GE SmartCom CC-SCRS01 User manual

g
SmartCom Room Station
Pocket Guide

Copyright Copyright © 2007 GE Security. All rights reserved.
This document may not be copied in whole or in part or other-
wise reproduced without prior written consent from GE Security
except where specifically permitted under US and international
copyright law.
Document number/revision: 1059040A (February 2007).
Disclaimer The information in this document is subject to change without
notice. GE Security (“GE”) assumes no responsibility for inaccu-
racies or omissions and specifically disclaims any liabilities,
losses, or risks, personal or otherwise, incurred as a conse-
quence, directly or indirectly, of the use or application of any of
the contents of this document. For the latest documentation,
contact your local supplier or visit us online at www.gesecu-
rity.com.
This publication may contain examples of screen captures and
reports used in daily operations. Examples may include ficti-
tious names of individuals and companies. Any similarity to
names and addresses of actual businesses or persons is entirely
coincidental.
Trademarks
and patents
GE and the GE monogram are registered trademarks of General
Electric Company.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
FCC compliance This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is oper-
ated in a residential environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
You are cautioned that any changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Software
license
agreement
Important: This end-user license agreement (“Agreement”) is a
legal agreement between GE and You. Read the following terms
and conditions carefully before installing or using this software.
This agreement provides a license from GE to use the software.
It also contains warranty information, disclaimers, and liability
limitations. Installing and/or using the software confirms Your
agreement to be bound by these terms and conditions. If You
do not agree with these terms and conditions, do not install or
use the software or, if already installed, immediately cease all
use of the software and promptly uninstall all components of the
software.

iii
1. Definitions. The following definitions apply to this docu-
ment:
a. “GE”, with respect to title to or warranty of the Soft-
ware, means GE Security Inc., a Delaware corpora-
tion.
b. “Software” means, the executable software or firm-
ware programs and accompanying documentation
installed on the GE products, plus any upgrades,
modified versions, updates, additions, and copies of
the software furnished to Customer during the term
of the license granted herein.
c. “Documentation” means all associated media,
printed materials, and electronic documentation
accompanying the Software.
d. “Licensed Product” means the Software and Docu-
mentation.
e. “Customer” means the person or organization, or
parent or subsidiary thereof, who uses the Software
for its intended purposes, and excludes distributors,
authorized resellers, value-added resellers and orig-
inal equipment manufacturers. Customer may be
referred to as You or Your, whether an individual or a
business entity of any kind.
f. “Machine” means the computer, workstation,
terminal, or other hardware product on which the
Software is installed.
2. License. All rights to and in the Licensed Product,
including, but not limited to, copyrights, patents, trade-
marks, and trade secrets, belong to GE, and GE retains title
to each copy of the Software. You agree that GE at any
time, upon reasonable notice, may audit Your use of the
Software for compliance with the terms and conditions of
this Agreement. Subject to the terms and conditions of this
Agreement, GE grants You a nonexclusive license to use
the Software, but only in the country where acquired,
provided that You agree to the following:
You may:
a. install and use the Software on a single Machine at one
time, unless You have purchased additional copies of the
Software, in which case You may install the software on
the number of Machines for which You have purchased
copies of the Software;
b. use the original copy of the Software provided to You for
backup purposes.

SmartCom Room Station
Pocket Guide
iv
You may not:
a. transfer or distribute the Licensed Product to others, in
electronic format or otherwise, and this Agreement shall
automatically terminate in the event of such a transfer or
distribution;
b. use the Software over a computer network;
c. sell, rent, lease, or sublicense the Software;
d. copy or modify the Licensed Product for any purpose,
including for backup purposes.
3. License. In this Agreement, you, the purchaser of the
rights granted by this Agreement, are referred to as You or
Your, whether an individual or a business entity of any kind.
Subject to the terms and conditions of this Agreement, GE
Security, Inc., a Delaware corporation, (“GE”) grants You a
nonexclusive license to use the accompanying software
(including any upgrades, modified versions, updates, addi-
tions and copies of the software furnished to You during the
term of the Agreement) (“Software”), and all associated
media, printed materials, and electronic documentation
accompanying the Software (“Documentation”), but only in
the country where acquired from your supplier and/or
authorized reseller (“Supplier”). In this Agreement, the Soft-
ware and Documentation are referred to as the Licensed
Product.
All rights to and in the Licensed Product, including, but not
limited to, copyrights, patents, trademarks, and trade secrets,
belong to GE, and GE retains title to each copy of the Software.
You may only install and use the Software on a single computer,
workstation, or terminal (“Computing Device”) at one time,
unless You have purchased additional copies of the Software, in
which case You may install the software on the number of
Computing Devices for which You have purchased copies of the
Software. You may not use the Software over a computer
network. You may not transfer or distribute the Licensed
Product to others, in electronic format or otherwise, and this
Agreement shall automatically terminate in the event of such a
transfer or distribution. You may not sell, rent, lease, or subli-
cense the Software. You may not copy or modify the Licensed
Product for any purpose, including for backup purposes.
You may use the original copy of the Software provided to You
for backup purposes. You agree that GE at any time, upon
reasonable notice, may audit Your use of the Software for
compliance with the terms and conditions of this Agreement.

v
4. Term. This Agreement is effective until terminated. You
may terminate this Agreement by uninstalling all compo-
nents of the Software from all Computing Devices and
returning the Licensed Product to GE. GE may terminate
this Agreement if You breach any of these terms and condi-
tions. Upon termination of this Agreement for any reason,
You agree to uninstall all components of the Software and
return the Licensed Product to GE. All provisions of this
Agreement relating to (i) disclaimer of warranties; (ii) limita-
tions on liability, remedies, and damages; and (iii) GE’s
proprietary rights, shall survive termination of this Agree-
ment.
5. Object code. The Software is delivered in object code
only. You may not alter, merge, modify, adapt, or translate
the Software, nor decompile, disassemble, reverse-engi-
neer, or otherwise reduce the Software to a human-perceiv-
able form, nor create derivative works or programs based
on the Software.
6. Limited warranty. GE warrants that for one (1) year from
the date of delivery of the Licensed Product (Software
Warranty Period), the functions contained in the Software
will be fit for their intended purpose as described in the
applicable Documentation from GE, and will conform in all
material respects to the specifications stated in such Docu-
mentation.
GE does not warrant that the operation of the Software will be
uninterrupted or error-free. GE does warrant that the media on
which the Software is furnished will be free from defects in
materials and workmanship under normal use for a period of
thirty (30) days from the date of delivery (Media Warranty
Period). Except as specifically provided therein, any other soft-
ware and any hardware furnished with or accompanying the
Software is not warranted by GE. Your exclusive remedy under
this limited warranty for nonconforming Software shall be repair
or replacement of the Software, in the sole discretion of GE. To
obtain a repair or replacement of nonconforming Software,
contact GE Customer Service toll free at 888-GESECURity or
online at www.gesecurity.com during the Software Warranty
Period. Your exclusive remedy under this limited warranty for
defective media is replacement of the defective media. To
receive replacement media under this limited warranty, return
the defective media to Supplier during the Media Warranty
Period, with proof of payment.
Except as expressly provided above, the licensed product is
provided “as is” without warranty of any kind, either expressed
or implied, including, but not limited to, implied warranties of
merchantability or fitness for a particular purpose and, except
as expressly provided above, you assume the entire risk as to
the quality and performance of the licensed product.

SmartCom Room Station
Pocket Guide
vi
7. Limitation of liability. GE’s sole obligation or liability
under this agreement is the repair or replacement of
nonconforming software and/or defective media according
to the limited warranty above. In no event will GE be liable
for any damages, whether consequential, incidental, or
indirect, nor for any loss of data, loss of profits, or lost
savings, arising out of use of or inability to use the software
or documentation (or any hardware furnished with the soft-
ware), even if GE has been advised of the possibility of such
damages, nor for any claim by any third party.
8. General. Any hardware provided to You by GE shall not
be exported or reexported in violation of any export provi-
sions of the United States or any other applicable jurisdic-
tion. Any attempt to sublicense, assign, or transfer any of
the rights, duties, or obligations hereunder shall be void.
This Agreement shall be governed by and interpreted under
the laws of the State of New York, United States of America,
without regard to conflicts of law provisions. You hereby
consent to the exclusive jurisdiction of the state and federal
courts located in Multnomah County, Oregon, to resolve
any disputes arising under or in connection with this Agree-
ment, with venue in Portland, Oregon.
9. Restricted rights legend. The Licensed Product is
provided with restricted rights. In the event the United
States Government or an agency thereof is granted a
license, the following additional terms apply: Restricted
Computer Software, as defined in the Commercial
Computer Software–Restricted Rights clause at Federal
Acquisition Regulations 52.227-19, and the restrictions as
provided in subparagraphs (c)(1) and (c)(2) thereof; and as
applicable, the Government’s rights to use, modify, repro-
duce, release, perform, display, or disclose the Software
also are restricted as provided by paragraphs (b)(2) and
(b)(3) of the Rights in Noncommercial Technical Data and
Computer Software–Small Business Innovative Research
(SBIR) Program clause at DFARS 252.227-7018.
You acknowledge that you have read and understand this
agreement and agree to be bound by its terms. You further
agree that this agreement is the complete and exclusive
statement of the agreement between you and GE, and
supersedes any proposal or prior agreement, oral or
written, and any other communication relating to the
subject matter of this agreement.
Intended use Use this product only for the purpose it was designed for; refer
to the data sheet and user documentation. For the latest
product information, contact your local supplier or visit us online
at www.gesecurity.com.

vii
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi
Conventions used in this document . . . . . . . . . . xii
Safety terms and symbols. . . . . . . . . . . . . . . . . . xiii
Chapter 1. Introduction . . . . . . . . . . . . . . . . . .1
Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SmartCom audio system . . . . . . . . . . . . . . . . . . . . .3
SmartCom intercom system. . . . . . . . . . . . . . . . . .3
SmartCom room station. . . . . . . . . . . . . . . . . . . . . . . 5
Selection knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Music control buttons . . . . . . . . . . . . . . . . . . . . . . . .7
Intercom control buttons. . . . . . . . . . . . . . . . . . . . .8
Advanced set up programming. . . . . . . . . . . . . 10
Chapter 2. Music controls . . . . . . . . . . . . . . .11
Music button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting a music source . . . . . . . . . . . . . . . . . . . 12
Setting music volume . . . . . . . . . . . . . . . . . . . . . . 13
Master mode special feature . . . . . . . . . . . . . . . 14
Menu button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Screen timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Backlight timeout . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Backlight level on . . . . . . . . . . . . . . . . . . . . . . . . . . 17

SmartCom Room Station
Pocket Guide
viii
Backlight level off . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LED level on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LED level off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Contrast level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Go back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Mute button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
On/off button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
All zones off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 3. Intercom controls . . . . . . . . . . . . 21
Intercom button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Selecting a station to call . . . . . . . . . . . . . . . . . . . 23
Making intercom calls . . . . . . . . . . . . . . . . . . . . . . 24
DND button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Calling room station DND alert. . . . . . . . . . . . . . 30
Listen button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Listen mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Monitor mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Door button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Chapter 4. Setup menu . . . . . . . . . . . . . . . . . 35
Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Room station address . . . . . . . . . . . . . . . . . . . . . . 37
Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Intercom settings . . . . . . . . . . . . . . . . . . . . . . . . . . 39

ix
Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Door enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
System information . . . . . . . . . . . . . . . . . . . . . . . . 45
Restore defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Chapter 5. Support. . . . . . . . . . . . . . . . . . . . . .47
Contacting technical support . . . . . . . . . . . . . . . 48
Online publication library. . . . . . . . . . . . . . . . . . . 49

SmartCom Room Station
Pocket Guide
x