fantastic furniture Park User manual

Version 1.0
Park
Hall Table Rectangle
fantasticfurniture.com.au
APPROVED LP 14/04/2022

Secure it!
Wall attachment guide
For dry wall or plaster
(with available wood stud)
For masonry wall
Solid wall: Plug with screw.
Recommendation: a red plug with
available at
your local hardware store.
Hollow wall: Spring toggle
Screw directly into stud.
Recommendation 5 mm wood
screw available at your local
hardware store.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, a wall strap has been provided with this product
to prevent toppling. We strongly recommend that this product is permanently fixed
you are in doubt of what fixing device to use.
Tips to further reduce the risk of furniture tip-over accidents:
•Discourage children from climbing or hanging on furniture.
•Keep your heaviest items in the bottom drawers or shelves.
•Do not place TVs or heavy items on top of the furniture.
•Use locking devices on drawers to discourage small children from using them as steps.
Reduce the risk of furniture
tip-over accidents
For dry wall or plaster
(without available wood stud)
Drill and insert spring toggle
or hollow wall anchor available at
your local hardware store.
2egaP 2egaPfantasticfurniture.com.au
Recommended weight capacity for shelf and metal box: 10kg

fantasticfurniture.com.au Page 2Page 3
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 4
fantasticfurniture.com.au

What you need
to assemble the product
Page 5fantasticfurniture.com.au
Hardware pack

Page 6
Step 1
fantasticfurniture.com.au
Align the holes on the table top frame (P2) with the holes on 2 x side frames (P1) as shown.
Secure with 8 x short bolts (H2) using allen key (H3).
Do not fully tightening the bolts yet.

Page 7
Step 2
fantasticfurniture.com.au
Align the holes on the metal sheet (P3) with the holes on 2 x side frame (P1) as shown.
Secure with 4 x long bolts (H1) using allen key (H3).
You may now fully tighten all the bolts using allen key (H3).

Page 8
Step 3
fantasticfurniture.com.au
Carefully turn the assembled frame upright.
Align the holes on the metal box (P4) to the holes on the table top frame (P2) as shown.
Secure together using 4 x short bolts (H2), completely tightening with allen key (H3).

Page 9
Step 4
fantasticfurniture.com.au
Place the perforated insert (P5) onto the metal box (P4) as shown, ensuring
the grooves on the perforated insert (P5) slot into place.

Page 10
Step 5
fantasticfurniture.com.au
The perforated insert (P5) can be moved as required.