Friant IGNITE User manual

1
User Guide and Assembly Instructions
IGNITE
Parts and Hardware
ABack (1 pc) DArmrest (1 pc) GCaster (5 pcs) JBolt (5/16” * 2 -1/2”) (6 pcs)
BSeat (1 pc) EGas Lift (1 pc) HAllen Key M5 (1 pc) KBolt (5/16” * 1 -1/2”) (4 pcs)
CSeating Mecanism (1 pc) FBase (1 pc) IBolt (5/16” * 3/4”) (3 pcs)

SEATING
2
Assembly Instructions
AF
G
E
B
D
C
I
H
(1 pc) (1 pc)
(5 pcs)
(1 pc)
(1 pc)
(1 set)
(1 pc)
(1 pc)
(3 pcs)
Step 1
Attach the Back [A] to the Seating
Mechanism [C] using (I) Bolt with Allen
Key [H]. Place aside.
Step 2
Attach the Armrest [D] to the Seat [B] using
Bolt [J] and tighten with Allen Key [H].
Step 4
Insert casters [G] into the base [F]. Push
hard until you feel or hear the casters [G]
snap into place.
Step 5
With the base [F] upright and the casters
[G] on the oor, insert the gas lift [E] into
the base [F]
Step 6
Attach the seating mechanism[C] onto the
gas lift [E].
J
H(1 pc)
(6 pcs)
Step 3
Attach seat [B] and seat mechanism [C]
by using Bolt [K] and tighten using Allen
Key [H].
H
K
(1 pc)
(4 pcs)

SEATING
3
User Guide
Ignite
Functions:
1. Use button on the outside of the armrest to adjust the height of the armrest.
2. Pull lever on the right side of the chair to adjust the height of the chair.
3. Pull out lever from right side of the chair and rotate to tighten or loosen the reclining tension.
4. Push lever on the back of the chair to adjust lumbar support.
5. Armrest can swivel inward, outward, forward, & backward.
6. Rotate knob on the left side clockwise by one click to lock seat from reclining. Rotate clockwise by one click again to lock into place.

SEATING
4
1980 West Avenue 140th, San Leandro CA 94577/ TEL: 877.828.410 / http://www.friant.com
ALL
WOR KSTYLES
WELCOME
Product Dimensions
130º
Oct 2019