Fujitsu MB95200 Series User manual

Fujitsu Semiconductor (Shanghai) Co., Ltd.
Setup Guide MCU-AN-500059-E-12
F²MC-8FX FAMILY
8-BIT MICROCONTROLLER
MB95200 SERIES
EASY KIT
FMCDC-MB95260H-EK-01
SETUP GUIDE

Easy Kit FMCDC-MB95260H-EK-01 V1.2
0BContents
1. The products described in this manual and the specifications thereof may be changed without prior notice.
To obtain up-to-date information and/or specifications, contact your Fujitsu sales representative or Fujitsu
authorized dealer.
2. Fujitsu will not be liable for infringement of copyright, industrial property right, or other rights of a third party
caused by the use of information or drawings described in this manual.
3. The contents of this manual may not be transferred or copied without the express permission of Fujitsu.
4. The products contained in this document are not intended for use with equipment which require extremely
high reliability such as aerospace equipment, undersea repeaters, nuclear control systems or medical
equipment for life support.
5. Some of the products described in this manual may be strategic materials (or special technology) as defined
by the Foreign Exchange and Foreign Trade Control Law. In such cases, the products or portions theory
must not be exported without permission as defined under the law.
© 2009 Fujitsu Semiconductor (Shanghai) Co., Ltd.
MCU-AN-500059-E-12 – Page 2

Easy Kit FMCDC-MB95260H-EK-01 V1.2
0BContents
CONTENTS
REVISION HISTORY..................................................ERROR! BOOKMARK NOT DEFINED.
CONTENTS ............................................................................................................................ 2
1PRODUCT OVERVIEW ..................................................................................................... 4
1.1Objective and Deliverable......................................................................................... 4
1.2System Block ............................................................................................................ 4
1.3Handling Precautions................................................................................................ 4
1.4Feature...................................................................................................................... 5
1.5Hardware Setup........................................................................................................ 5
2EASY KIT MANUAL .......................................................................................................... 6
2.1Easy Kit Overview..................................................................................................... 6
2.2Function List.............................................................................................................. 6
2.3Easy Kit Interface Description................................................................................... 7
2.4Easy Kit USB Configuration...................................................................................... 8
2.5Easy Kit Mode Setting............................................................................................. 11
3EASY KIT SCHEMATIC .................................................................................................. 12
4SAMPLE CODE MANUAL .............................................................................................. 13
4.1Topic List................................................................................................................. 13
4.2Project Structure ..................................................................................................... 14
4.3Source Code File Description ................................................................................. 15
4.3.1Header Files.............................................................................................. 15
4.3.2Startup.asm File........................................................................................ 16
4.3.3Vectors.c File ............................................................................................ 17
4.3.4Main.c File................................................................................................. 17
5DEVELOPMENT PLATFORM QUICK START ............................................................... 18
5.1Tools Setup Sequence............................................................................................ 18
5.2Open Project and Start Debug................................................................................ 18
5.3Operation Precautions ............................................................................................ 18
6ADDITIONAL INFORMATION......................................................................................... 19
7APPENDIX....................................................................................................................... 20
MCU-AN-500059-E-12 – Page 3

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 1 1BProduct Overview
1 Product Overview
This product is an Easy Kit for MB95200 series. It is composed of an Easy BGMA and an
Easy EV-board. Combining the SOFTUNE Workbench on PC, the Easy Kit enables the
quick start of development before the user system is ready.
1.1 Objective and Deliverable
The Easy Kit provides users a simple development platform. Before using the Easy Kit,
make sure that the following devices are ready:
9Easy Kit (FMCDC-MB95260H-EK-01) 1PCS
9Quick Start Guide 1PCS
User could download SOFTUNE and MB95200 Sample Code from the following address,
http://www.fujitsu.com/cn/fss/services/mcu/tools.html
An USB extension cable (A-plug to A-jack) is optional if direct USB connection to PC is
inconvenient.
1.2 System Block
To setup a debugging system, connect PC and an Easy Kit together as shown below:
Figure 1-1: System Block
1.3 Handling Precautions
The Easy Kit can be used in connection with its bundled products. To ensure correct use of
this product in a proper environment, observe the following guideline:
Follow the instructions described in each manual for the bundled product to use this
product.
MCU-AN-500059-E-12 – Page 4

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 1 1BProduct Overview
1.4 Feature
The MB95200 Series Easy Kit is the best for a performance and functional evaluation, and a
check of operation before including MB95200 Series MCU in a user's system.
Below, the feature of the Easy Kit for MB95200 Series MCU is shown.
Microcomputer operation voltage. It corresponds to +2.7V to +5.5V.
(The maximum and minimum of microcomputer operation voltage and frequency of
operation differs with each MCU. refer to the documents (a data sheet, hardware manual,
etc.) of each device relation for the operation voltage and frequency of MCU of
operation.)
Compact development environment, a light and small Easy Kit.
Since a monitor program is performed in exclusive memory space, it does not consume
user memory space.
Continuation execution, step execution and break correspondence.
It connects with a host computer by the USB interface.
1.5 Hardware Setup
In the hardware setup procedure, you configure and connect the hardware products. This
chapter includes the configuring and connecting procedure for each product in order. Check
the contents and complete the hardware setup.
Configuration of each product
- Configuring Easy Kit
Connection of each product
- Connecting Easy Kit to PC
MCU-AN-500059-E-12 – Page 5

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
2 Easy Kit Manual
This chapter gives introduction how to setup Easy Kit.
2.1 Easy Kit Overview
Below is the close look of a MB95200 Series Easy Kit. The Part Number is
FMCDCMB95260H-EK-01. It provides a debug platform for the MB95200 Series MCU in a
small size (85mm (L) X30mm (W) X10mm (H)).
Mode switch
Easy BGMA Easy EV-board
2.2 Function List
ID Function description Remarks
1
Support MB95200 Series MCU MCU MAX machine clock: 16.25 MHz
MCU power voltage: 2.4*1*2 V ~ 5.5*1 V
2 Break pointer 256 software breakpoints
3 USB interface to PC/SOFTUNE Compatible to USB protocol version 1.1
4 1-Line UART interface to the
MB95200 Series MCU The Baud rate is 62,500 bps
5 Support the MCU flash programming
for engineering development
Flash operation at MCU rated voltage.
The program and read speed is about 800 B/S.
*1: The value varies depending on the operating frequency, the machine clock or the analog
guaranteed range.
*2: The value is 2.88 V when the low-voltage detection reset is used.
MCU-AN-500059-E-12 – Page 6

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
2.3 Easy Kit Interface Description
The Easy BGMA has five pins. Please check the table below for their definition. On board
debug function will be easily realized by connecting the following 5 pins to target system.
Pin Numbe
r
Pin Name Description
1 UVCC Target MCU Vcc
2 DBG Target MCU debug pin
3 GND Target MCU Vss
4 RST Target MCU reset input
5 5V Power supply to Easy EV-Board
All the 20 pins of the MCU on Easy EV-Board are directly connected to the Easy EV-Board
interface. Please check the table below.
Pin Number Pin Name Pin Number Pin Name
1 X0/PF0 20 12/EC0/DBG
2 X1/PF1 19 P07/INT07
3 Vss 18 P06/INT06/TO01
4 X1A/PG2 17 P05/INT05/AN05/TO00/HCLK2
5 X0A/PG1 16 P04/INT04/AN04/SIN/HCLK1/EC0
6 Vcc 15 P03/INT03/AN03/SOT
7 C 14 P02/INT02/AN02/SCK
8 RST/PF2 13 P01/AN01
9 TO10/P62 12 P00/AN00
10 TO11/P63 11 P64/EC1
MCU-AN-500059-E-12 – Page 7

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
2.4 Easy Kit USB Configuration
Connect the Easy Kit to a PC USB interface. If the connection is right, the following window
will pop up. Follow the instructions displayed, and then click Next.
Figure 2-1: Install Easy Kit in Windows (1)
Select Install from a list or specific location (Advanced), then click Next.
Figure 2-2: Install Easy Kit in Windows (2)
MCU-AN-500059-E-12 – Page 8

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
Select …\Drivers from the folder where SOFTUNE is installed, click Next.
Figure 2-3: Install Easy Kit in Windows (3)
Select BGMA (MB2146-08) as displayed below, and then click Next.
Figure 2-4: Install Easy Kit in Windows (4)
MCU-AN-500059-E-12 – Page 9

Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
If the following window pops up during installation, click Continue Anyway to complete the
installation.
Figure 2-5: Install Easy Kit in Windows (5)
Windows will install the driver automatically. Click Finish after the driver has completed the
installation normally. Then users can find the Easy Kit is recognized as “BGM Adaptor
(MB2146-08)” in Windows system.
Figure 2-6: Easy Kit is installed in Windows
MCU-AN-500059-E-12 – Page 10