fantastic furniture Seaforth Bookcase 5 shelf User manual

Version 2.0
www.fantasticfurniture.com.au
Bookcase 5 shelf
Seaforth

www.fantasticfurniture.com.au PAGE 2www.fantasticfurniture.com.au PAGE 2
Enjoy
Your purchase from
Australia’s Best Value Furniture Store
RECOMMENDED WEIGHT CAPACITY 15 KG PER SHELF
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been fitted with a wall
strap to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are
not included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to
use.

www.fantasticfurniture.com.au PAGE 3
Assembly checklist
Read through the instructions carefully
before you begin.
Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
Useful Information
! Never use power tools unless specically instructed. They can damage your components or
hardware if used incorrectly
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used in as they may not t through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any di󰀩culties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.

www.fantasticfurniture.com.au PAGE 4
What you need
to assemble the product
Left side frame
(P1)
Square
frame bar
(P9)
Right side frame
(P2)
Top/bottom shelf
(P10)
Top/bottom shelf
(P10)
Top front frame Bar
(P3)
Shelf
(P11)
Shelf
(P11)
Shelf
(P11)
Shelf
(P11)
Top back frame Bar
(P4)
Bottom back frame
Bar (P5)
Bottom front frame
Bar (P6)
Vertical
frame bar
(P7)
Horzontal frame bar
4 x (P8)
Parts list
Box 1: Left Side Frame (P1); Right Side Frame (P2); Top Front Frame Bar (P3); Top Back Frame Bar (P4);
Bottom Back Frame Bar (P5); Bottom Front Frame Bar (P6); Vertical Frame Bars (P7 x 6);
Horizontal Frame Bars (P8 x 8); Square Frame Bars (P9 x 2) Top and Bottom Shelves (P10 x 2); Shelves (P11 x 4).
Shelf screws
28 × (H1)
Frame screws
36 × (H2)
Allen key
1 × (H3)
Wall strap
2 × (H4)
Nut
2 × (H5)
Washer
4 × (H6)
Wall strap
screw
2 × (H7)
Other tools you need
Phillips head screwdriver
Horzontal frame bar
4 x (P8)
Square
frame bar
(P9)
Vertical
frame bar
(P7)
Vertical
frame bar
(P7)
Spanner
1 × (H8)
Allen key
1 × (H9)

www.fantasticfurniture.com.au PAGE 5
You will need
Frame screw
8 × (H2)
Allen key
1 × (H3)
Step 1
Attach Top Front & Back Frame Bars (P3 & P4) to the Left Side Frame (P1) using
Frame Screws (H2) by tightening with the Allen Key (H3).
Attach Bottom Front & Back Frame Bars (P5 & P6) to the Left Side Frame (P1) using
Frame Screws (H2) by tightening with the Allen Key (H3).
Repeat above steps to attach the Right Side Frame (P2).
(H2)
(P3)
(P6)
(P4)
(P5)
(H2) (H2)
(H2)
(P2)
(P1)
(H2)
(H2) (H2)
(H2)
Note: Please only tighten the Frame
Screws (H2) 80%, when shelves
have been added, the frame screws
(H2) can be tightened 100%
NOTE: Before securing, ensure that the protruding
metal screw tabs on the Top and bottom frame bars
(P3, P4. P5 and P6) are rotated so the tabs are facing
the inside of the bookcase. These will be used to
secure and support the Top and bottom shelves (P10).
80%
80%
NOTE: During transit the metal screw
tabs may become slightly bent.
Ensure screw tabs on all frame bars
are straight before securing screws.

www.fantasticfurniture.com.au PAGE 6
Step 2
Attach Vertical Frame Bars (P7 x 2) to Bottom Front & Back Frame Bars (P5 & P6)
using Frame Screws (H2) by tightening with the Allen Key (H3).
Attach horizontal Frame Bars (P8 x 2) to the Vertical Frame Bars (P7) and Left
Side Frame (P1) using Frame Screws (H2) by tightening with the Allen Key (H3).
Ensure the larger screw holes on the Frame Bars (P8 x 2) are facing upwards on
all bars before securing.
You will need
Frame screw
6 × (H2)
Allen Key
1 × (H3)
(P1)
(H2)
Note: Please only tighten the Frame
Screws (H2) 80%, when shelves
have been added, the frame screws
(H2) can be tightened 100%
(P8)
(P5)
(P6)
(P7)
(H2)
(H2) (H2)
(H2)
(H2)
80%
Note: Please ensure
the larger screw holes
on the Frame Bars
(P8 x 2) are facing
upwards on all bars
before securing.

www.fantasticfurniture.com.au PAGE 7
Step 3
(P1)
(H2)
Note: Please only tighten the Frame
Screws (H2) 80%, when shelves
have been added, the frame screws
(H2) can be tightened 100%
(P8)
(H2)
You will need
Frame screw
2 × (H2)
Allen Key
1 × (H3)
Attach Horizontal Frame Bars (P8 x 2) to the Left Side Frame (P1) using Frame
Screws (H2) by tightening with the Allen Key (H3).
Ensure the smaller screw holes on the Frame Bars (P8 x 2) are facing upwards on
all bars before securing.
80%
Note: Please ensure
the smaller screw holes
on the Frame Bars
(P8 x 2) are facing
upwards on all bars
before securing.

www.fantasticfurniture.com.au PAGE 8
Step 4
Attach Square Frame (P9) to the end of the Frame Bars (P8 x 4) using Frame
Screws (H2) by tightening with the Allen Key (H3).
(P9)
(H2)
Note: Please only tighten the Frame
Screws (H2) 80%, when shelves
have been added, the frame screws
(H2) can be tightened 100%
(P8)
(P8) (H2)
(H2)
(H2)
You will need
Frame screw
4 × (H2)
Allen Key
1 × (H3)
80%

www.fantasticfurniture.com.au PAGE 9
Step 5
Attach Vertical Frame Bars (P7 x 2) to the Horizontal Frame Bars (P8 x 2)
using Frame Screws (H2) by tightening with the Allen Key (H3).
(P7)
(H2)
Note: Please only tighten the Frame
Screws (H2) 80%, when shelves
have been added, the frame screws
(H2) can be tightened 100%
(P8)
(H2)
You will need
Frame screw
2 × (H2)
Allen Key
1 × (H3)
80%

www.fantasticfurniture.com.au PAGE 10
Step 6
Attach Horizontal Frame Bars (P8 x 2) to the Vertical Frame Bars (P7 x 2)
and the right side Frame (P2) using Frame Screws (H2) by tightening with
the Allen Key (H3).
Ensure the larger screw holes on the Frame Bars (P8 x 2) are facing
upwards on all bars before securing.
(P7)
(H2)
Note: Please only tighten the Frame
Screws (H2) 80%, when shelves
have been added, the frame screws
(H2) can be tightened 100%
(P2)
(P8)
(H2)
(H2)
(H2)
You will need
Frame screw
4 × (H2)
Allen Key
1 × (H3)
80%
Note: Please ensure
the larger screw holes
on the Frame Bars
(P8 x 2) are facing
upwards on all bars
before securing.