Fisher-Price Kick'n Crawl Aquarium C3068 User manual

Crawl-Through Aquarium
2
1
w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
Kick'n Crawl™Aquarium
To prevent entanglement injury, never place
play quilt in a crib or playpen.
Never add strings, ties or other products to this item.
WARNING
Assembling the Play Quilt
Attaching the Activity Toys
Tubes
Ball
Support
Support
Slots
Straps
Play Quilt
Activity Toys
Activity Toy Straps
•Place the play quilt print side up on a flat surface.
•Fit the two straps on each side of the play quilt down through the slots in the
supports. Make sure the tab at the end of each strap forms a “T” under the
support. Pull up on the play quilt to be sure it is secure to the supports.
•Fit the two small fastener straps on
each end of the tubes through the
slots inside the circular opening in
the supports. Fasten the fastener
straps together to secure the tubes
to the supports.
Fastener Straps
Fastener Straps
Bottom View
Center Activity Toy Strap
“T” Tab
Octopus Activity Toy
Roller Ball
• Locate the tube with three activity straps.
• Insert the center strap on the tube through the slot in the top of the octopus
activity toy. Make sure the tab at the end of the strap forms a “T” under the slot.
•Pull firmly on the octopus activity toy to be sure it is secure.
•Spin the roller ball on the octopus activity toy to hear lively music!
•Fasten the remaining activity toys to the other two activity toy straps on the tube.
• Squeeze the stem to inflate the ball, then fasten it to the activity toy strap on the
other arch.
Floor Quilt
C3068
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
No tools needed for assembly.
For ages birth and up.
3
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA C3068a-0920
C3068a-0920.qrk 11/14/03 9:40 AM Page 1

2
To prevent entanglement injury, never place
play quilt in a crib or playpen.
Never add strings, ties or other products to this item.
WARNING
Assembling the Play Quilt
Tubes
Ball
Support
Support
Slots
Straps
Play Quilt
Activity Toys
Activity Toy Straps
•Place the play quilt print side up on a flat surface.
•Fit the two straps on each side of the play quilt down through the slots in the
supports. Make sure the tab at the end of each strap forms a “T” under the
support. Pull up on the play quilt to be sure it is secure to the supports.
•Fit the two small fastener straps on
each end of the tubes through the
slots inside the circular opening in
the supports. Fasten the fastener
straps together to secure the tubes
to the supports.
Fastener Straps
Fastener Straps
Bottom View

Attaching the Activity Toys
Center Activity Toy Strap
“T” Tab
Octopus Activity Toy
Roller Ball
• Locate the tube with three activity straps.
• Insert the center strap on the tube through the slot in the top of the octopus
activity toy. Make sure the tab at the end of the strap forms a “T” under the slot.
•Pull firmly on the octopus activity toy to be sure it is secure.
•Spin the roller ball on the octopus activity toy to hear lively music!
•Fasten the remaining activity toys to the other two activity toy straps on the tube.
• Squeeze the stem to inflate the ball, then fasten it to the activity toy strap on the
other arch.
3
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA C3068a-0920

4
Assembling the Crawl-Through Aquarium
Tube
Support
Slots
Plastic Tab
Sleeve
Ball Plastic Tab
Fastener Straps
Fastener Straps
Activity Toys
Activity Toy Straps
•Slide the tubes through the sleeves in each side of the play quilt.
•Position the supports so that the sides with the slots face inward.
•Fit the two small fastener straps on each end of the tubes through the slots
inside the circular openings in the supports. Fasten the fastener straps together
to secure the tubes to the supports.
•Fit the plastic tabs at the corners of the play quilt into the slots in the supports.
•Fasten the activity toys to the activity toy straps.

Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy.
To avoid battery leakage:
•Never short-circuit the battery terminals.
•Do not charge non-rechargeable batteries.
•Do not dispose of this toy in a fire. The batteries inside may explode or leak.
5
Carry-Along
•Place the play quilt print side up on a flat surface.
•Attach the activity toys to the straps on the sides of the play quilt and place the
toys on top of the quilt.
•Locate the fastener strap at one end of the play quilt. Place the supports and
tubes at the opposite end of the play quilt and roll the play quilt from end
to end.
•Fit the fastener strap through the loop on the outside of the play quilt and
fasten to close.
Fastener Strap

Questions? We'd like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to: Fisher-Price®Consumer Relations,
636 Girard Avenue, East Aurora, New York 14052.
For countries outside the United States:
CANADA: Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Consumer Information
•Machine-wash the play quilt in cold water on the gentle cycle. DO NOT use
bleach. Tumble dry on low heat.
•Surface wash the tubes, activity toys and supports with a mild cleaning solution.
•This toy has no consumer serviceable parts. Please do not take this toy apart.
Care
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
6