fantastic furniture Java User manual

Version 1.0
Java
Bookcase 4 Shelf 2 Door
fantasticfurniture.com.au
Required
Two People

fantasticfurniture.com.au Page 2
Warning: Ensure the wall strap is attached
to avoid serious injury
To avoid any serious or fatal injury, a wall strap has been provided with
this product to prevent toppling. We strongly recommend that this
product is permanently fixed to the wall or other suitable surface. Fixing
of what fixing device to use.
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Looks like you’ve found
your Fantastic!
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Recommended weight capacity: 20kgs/shelf

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

Parts list
Carton 1:
1 x Top Panel (P1)
1 x Bottom Panel (P2)
2 x Side Panels (P3)
1 x Divider Panel (P4)
2 x Doors (P5)
2 x Back Panels (P10)
4 x Legs (P11)
Carton 2:
1 x Left Fixed Shelf (P6)
1 x Right Fixed Shelf (P7)
2 x Shelf A (P8)
2 x Shelf B (P9)
Top Panel (P1)
What you need
to assemble the product
Other tools you need
Phillips Head Screwdriver
fantasticfurniture.com.au
Page 4
Divider
Panel
(P4)
Left Fixed
Shelf (P6)
Back Panel
(P10)
Side
Panel
(P3)
Bottom Panel
(P2)
Side
Panel
(P3)
Door (P5)
Door (P5)
Right Fixed
Shelf (P7)
Shelf A
(P8)
Shelf B
(P9)
Leg
(P11)
Back Panel
(P10)
Leg (P11)
Leg
(P11)
Leg
(P11) Leg
(P11)
Shelf A
(P8)
Shelf B
(P9)

fantasticfurniture.com.au
Page 5
Hardware Pack
20 x Cam Bolts
(H1)
20 x Cam
Nuts (H2)
20 x Dowels
(H3)
2 x Handles
(H4)
8 x Back Panel
Screws (H6)
12 x Flat Washers
(H9)
8 x Spring
Washers (H10)
4 x Handle
Screws (H11)
1 x Allen Key
(H12)
4 x Felt Pads
(H5)
8 x Bolts
(H8)
4 x Back Panel
Connectors (H7)
2 x Wall Strap
Screws (H14)
8 x Hinges
Screws (H15)
2 x Wall Straps
(H13)
8 x Door
Screws (H16)
4 x Hinges
(H17)
4 x Stoppers
(H19)
16 x Shelf Pins
(H18)
8 x Stopper
Screws (H20)
12 x Stickers
(H21)

Step 1
Page 6fantasticfurniture.com.au
You will need
Attach 4 x Felt Pads (H5) to the bottom of Legs (P11x4)
by removing the adhesive backing and pressing firmly.
Step 2
You will need
8 x Bolts
(H8)
Attach Legs (P11x4) to Bottom Panel (P2) with 8 x Bolts (H8), 8 x Spring Washers (H10)
and 8 x Flat Washers (H9) as shown by tightening with the Allen Key (H12).
(P11)
4 x Felt Pads
(H5)
X4
(H5)
8 x Flat
Washers (H9)
8 x Spring
Washers (H10)
1 x Allen Key
(H12)
(P11)
(H12)
(H8)
(H9)
(H10)
(P2)
(P2)
(P11)
Required
Two People
(P11)
(P11)
(P11)

Step 3
Page 7fantasticfurniture.com.au
You will need
Step 4
You will need
(P2)
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
2 x Stopper
Screws (H20)
1 x Stopper
(H19)
(H1)
(H20)
(H19)
Attach 6 x Cam Bolts (H1) to
Bottom Panel (P2) by tightening with the Phillips Head Screwdriver.
Secure 1 x Stopper (H19) to Bottom Panel (P2) as shown with 2 x Stopper Screws (H20)
by tightening with the Phillips Head Screwdriver.
(H20)
(H19)
(P2)
Attach 6 x Cam Bolts (H1) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Secure 1 x Stopper (H19) to Top Panel (P1) as shown with 2 x Stopper Screws (H20)
by tightening with the Phillips Head Screwdriver.
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
2 x Stopper
Screws (H20)
1 x Stopper
(H19)
(P1)
(H20)
(H19)
(H20)
(H19)
(P2)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)
(H1)

Step 5
Page 8fantasticfurniture.com.au
You will need
8 x Dowels
(H3)
Step 6
You will need
Insert 8 x Dowels (H3) into Left & Right Fixed Shelves (P6&P7) as shown.
Secure 2 x Stoppers (H19) to Left & Right Fixed Shelves (P6&P7) as shown
with 4x Stopper Screws (H20) by tightening with the Phillips Head Screwdriver .
(H3)
(H1)
(P3)
(P7)
(P6)
(H20)
(H20)
(H19)
(H19)
X2
(H20)
(H19)
(P6)
Phillips Head
Screwdriver
4 x Stopper
Screws (H20)
2 x Stopper
(H19)
8 x Dowels
(H3)
4 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Insert 4 x Dowels (H3) into Side Panel (P3) as shown.
Secure 2 x Cam Bolts (H1) to Side Panel (P3)
by tightening with the Phillips Head Screwdriver.
Repeat steps for the second Side Panel (P3).
(H1)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)

Step 7
Page 9fantasticfurniture.com.au
You will need
Insert 4 x Cam Nuts (H2) into
Left & Right Fixed Shelves (P6&P7) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left & Right Fixed Shelves (P6xP7) to Side Panels (P3x2)
by tightening the cam nuts with the Phillips Head Screwdriver.
Step 8
You will need
Insert 4 x Dowels (H3) into Divider Panel (P4).
Attach 2 x Cam Bolts (H1) to Divider Panel (P4)
as shown by tightening with the Phillips Head Screwdriver.
Carefully turn the Divider Panel (P4) over and attach
the remaining 2 x Cam Bolts (H1) by tightening with the Phillips Head Screwdriver.
4 x Cam
Nuts (H2)
(H2)
(P6)
(P7)
4 x Dowels
(H3)
4 x Cam Bolts
(H1)
Phillips Head
Screwdriver
(P4)
(P4)
(H3)
(H1)
Phillips Head
Screwdriver
Ensure the raw edge of the shelves
are at the back of the bookcase
before securing
(H1)
(H1)
(H1)
(H3)
(H3)
(H3)
(H2)
(H2)
(H2)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P3)
(P3)
Laminated
edge

Step 9
Page 10fantasticfurniture.com.au
You will need
Insert 4 x Cam Nuts (H2)
into Left & Right Fixed Shelves (P6&P7)
as shown. Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Left & Right Fixed Shelves (P6xP7) to Divider Panels (P4)
by tightening the cam nuts with the Phillips Head Screwdriver.
Step 10
You will need
4 x Cam
Nuts (H2)
6 x Cam
Nuts (H2)
(P4)
(P3)
(P3)
(P2)
(P6)
(P4)
(P7)
(H2)
Ensure the raw edge of the shelves are
at the back of the bookcase before securing
Insert 6 x Cam Nuts (H2) into Side
Panels (P3x2) and Divider Panel (P4) as shown.
Rotate the cam nuts so the arrows
point towards the incoming cam bolts.
Attach Side Panels (P3x2) and Divider Panel (P4)
to Bottom Panel (P2) as shown by tightening
the cam nuts with the Phillips Head Screwdriver.
Required
Two People
Required
Two People
Raw
edge
Phillips Head
Screwdriver
Phillips Head
Screwdriver
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)
(H2)