
Flat head screwdriver; Phillipshead
screwdriver; Mallet
TopPanel
(P1)
DrawerLeft Side
(P6)
DrawerBack
Panel (P8)
Leg (P11)
Leg (P11)
Leg (P11)
Partlist
Box1: Top Panel (P1); BottomPanel
(P2); Left Side Panel(P3); Right Side
Panel (P4); 2xDrawerFront (P5); 2x
DrawerLeft Side (P6); 2xDrawerRight
Side (P7); 2xDrawerBack Panel (P8);
2xDrawerBase(P9); Back Panel (P10);
4xLeg (P11); Hardware.
(P5)

Step 1
www.fantasticfurniture.com.au PAGE5
Step 2
4xBigCam
Bolt (H1) Phillipshead
screwdriver
Youwillneed
2xBigCam
Bolt (H1)
4xSlide
(H15)
2xBigWood
Dowel (H4)
Phillipshead
screwdriver
Youwillneed
6xScrew
(H7)
Mallet
Screw 4xBig CamBolts(H1)intoTop Panel (P1)asshown.
Separatethe Slide Runners (H15-2)and Slide Tracks (H15-1)fromSlide
(H15)byfollowing the stepsbelow:
Extend the Slide Runnerall the wayforward.
Press the plasticreleaseleverof the slide down and pull the Slide Runner
(H15-2)completelyout.
Insert 2xBig Wood Dowels(H4)intoLeft Side Panel (P3).
Screw 2xBig CamBolts(H1)intoLeft Side Panel (P3).
Attach2xSlide Tracks (H15-1)ontoLeft Side Panel (P3)with6xScrews(H7).

Step 3
www.fantasticfurniture.com.au PAGE6
Step 4
2xBigCam
Bolt (H1)
2xSlide
Track (H15-1)
2xBigWood
Dowel (H4)
Phillipshead
screwdriver
Youwillneed
6xScrew
(H7)
Mallet
4xBigWood
Dowel (H4)
Youwillneed
Insert 2xBig Wood Dowels(H4)intoRight Side Panel (P4).
Screw 2xBig CamBolts(H1)intoRight Side Panel (P4).
Attach2xSlide Tracks (H15-1)ontoRight Side Panel (P4)with6xScrews(H7).
Insert 4xBig Wood Dowels(H4)intoBottomPanel (P2).
Mallet
(P2)
(P4)
(P4)

Step 5
www.fantasticfurniture.com.au PAGE7
Step 6
Youwillneed
Flathead
screwdriver
4xBigCam
Nut (H2)
Position Left Side Panel (P3)and Right Side Panel (P4)ontoBottomPanel (P2),
sothat theirgroovesarealigned.
Insert 4xBig CamNuts(H2)intoBottomPanels(P2)and turnclockwisetolock.
Allen Key
(H12)
12 xBolt
(H3)
Youwillneed
(P2)
(P2)
(P3)
(P3)
(P4)
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.
(P11)
(P11)
(P11)
(P11)
FixeachMetal Leg (P11)toBottomPanel (P2)with3xBolts(H3)using Allen Key(H12).
Withhelp, turnthe assembled unit overcarefully.

Step 7
www.fantasticfurniture.com.au PAGE8
Step 8
Youwillneed
Flathead
screwdriver
4xBigCam
Nut (H2)
Position Top Panel (P1)ontoSide Panel (P3)&(P4)and Back Panel (P10).
Makesurethe Back Panel (P10)fitsintothe grooveunderTop Panel (P1).
Insert 4xBig CamNuts(H2)intoSide Panels(P3)&(P4)and turnclockwisetolock.
(P1)
(P2)
(P3)
(P3)
(P4)
Slide Back Panel (P10)intothe groovesasshown.
(P10)
(P10)
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.
(P4)

www.fantasticfurniture.com.au PAGE9
Step 9
Step 10
4xBack Panel
Connector
(H14)
4xScrew
(H13)
Phillipshead
screwdriver
Youwillneed
4xSmall
CamBolt (H10)
12 xScrew
(H8)
4xSlide
Runner(H15-2)
Phillipshead
screwdriver
Youwillneed
4xSmall
WoodDowel
(H5)
Mallet
Screw 2xSmall CamBolts(H10)
intoeachof the DrawerFronts(P5)
using aPhillipsheadscrewdriver.
Insert 1xSmall Wood Dowel (H5)
intoeachDrawerleft Side (P6)
and DrawerRight Side (P7)asshown.
Attach1xSlide Runner(H15-2)onto
eachDrawerSide (P6)&(P7)
with3xScrews(H8).
(P5)
(P6) (P7)
If necessary, gentlyadjust the Top Panel (P1)sidewayin eitherdirection until XX and YY areequal.
Fixthe Back Panel Connectors (H14)withScrews(H13)asshown.
XX YY
XX =YY

Step 11
www.fantasticfurniture.com.au PAGE10
8xScrew
(H6)
Youwillneed
Phillipshead
screwdriver
Attach1xDrawerSide Panel (P6)and 1xDrawerSide Panel (P7)to
1xDrawerBack Panel (P8)with4xScrews(H6), sothat theirgrooves
areatthesameside.
Repeat forall drawerpanels.
(P6)
(P8) (P7)
Step 12
Slide 1xDrawerBase(P9)intothe groovesin the DrawerPanels(P6), (P7)and (P8).
Repeat withthe otherDrawerBase(P9).
(P6)
(P8)
(P7)
(P9)