Friant FBFPED.MOB User manual

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
TOOLS
STEP 1. Remove Box and File Drawers
Release the Snap Joints by pulling up on the left and pushing down
on the right. Pull box and file drawers out.
The following steps are instructions on how to
remove the Top Cap of a Box/File Mobile Pedestal
with lock, and replace it with a new top cap.
SNAP JOINT
snap joint

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
2.
Press tab in to release
suspension
Press tabs inward to pull
suspensions out.
2B
PRESS
STEP 2. Remove Suspensions on the right side
of the Pedestal
Using pliers, bend in tabs to release suspensions. (You do not need
to remove left side suspensions)
• The right side has (1) tab on the top, and (1) tab on the bottom
that need to be pressed inward. IMAGE 2A
• Using a plier; press tabs inward then, lift the front of the
suspensions up, pull forward to release. IMAGE 2B
Suspensions
Tab
(1) at top
(1) at bottom
2A

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
LOCK BAR
STEP 3. Remove Lock Bar STEP 4a. Remove Top Cap
Remove the (6) screws holding the top cap in place.
TOP CAP
SCREW

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
STEP 4b. Remove Top Cap continued
Using your fingers or a plier, squeeze clips and push
upwards. Remove top cap.
UNDERSIDE VIEW
OF TOP CAP
SQUEEZE THEN
PUSH UP THE CLIPS
STEP 5. Ready for new Top Cap
The mobile pedestal is now ready to have new top
cap installed.
2.

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
ALIGN ENDS
STEP 6a. Install new Top Cap
Align rear side of the new Top Cap with the top rear
end of the pedestal. Push top cap down till clips
click in place.
2.
2.

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
STEP 6b. Install new Top Cap continued STEP 7. Reinstall Lock Bar
Re-place (6) screws to hold the new top cap
in place.
Re-place Lock Bar back in it’s slot on the right side.
LOCK BAR

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
STEP 8. Reinstall Suspensions on the right side
of the Pedestal
2.
• Slide suspension into Tab A at back of the pedestal. Once in
place with Tab A, lower suspension on Tab B. IMAGE 8A
• Bend tabs (previously bent in Step 2) back out to hold
suspension in place. IMAGE 8B
Return suspensions
in place
sDETAIL VIEW OF THE
SUSPENSIONS IN THE
CORRECT POSITION
TAB A
BEND
TAB OUT
2.
2.
2.
8A
8B
TAB B

MY-HITE BOX / FILE
MOBILE PEDESTAL
WITH LOCK
Pedestal Top Cap
Installation Instructions Part Number: FBFPED.MOB
041017
Return box and file drawers in place. Align to the
suspensions and push in.
STEP 9. Reinstall Box and File Drawers STEP 10. Finished installation of the Pedestal with
the new Top Cap