Feig Electronic cVEND plug User manual

INSTALLATION
Preliminary
Confidential
2015-02-20 - cVEND plug - User manual.docx
cVEND plug
Contactless Payment and Ticketing Module

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 2 of 24
cVEND plug - User manual.docx
Note
Copyright 2014 by
FEIG ELECTRONIC GmbH
Lange Strasse 4
D-35781 Weilburg
Tel.: [phone]
http://www.feig.de
With the edition of this document, all previous editions become void. Indications made in this manual may be
changed without previous notice.
The reproduction, distribution and utilization of this document as well as the communication of its contents to
others without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or design.
Composition of the information in this document has been done to the best of our knowledge. FEIG
ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this
manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,
despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC
GmbH does not give any guarantee promise for perfect function in cross environments and does not give
any guaranty for the functionality of the complete system which incorporates the subject of this document.
FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed
with components and testing methods for a level of reliability suitable for use in or in connection with surgical
implants or as critical components in any life support systems whose failure to perform can reasonably be
expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application
designer must take reasonably prudent steps to protect against system failures.
FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this
document and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH
does not convey any license under its patent rights nor the rights of others.
All brand names, trademarks or logos are property of their respective owners.
Contact:
Commercial Questions: [email protected]
Technical Questions: [e-mail]

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 3 of 24
cVEND plug - User manual.docx
Contents
1. Warnings - Read before start-up ! 4
1.1. Safety Instructions ............................................................................................................4
1.2. Security Instructions.........................................................................................................4
2. Characterization 5
3. Mechanical Integration 7
3.1. Dimensions........................................................................................................................9
4. Connection 10
4.1. Connector X1 - Ethernet Interface.................................................................................. 11
4.2. Connector X2 - USB Device Interface ............................................................................ 12
4.3. Connector X3 - RS232 V.24 (UART#1) Interface............................................................13
4.4. Connector X4 - RS232-LVTTL (UART#0) Interface ........................................................ 14
4.5. Connector X5 –Power Supply Vcc................................................................................. 15
4.6. Wake-Up...........................................................................................................................16
4.7. Connector X6, X11, X12 - Extension Interfaces............................................................. 17
4.7.1. Connector X6 - RGB Display (cVEND plug flex only).................................................17
4.7.2. Connector X11 - SAM and SD Interface.....................................................................18
4.7.3. Connector X12 - Auxiliary Interfaces..........................................................................18
5. Technical Data 19
5.1. Standard Compliance......................................................................................................20
5.2. Radio Approvals.............................................................................................................. 20
5.2.1. Europe (CE)...............................................................................................................20
5.2.2. USA (FCC) and Canada (IC)......................................................................................21
6. cVEND plug SAM Extension - Option 23

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 4 of 24
cVEND plug - User manual.docx
1.
Warnings - Read before start-up !
1.1.
Safety Instructions
The device may only be used for the intended purpose designed for by the
manufacturer.
The operation manual should be conveniently kept available at all times for each user.
Unauthorized changes and the use of spare parts and additional devices which have not
been sold or recommended by the manufacturer may cause fire, electric shocks or
injuries. Such unauthorized measures shall exclude any liability by the manufacturer.
The liability-prescriptions of the manufacturer in the issue valid at the time of purchase
are valid for the device. The manufacturer shall not be held legally responsible for
inaccuracies, errors, or omissions in the manual or automatically set parameters for a
device or for an incorrect application of a device.
Repairs may only be executed by the manufacturer.
Installation, operation, and maintenance procedures should only be carried out by
qualified personnel.
Use of the device and its installation must be in accordance with national legal
requirements and local electrical codes .
When working on devices the valid safety regulations must be observed.
Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you
should keep a minimum distance of 25 cm between the device and your cardiac pace-
maker and not stay in an immediate proximity of the device respective the antenna for
some time.
1.2.
Security Instructions
DO NOT DISASSEMBLE ANY PART! The device contains a battery-powered security
circuited. The security circuit will be triggered if security relevant parts are
disassembled. In such cases the device stops regular operation and can be reactivated
only by the manufacturer in a certified secure environment.

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 5 of 24
cVEND plug - User manual.docx
2.
Characterization
The cVEND plug is a secure contactless module for contactless credit cards (open-loop) and public
transport tickets (closed-loop). It fulfills the newest functional and security related payment card
industry standards.
cVEND plug is designed for flush integration into non conducting housings. It is EMVCo contact-
less certified, if installed according the guidelines described in this manual.
cVEND plug is available in two versions:
cVEND plug flex
The cVEND plug flex is a flexible secure platform to
develop a payment and ticketing solution. Due to the
variety of interfaces and the open SDK cVEND plug
flex can be the core element for a terminal. direct
connection of color or monochrome displays, touch
screens, external scanners or other peripheral com-
ponents are possible.
cVEND plug reader
The cVEND plug reader is a secure contactless
reader for payment and ticketing applications which
includes an EMVCo contactless Level 2 kernel for
credit card processing. The cVEND plug reader of-
fers an easy to use secure protocol and can be used
in payment mode as well as in transparent card
reader mode which makes it suitable for payment
and ticketing applications.

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 6 of 24
cVEND plug - User manual.docx
Fig. 1: cVEND plug front view - not installed
Fig. 2: cVEND plug rear view - not installed
Table 1: Interfaces and connectors
Label
Description
1
LEDs (4 x green, 1 x yellow, 1 x red)
2
From outside visible, illuminated plastic dome “Plug”
X1
Ethernet Interface (10 / 100 Base-T network port)
X2
USB Device Interface
X3
RS232 V.24 (UART#1) Interface
X4
RS232-LVTTL (UART#0) Interface
X5
Power Supply 5V DC
X6
Connector for RGB Display (cVEND plug flex only)
X11
Connector for SAM / SD-Card Extension Board
X12
Connector for Auxiliary Interfaces
1
2
X11
X2
X1
X6
X12
X4
X5
X3

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 7 of 24
cVEND plug - User manual.docx
3.
Mechanical Integration
For flush integration into non conducting housings one
round opening with a diameter of 28,5 mm is neces-
sary to show the back-lit contactless symbol. cVEND
plug is installed from inside the housing. cVEND plug
is designed for front plates with 3 mm thickness.
cVEND plug has to installed from inside the housing. If
the LEDs of cVEND plug shall be used, additional light
channels are to be provided.
NOTICE
To comply with EMVCo regulations:
The contactless logo must be visible.
The upper edge of the cVEND plug plastic dome and the target terminal front plate
must be on the same level.
Avoid any kind of conducting material surrounding the cVEND plug.
Do not use conducting materials for fastening.
The following figure shows cross-sectional view of cVEND plug plastic dome (1) flush installed into
target terminal front plate (2)
Fig. 3: cVEND plug (1) installed in front plate (2) - cross-sectional view
2
1

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 8 of 24
cVEND plug - User manual.docx
The cVEND plug front consists of a silicon rubber mat (1) with integrated sealing (2) and a fixed
poly carbonate plastic dome (3) which shows the back-lit contactless symbol.
Fig. 4: Plug front with sealing (red colored)
For fastening the cVEND plug front has to be pressed tight against the housing front. Therefore a
clamp range of 2,5 mm (fastening area) on all sides of the cVEND plug antenna PCB is available.
The following figure shows the clamp range (red marked). The picture on the left side shows the
back view, the picture on the right side is perspective view. For detailed dimension see Chapter
3.1. Dimensions. 3D STEP Data are available on request.
Fig. 5: cVEND plug fastening area (red marked)
1
3
2

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 9 of 24
cVEND plug - User manual.docx
3.1.
Dimensions
Fig. 6: cVEND plug front with LED position
Fig. 7: cVEND plug rear and side view (without cVEND SAM Extension Board)

Installation
cVEND plug
FEIG ELECTRONIC GmbH
Page 10 of 24
cVEND plug - User manual.docx
4.
Connection
The connector I/O PINs are described from the cVEND plug view. A cVEND plug input must be
connected to one output or vice versa.
Fig. 8: cVEND plug - connector location
Fig. 9: cVEND plug with optional SAM Extension Board
SAM1
SAM2
SAM3
SAM4
µSD
X6
1
38
38
1
6 5 4
3 2 1
4 3
2 1
2
1
1 2 3 4 5 6
X1
X11
X2
X3
X4
X5
X12
1
38