fantastic furniture Milford Pantry 1 Door User manual

0. 1 noisreV
fantasticfurniture.com.au
Milford
Pantry 1 Door

Weight Limit: 20kgs per shelf
Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.

Page 3
fantasticfurniture.com.au
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
@fantasticfurniture

Page 4
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2 for any safety requirements or weight restrictions.
fantasticfurniture.com.au
Useful information

t Side Panel (P1);
12
j ustable Shelves (P7);
4 x Cam Nuts
Page 5
What You Need
to assemble the product
Other tools you need
Phillips head
Hammer.
Right Side Panel (P2);
Door (P9)
Back Panel (P6);
4 x Cam Bolts 12 x
Dowels 3 x Hinges 12 x Screws x Shelf Supports
1 x Handle 2 x Screws 34 x Nails 1 x Wall Strap 1 x Wall Strap
Screw 4 x Caps
2 x Washers
Le t Side Panel
Right Side Panel
(P2)
(P3)
(P1)
(P7)
Back Panel
(P6)
Bottom Panel
(P4)
Bottom Panel (P4);
(H1)
(H2) (H3)
(H4) (H5) (H6)
(H7) (H11) (H12)
(H13)
4 x F eet (P8);
fantasticfurniture.com.au
Hardware Pack :
Top Panel
(P8)
Door
(P9)
F oot
(P8)
F oot (P8)
F oot
(H8) (H9) (H10)
(H14) (H15) (H16)
8 x Screws 4 x Screws 1 x A llen K ey
F ixed Shelf
(P7)
3 x A d
j ustable Shelf
A d
(P5)
(H17)
2 x Screws
Le
Top Panel (P3);
F ixed Shelf (P5);
j ustable Shelf
A d
screwdriver

Phillips Head crewdriver.Insert 8 x D owels (H3) into L eft & Right ide Panels (P1 & P2 ).
(H3)
Page 6
Step 1
Step 2
You will need
8 x Dowels
You will need
Phillips head
screwdriver
3 x Hinges
(H4) (H5)
6 x Screws
1 x Handle
(H7) (H8)
2 x Screws
(H3)
(P9)
(P1)
(P2)
(H3) (H3)
(H8)
(H7)
(H4)
(H5)
(H8)
fantasticfurniture.com.au
(H4)
(H5)
(H5)
(H3)
(H3)
(H3)
(H3)
(H3)
(H4)
(H5)
(H4)
(H5)
Phillips head
screwdriver
4 x Cam Bolts
(H2)
(H2)
(H2)
(H2)
(H2) (H2)
Attach 3 x Hinges (H4) to oor (P9 ) as shown with 6 x crews (H5 ) by tightening with the Phillips
Head crewdriver. ecure 1 x Handle (H7 ) to the front of oor (P9 ) with 2 x crews (H8 ) by
S
D
S S D S
tightening with the Phillips Head crewdriver.
S
Attach 4 x Cam Bolts (H2 ) to L eft & Right S ide Panels (P1 & P2 ) as shown by tightening with the
S S

Page 7
Step 3
Step 4
You will need
4 x Dowels
(H1)
(H3)
fantasticfurniture.com.au
4 x Cam Nuts
(P5) (H3)
(H3)
(H3)
(H3)
(P1)
(P5)
(P2)
You will need
Phillips head
screwdriver
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut.You
then turn the cam
nut so it tightens
overthe bolt.
Insert 4 x owels (H3) into ix ed helf (P5 ).
D S F
E nsure the raw edges of side & shelf
panels are at the back of the unit and Cam
Nuts are on the underside of the shelf
before securing
(H2)
(H1)
(H1)
(H1)
Insert 4 x Cam Nuts (H1) into Fixed Shelf (P5).Rotate the Cam Nuts so the arrows point
towards the incoming cam bolts.Attach Left & Right Side Panels (P1&P2) to Fixed Shelf
(P5) by tightening the Cam Nuts with the Phillips Head Screwdriver.

Step 5
Page 8
Step 6
You will need
fantasticfurniture.com.au
(P1)
(P2)
(P3)
Phillips head
screwdriver
(P4)
8 x Screws
(H14)
(H14)
(H14)
(H14)
(H14)
(H14)
(H14)
(H14)
(P4 )
(P8)
(H16 )
(H15)
You will need
(H15) (H16)
4 x Screws 1 x A llen K ey
Attach Feet (P8x4) to Bottom Panel (P4) with 4 x Screws (H15) by tightening with the
Allen Key (H16).
Attach Top & Bottom Panels (P3&P4) to Left & Right Side Panels (P1&P2) as shown with 8 x
Screws (H14) by tightening with the Phillips Head Screwdriver.
Top
Bottom
E nsure the raw edges of top&
bottom panels are at the back
before securing
of the unit
(P8)
(P8)
(P8)

(P8)
Page 9
Step 7
Step 8
fantasticfurniture.com.au
You will need
4 x Caps
(H12)
(H12)
(H12)
(H12)
(H12)
(P8)
(P8)
(P8)
You will need
Hammer
34 x Nails
(H9)
Phillips head
screwdriver
2 x Screws
(H17)
(P2)
(P6)
(P4)
outwards
Ensure the raw side
of back panel is facing
(H17)
5
5
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
(H9)
W
ARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixingdevices are not
includedsince different surface materials require
differentattachments. Pleaseseek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
Pre - drilled guide
holes for
Screw(H17)
Attach 4 x Caps (H12) to Feet (P8x4) by pressing firmly into place.Ensure they are
secured well.
Align Back Panel (P6) with the edges of the partially assembled unit and the pre-drilled
holes with the back of the fixed shelf.Attach Back Panel (P6) to the back of Fixed Shelf (P5)
with 2 x Screws (H17) by tightening with the Phillips Head Screwdriver.Attach Back Panel (P6)
to Left,Right,Top&Bottom Panels (P1,P2,P3&P4) with 34 x Nails (H9) with the Hammer.Ensure
the nails are evenly spaced out as shown and are placed approximately 5mm from the edge of
the back panel.

Page 10
Step 9
Step 10
fantasticfurniture.com.au
You will need
12 x Shelf Supports
(H6)
(H6)
(P2)
(P7)
(P7)
(P7)
(P1)
You will need
6 x Screws
(H5)
(P9)
(H5)
(H5) (H4)(H4)
(P2)
(H6 )
(H6 )
(H6 )
Insert 12 x Shelf Supports (H6) to Left & Right Side Panels (P1&P2) as shown at your desired
height. Place Ad ustable Shelves (P7x3) into the unit and rest on shelf supports. Ensure the
shelves are firmly secured.
With assistance carefully align the 3 x Hinges (H4) on the Door (P9) to Right Side Panel (P2)
and secure with 6 x Screws (H5) by tightening with the Phillips Head Screwdriver.
Phillips head
Screwdriver
j