Friant CELESSE User manual

CELESSE
SEATING MANUAL
4901 EAST 12th St / Oakland / California 94601 / T: 510.535.5113 / F: 510.535.5237 / friant.com
USER GUIDE
SIDE VIEW RATCHET-BACK
Back rest can be
adjusted by the
button on the
back rest.
Adjust the up & down of
the waist according to
your requirement
Up & down and
width adjustment
for armrest
Two buttons easily release the back
from its inward position
The left button under
the seat is for tilting
adjustment of the
mechanism, and the right
bottom button under
the seat is for height
adjustment of the chair.
Adjustment knob for
headrest angle

4901 EAST 12th St / Oakland / California 94601 / T: 510.535.5113 / F: 510.535.5237 / friant.com
CELESSE
SEATING MANUAL
ASSEMBLY GUIDE
NOTE: Carefully check all parts according to the instructions
before assembling. Please assemble carefully to avoid
scratching surfaces, especially powder-coated surfaces.
Item Parts Qty.
A Back Rest, overall seating 1
B Armrest L/R 1 ea
C Gas Lift 1
D Base 1
E Caster 5
F Knob for Width Adjustment 2
G Headrest 1
HScrew
3/16” x 12mm (hex socked M4) 2
J Hex Wrench (M4) 1
Parts & Hardware

4901 EAST 12th St / Oakland / California 94601 / T: 510.535.5113 / F: 510.535.5237 / friant.com
CELESSE
SEATING MANUAL
ASSEMBLY GUIDE
1. Assemble the Base & Casters
Insert the gavelock of the casters [E] into
the hole at the rear of the base [D].
4. Assemble the Back, Seat & Gas Cylinder
Insert the whole part which is assembled
with back and seat [A] into the smaller end
of the gas cylinder [C].
2. Assemble the Gas Lift & Gas Cylinder
Insert the bottom of the gas cylinder [C]
into the tapered hole of the base [D].
5. Assemble the Armrests & Knob
Insert the left and right armrests [B] into
the seat part and lock the width adjustment
knob [F].
3. Assemble the Headrest & Screw
Put headrest [G] into the backrest and seat
set. Tighten the screw [H] with the hex
socket wrench [J].
6. Assembly Complete

4901 EAST 12th St / Oakland / California 94601 / T: 510.535.5113 / F: 510.535.5237 / friant.com
CELESSE
SEATING MANUAL
PRODUCT DIMENSIONS