fantastic furniture Ashford Lowline Medium User manual

Version2.0
Ashford
LowlineMedium
www.fantasticfurniture.com.au

Enjoy
Yourpurchasefrom
Australia sBest Value FurnitureStore
PAGE2
www.fantasticfurniture.com.au
WARNING: ENSURETHEWALL STRAP ISATTACHEDTO
AVOIDSERIOUSINJURY.
Toavoid anyseriousor fatal injury,thisproducthasbeenprovided witha
wallstraptopreventtoppling.Westronglyrecommendthatthis product is
permanentlyfixedtothewallorothersuitablesurface.Fixing devices are
notincludedsincedifferentsurfacematerialsrequire different attachments.
Pleaseseekprofessionaladviceifyouare indoubtofwhat fixing deviceto
use.

PAGE3
Assemblychecklist
Useful Information
Readthrough theinstructionscarefully
beforeyoubegin. Makesureyouhave alltherequiredtools.
Never use powertoolsunlessinstructed.
Identifyand layout all ofthecomponents
beforeyoubeginassembly. Unless instructed,do notfullytighten screws until the item isfullyassembled.
! Neveruse powertoolsunless specificallyinstructed.They can damage yourcomponentsor
hardwareif used incorrectly.
! The most common mistakes made during assemblyareusing the wrong hardwareorgetting
componentsback tofront.
! Always use asoft surface (such as carpet orcardboard)when assembling yourproduct to
avoidscratching ordamaging the surface of the product.
! Bulky itemssuch as wardrobes and bunk bed shouldbe assembled inthe roomthey will be
used inas they may not fit through adooronce assembled.
! Neveruse any glue until you arecertainthat the partsbelong together.
! Periodicallycheck and re-tighten all fasteners. Check the product carelabel orwebsitefor
product careinstructions.
! If you arehaving any difficulties assembling yourproduct, missing any hardwareor
componentsplease visit ourwebsiteHelpCentreforfurtherassistance.

PAGE4
What YouNeed
ToAssembletheProduct
www.fantasticfurniture.com.au
Pleasemakesureyouhaveallthesepartsbeforeyou start.
(Additional ToolsRequired)
PhillipsHeadScrewdriver
Mallet
TopPanel
(P1)
Left
Side(P2)
Right
Side(P3)
Front
Rail(P4)
Big
Shelf(P5)
Centre
Divider(P6)
Centre
Divider(P6)
Small
Shelf(P7)
Bottom
Panel(P8)
Front
Plinth(P9)
Side
Plinth(P10)
Side
Plinth(P10)
Support
Leg(P11)
Door
(P12)
Door
(P12)
UpperBack
Panel(P13)
Bottom
Back
Panel(P14)
30x Wooden
Dowels
(H3)
32xCam
Bolts
(H1)
2x
DoorMagnet
(H5)
4xWood
Screws
(H10)
4xHinge
(H11)
2xWood
Screws
(H7)
4xBack
Panel Suport
(H9)
16xWood
Screws
(H12)
4xScrews
(H13) 2xHandles
(H14)
4xWood
Screws
(H15)
2x
AngleIron
(H16)
8xWood
Screws
(H17)
1x
Wall Strap
(H18)
1xWood
Screws
(H19)
12x Wood
Screws
(H4)
2xWasher
(H20)
6x20mm
PartLIst
Box1:
Top Panel(P1); Left Side (P2);
Right Side (P3); Front Rail (P4);
BigShelf (P5); 2xCentreDivider
(P6); Small Shelf(P7); Bottom
Panel(P8); Front Plinth(P9); 2x
Side Plinth(P10); Support Leg
(P11); 2xDoor(P12); Upper
Back Panel(P13); BottomBack
Panel(P14)
32xCam
Nuts
(H2)
4xWood
Screws
(H6)
2xWasher
(H8)

Step 2
You will need:
PAGE5
www.fantasticfurniture.com.au
Step 1
You will need:
4x Cam
Bolts
(H1) (P6)x2
12x Wooden
Dowels
(H3)
(P7)
(P6)
(P6)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
4x Cam
Nut
(H2)
Phillipshead
screwdriver
Mallet
Phillipshead
screwdriver
Veneer banding
edge faceup

Step 4
You will need:
PAGE6
www.fantasticfurniture.com.au
Step 3
You will need:
4x Cam bolts
(H1)
10x Wooden
Dowels
(H3) (P8)
(P11) (H3)x2 (H3)x8
(H1)x4
(P8)
(P11)
(P8)
(H4)x2
2x Wood
Screws
(H4)
Phillipshead
screwdriver
Mallet
Phillipshead
screwdriver

Step 6
You will need:
PAGE7
www.fantasticfurniture.com.au
Step 5
You will need:
4x Cam bolts
(H1)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
(P8)
(H2)x4
4x Cam
Nut
(H2)
Phillipshead
screwdriver
Phillipshead
screwdriver

Step 8
You will need:
PAGE8
www.fantasticfurniture.com.au
Step 7
You will need:
(P8)
(P6)
(P6)
(P7)
4x Cam
Nut
(H2)
(H2)x4
(P5)
(H3)x4
(H1)x4
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
4x Cam bolts
(H1)
4x Wooden
Dowels
(H3)
(H5)
(H5)
(H6)x2
(H6)x2
4x Wood
Screws
(H6)
2x Door
Magnet
(H5)
Phillipshead
screwdriver
Phillipshead
screwdriver
Mallet
Veneer banding
edge faceup

Step10
You will need:
PAGE9
www.fantasticfurniture.com.au
Step 9
You will need:
(P5)
(P6)
(P6)
(H2)x4
(P8)
4x Cam
Nut
(H2)
(P2)
(P3)
(H3)x2 (H3)x2
(H1)x5
(H1)x5
10x Cam bolts
(H1)
4x Wooden
Dowels
(H3)
(H16)
(H17) x2
(H17) x2
(H16)
2x
AngleIron
(H16)
4x Wood
Screws
(H17)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
Phillipshead
screwdriver
Phillipshead
screwdriver
Mallet
InsertWoodenDowels(H3)toLeftSide(P2)andRightSide(P3), Screw inCam Bolts
(H1)toLeftSide(P2)andRightSide(P3).FixAnglelron(H16)toLeft Side (P2) and
RightSide(P3)byusingWoodScrews(H17).

Step12
You will need:
PAGE10
www.fantasticfurniture.com.au
Step11
You will need:
(P2)
(P10)
(H4)x3
3x Wood
Screws
(H4)
(P2)
(P5)
(P8)
5xCam
Nut
(H2)
Thisishowacamnutworks........
The head of the cam
bolt goesintothe open
mouthof the camnut.
You then turnthe cam
nut soit tightensover
the bolt.
(H2)x5
Phillipshead
screwdriver
Phillipshead
screwdriver
Bevellededgeon
sideplinthfaceup