Friant AMENITY User manual

1
User Guide and Assembly Instructions
AMENITY
Please note:
Remove all items from cartons. Verify all pieces before assembling
Beware of the product surface, especially the painted and polish
parts when assembling
The assembled part of the gas lift is non-metal. Beware not to
beat it with a hard object.
Armrest can be adjusted
up and down with inset
buttons.
Right grip controls the back
tilt function.
Left grip controls the up
and down adjustment.
Adjustments are made via
convenient hand grips located
under the seat.
Adjustable tension knob for back tilt
customizes for different sized users

SEATING
2
No. Parts Qty.
A Backrest 1
B Armrest L/R 1 each
C Seat Cushion 1
D Seat Mechanism 1
E Gas Lift 1
F Base 1
G Castor 5
J Wrench 1
Item Specication Qty. Spare
A 1/4” x 1-1/4 6 1
B 1/4” x 1-1/4 4 1
Attention: Carefully check all parts according to the instructions
before assembling. Please assemble carefully to avoid scratching
surfaces, especially powder coated surfaces.
Parts

SEATING
3
Step 1:
Insert the Caster (G) into the hole at the bottom of the ve star base (F).
Step 2:
Insert the thick part of the gas lift (E) into the center hole of the ve
star base (F).
Step 3:
Attach the backrest (A) to seat cushion (C), then fasten the screw (B)
from underside.
Step 4:
Match the arm rest (B) with two sides of seat cushion (C), then fasten
with screw.
Step 5:
Put the seat cushion (C), which has been attached to backrest (A) on
the gas lift; then insert the cone-shaped hole of seat mechanism (D)
into the thin part of gas lift (E).
Step 6:
Ensure that all screws are fully tightened before using the chair.
Assembly Instructions

SEATING
4
1980 West Avenue 140th, San Leandro CA 94577/ TEL: 877.828.410 / http://www.friant.com
ALL
WOR KSTYLES
WELCOME
Product Dimensions
Aug 2019