fantastic furniture TORONTO Lowline Medium 1400mm User manual

Version 1.0
TORONTO
Lowline Medium 1400mm
fantasticfurniture.com.au

Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 2
fantasticfurniture.com.au
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Love it? Share it!
NOTE: ANY MANDATORY CONSUMER
STATEMENTS, SAFETY REQUIREMENTS OR
WEIGHT RATINGS SHOULD BE ON THIS PAGE.

Useful Information
fantasticfurniture.com.au
Make sure you have all the required tools.
Never use power tools unless instructed.
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3

What you need
to assemble the product
(Tool not provided)
Mallet
(H1)
4 x Gliders
Hardware pack
Please make sure you have all these parts before you start.
Page 4
fantasticfurniture.com.au

4 x Gliders
(H1)
You will need
Mallet
(H1)
(H1)
(H1)
Page 5
fantasticfurniture.com.au
Step 1
Step 2
(H1)
Turn the carton upside down (Bottom up).
Open the carton and remove the pallet (P3).
Use a mallet to nail the gliders (H1) to the legs.

Page 6
fantasticfurniture.com.au
Step 3
Gently turn carton over and remove carton from lowline medium.
Unwrap lowline medium and move into final position. Seek advice from a
qualified trades person on how to attach the safety strap to your specific wall.
Step 4

Page 7
Job Complete !
In the interest of our environment
please dispose of all packing thoughtfully.
fantasticfurniture.com.au