Grandstream Networks DP715 User manual

Grandstream Networks, Inc.
DP715/DP710
DECT Cordless IP Phone

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 2 of 53
DP715/DP710 USER MANUAL
Index
GNU GPL INFORMATION .........................................................................5
CHANGE LOG ...........................................................................................6
CHANGES FROM 1.0.0.5 USER MANUAL...............................................................................................6
WELCOME.................................................................................................7
SAFETY COMPLIANCES ..........................................................................................................................7
WARRANTY...............................................................................................................................................7
CONNECT YOUR DP715/710....................................................................9
EQUIPMENT PACKAGING........................................................................................................................9
CONNECTING THE DP715 BASE STATION ............................................................................................9
CONNECTING THE DP710 CHARGER UNIT.........................................................................................11
SETTING UP THE DP715/710 HANDSET...............................................................................................11
PRODUCT OVERVIEW............................................................................12
SOFTWARE FEATURES OVERVIEW.....................................................................................................12
HARDWARE SPECIFICATIONS.............................................................................................................13
USING THE DP715/710 HANDSET .........................................................14
GETTING FAMILIAR WITHTHE HANDSET............................................................................................14
HANDSET KEYS DESCRIPTION............................................................................................................14
HANDSET DISPLAY STRUCTURE (LCD) ..............................................................................................16
BATTERY DISPLAY.................................................................................................................................16
HANDSET MENU STRUCTURE..............................................................................................................17
HANDSET MENU OVERVIEW ................................................................................................................18
HANDSET MENU DESCRIPTION...........................................................................................................19
BASIC OPERATIONS..............................................................................27
UNDERSTANDING DP715/710 VOICE PROMPT...................................................................................27
REGISTERING AHANDSET TO THE DP715 BASE STATION ..............................................................28
COMPLETING CALLS .............................................................................................................................29
ANSWERING CALLS...............................................................................................................................30
INTERNAL CALLS ...................................................................................................................................31
DIRECT IP CALLS....................................................................................................................................31
CALL HOLD..............................................................................................................................................32
CALL WAITING........................................................................................................................................32
CALL TRANSFER....................................................................................................................................32
3-WAY CONFERENCING........................................................................................................................33
CALL FEATURES....................................................................................34
DP715 BASE STATION - CONFIGURATION GUIDE..............................35
CONFIGURING THE BASE STATION THROUGH VOICE PROMPTS...................................................35
CONFIGURING THE BASE STATION VIAWEB BROWSER .................................................................35
IMPORTANT SETTINGS .........................................................................................................................36
ADVANCED USER CONFIGURATION ...................................................................................................39
SAVING THE CONFIGURATION CHANGES..........................................................................................47

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 3 of 53
REBOOTING THE DP715 BASE STATION FROM REMOTE.................................................................48
CONFIGURING THE DP715 BASE STATION THROUGH ACENTRAL SERVER.................................48
SOFTWARE UPGRADE ..........................................................................49
FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS.......................................................................49
INSTRUCTIONS FOR UPLOAD FROM LOCAL DIRECTORY................................................................50
INSTRUCTIONS FOR LOCAL FIRMWARE UPGRADE USING TFTP SERVER....................................50
CONFIGURATION FILE DOWNLOAD.....................................................................................................50
FIRMWARE AND CONFIGURATION FILE PREFIX AND POSTFIX......................................................50
MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD...................................................51
RESTORE FACTORY DEFAULT SETTING ............................................52
BASE STATION .......................................................................................................................................52
HANDSET................................................................................................................................................53

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 4 of 53
TABLE OF FIGURES
DP715/DP710 USER MANUAL
Figure 1: CONNECTING THE DP715 BASE STATION..................................................................9
Figure 2: CONNECTING THE DP710 CHARGER UNIT...............................................................11
Figure 3: INSERTING THE BATTERIES IN THE HANDSET........................................................11
Figure 4: HANDSET KEYS DESCRIPTION ..................................................................................14
Figure 5: HANDSET DISPLAY STRUCTURE...............................................................................16
Figure 6: HANDSET MENU STRUCTURE....................................................................................17
TABLE OF TABLES
DP715/DP710 USER MANUAL
Table 1: EQUIPMENT PACKAGING ...............................................................................................9
Table 2: DEFINITIONS OF THE DP715 CONNECTORS .............................................................10
Table 3: BASIC DEFINITIONS OF THE DP715 LEDS PATTERN................................................10
Table 4: ADVANCED DEFINITIONS OF THE DP715 LEDS PATTERN.......................................10
Table 5: DP715/DP710 TECHNICAL SPECIFICATIONS .............................................................12
Table 6: DP715/710 HARDWARE SPECIFICATIONS..................................................................13
Table 7: HANDSET KEYPAD ........................................................................................................14
Table 8: LCD ICONS......................................................................................................................16
Table 9: DP715/710 IVR MENU DEFINITIONS.............................................................................27
Table 10: DP715/710 CALL FEATURE DEFINITIONS .................................................................34
Table 11: BASIC SETTINGS .........................................................................................................37
Table 12: STATUS PAGE..............................................................................................................38
Table 13: ADVANCED SETTINGS................................................................................................39
Table 14: PROFILE SETTINGS.....................................................................................................42
Table 15: HANDSETS SETTINGS ................................................................................................47
CONFIGURATION GUI INTERFACE EXAMPLES
DP715/DP710 USER MANUAL
(http://www.grandstream.com/products/dp_series/dp71x/documents/dp715_gui.zip)
1. SCREENSHOT OF ADVANCED USER CONFIGURATION PAGE
2. SCREENSHOT OF BASIC SETTINGS CONFIGURATION PAGE
3. SCREENSHOT OF HANDSETS CONFIGURATION
4. SCREENSHOT OF PROFILE CONFIGURATION
5. SCREENSHOT OF STATUS PAGE
6. SCREENSHOT OF LOGIN PAGE
7. SCREENSHOT OF REBOOT PAGE
8. SCREENSHOT OF REBOOTING PAGE

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 5 of 53
GNU GPL INFORMATION
The DP715/710 firmware contains third-party software licensed under the GNU General Public License
(GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General
Public License (GPL) for the exact terms and conditions of the license.
Grandstream GNU GPL related source code can be downloaded from Grandstream web site from:
http://www.grandstream.com/support/faq/gnu_gpl .

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 6 of 53
CHANGE LOG
This section documents significant changes from previous versions of DP71x user manuals. Only major
new features or major document updates are listed here. Minor updates for corrections or editing are not
documented here.
CHANGES FROM 1.0.0.5 USER MANUAL
Added option [Update Handset Time] under Advanced Setting.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 7 of 53
WELCOME
Thank you for purchasing Grandstream’s DP715/710 DECT Cordless IP Phone. The DP715/710 is the
next generation of powerful, affordable, high quality and simple to configure DECT Cordless IP Phone for
small business and residential users. Their compact size, superb voice quality, rich feature set, market
leading price-performance and wide range radio coverage enable consumers to maximize the power of IP
voice application and mobility for a minimum investment. The DP715/710 is SIP and DECT compliant and
field proven for flexible deployment.
This manual will help you learn how to operate and manage your DECT Cordless IP Phone DP715/710
and make the best use of its many upgraded features including simple and quick installation, 3-way
conferencing, direct IP Calling, and new provisioning support among other features. The DP715/710 is
very easy to manage and configure, and is specifically designed to be an easy to use and affordable VoIP
solution for both residential user and teleworker.
SAFETY COMPLIANCES
The DP715/710 complies with FCC/CE and various safety standards. The DP715/710 power adaptor is
compliant with UL and GS standards. Only use the universal power adapter provided with the DP715/710
package. The manufacturer’s warranty does not cover damages to the phone caused by unsupported
power adaptors.
WARRANTY
If you purchased your DP715/710 from a reseller, please contact the company where you purchased your
device for replacement, repair or refund. If you purchased the product directly from Grandstream, contact
your Grandstream Sales and Service Representative for an RMA (Return Materials Authorization) number
before you return the product. Grandstream reserves the right to remedy warranty policy without prior
notification.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 8 of 53
Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation
of this product in any way other than as detailed by this User Manual, could void your manufacturer
warranty. Please do not use a different power adaptor with the DP715 as it may cause damage to the
products and void the manufacturer warranty.
This document contains links to DP715 GUI Interfaces. Please download these examples for
your reference here:
http://www.grandstream.com/products/dp_series/dp71x/documents/dp715_gui.zip
This document is subject to change without notice. The latest electronic version of this user
manual is available for download at:
http://www.grandstream.com/products/dp_series/dp71x/documents/dp71x_usermanual_english.pdf
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose is not permitted without the express written permission of Grandstream Networks, Inc.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 9 of 53
CONNECT YOUR DP715/710
EQUIPMENT PACKAGING
Table 1: EQUIPMENT PACKAGING
DP715
DP710
1 Base unit
1 Handset including 2 rechargeable
batteries (AAA, 1.2V / 500 mAh, NiMH)
1 power supply plug for the base unit
1 Ethernet cable
1 User guide
1 GPL License
1 Handset including 2 rechargeable
batteries (AAA, 1.2V / 500 mAh, NiMH)
1 Charger unit
CONNECTING THE DP715 BASE STATION
To setup the DP715 Base Station, follow the steps below:
1. Connect the Network port of the DP715 to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable provided.
2. Connect the 6V DC output plug to the power jack on the DP715; plug the power adapter into an
electrical outlet.
Figure 1: CONNECTING THE DP715 BASE STATION
Note: When the base station boots up, it will automatically call all the registered handsets to update the
date and time.
DP715 Front View
DP715 Back View
RJ-45 Ports
10/100 Mbps
Power Supply
(DC 6V)
Reset
Power
Network
Registered
Call

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 10 of 53
Table 2: DEFINITIONS OF THE DP715 CONNECTORS
DC 6V
Power adapter connection.
NETWORK PORT
(RJ-45)
10/100Mbps RJ-45 port to connect to the network.
RESET
Factory Reset button: Press for 7 seconds to reset factory default settings.
Table 3: BASIC DEFINITIONS OF THE DP715 LEDS PATTERN
LEDs
POWER LED
Indicates Power. Remains green when power is connected, and orange when handset is
connected for charging.
NETWORK
Indicates Access to the Network. Remains ON while there is Access to the Network
REGISTERED
Indicates if the SIP accounts are registered
CALL
Indicates status of active calls.
Table 4: ADVANCED DEFINITIONS OF THE DP715 LEDS PATTERN
Pattern
Number
Condition
LED
LED Behavior
LED-01
Device has normal power
POWER
GREEN ON
LED-02
Handset is placed on base with battery to charge
POWER
ORANGE ON
LED-03
Power Error: Power is removed from the device or power
supply with improper voltage is plugged in
POWER
OFF
LED-04
Device has normal LAN connection and has obtained an
IP address
NETWORK
ON
LED-05
Link Down
Note : This is the default state while the device is booting.
NETWORK
Blink (1s on/ 1s off).
LED-06
Link Up but no IP Address
NETWORK
Blink ( 0.25s on/ 0.25s
off )
LED-07
All configured SIP accounts are registered
REGISTERED
ON
LED-08
SIP accounts are in the process of registering
REGISTERED
Blink ( 1s on/ 1s off )
LED-09
Device is booting, application has not started.
REGISTERED
OFF
LED-10
No account is configured on DP715
REGISTERED
OFF
LED-11
Registration Error - ANY SIP account experiences
registration failure.
REGISTERED
Blink ( 0.25s on/ 0.25s
off )
LED-12
Call is active. Any DECT handset is in an active call with
an external line.
CALL
ON
LED-13
No active call.
CALL
OFF

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 11 of 53
CONNECTING THE DP710 CHARGER UNIT
To setup the DP710, follow the steps below:
Plug the 7V DC power adapter into an electrical outlet to start using the charger unit.
Figure 2: CONNECTING THE DP710 CHARGER UNIT
SETTING UP THE DP715/710 HANDSET
To setup the handset, follow the steps below:
1. Open the battery compartment (see below).
2. Insert the batteries in the correct polarity (+ and -).
3. Close the battery compartment.
4. To charge the rechargeable batteries for the first time, place the handset in the base unit or
charger unit for 16 hours.
Figure 3: INSERTING THE BATTERIES IN THE HANDSET
2
1
1
2
3
1. Battery compartment cover
2. Batteries
3. Rear of Handset
1 Underside of the charger unit
2 Power supply plug

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 12 of 53
PRODUCT OVERVIEW
The DP715/710 is the next generation of powerful, affordable, high quality and simple to configure DECT
Cordless IP Phone for small business and residential users. Their compact size, superb voice quality, rich
feature set, market leading price-performance and wide range radio coverage enable consumers to
maximize the power of IP voice application and mobility for a minimum investment. The VoIP network
signaling protocol supported is SIP. The DP715/710 is fully compatible with SIP industry standard and can
interoperate with many other SIP compliant devices and software on the market. Moreover, it supports
comprehensive voice codecs including G.711, G.723.1, G.729AB, G.726 and iLBC.
SOFTWARE FEATURES OVERVIEW
Table 5: DP715/DP710 TECHNICAL SPECIFICATIONS
Air Interfaces
Telephony standards: DECT / GAP
Frequency range: 1880 - 1900 MHz (Europe), 1920 - 1930 MHz (US)
Number of channels: 120 (Europe), 60 duplex (US)
Modulation: GFSK
Speech coding: 32 kbit/s
Emission power: 10 mW (average power per channel)
Range: up to 300 m outdoors, maximum of 50 m in buildings
Network Interface
One 10/100Mbps auto-sensing Ethernet port (RJ45) ( DP715 Base Station only)
LED Indicators
Base Station : Power, Network, Register, Call
Handset Display
1.7” 102x80 FSTN LCD with color backlight
Factory Reset Button
Yes ( DP715 Base Station only)
Audio Interface
Handsfree speaker (Handset only)
Voice over Packet
Capabilities
Base Station : Dynamic Jitter Buffer
Handset : Speakerphone with Acoustic Echo Cancellation
Voice Compression
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.726-32 AAL2,
G.729A/B, iLBC
Telephony Features
Caller ID display or block, call waiting, Flash, blind or attended transfer, forward, hold, do
not disturb, 3-way conference
QoS
Layer 2 (802.1Q VLAN/802.1p), Layer 3 (ToS, DiffServ, MPLS)
IP Transport
RTP/RTCP
DTMF Method
In-audio, RFC2833 and/or SIP Info
IP Signaling
SIP (RFC 3261)
Multiple SIP accounts
per base station
Up to five (5) distinct SIP accounts per system; Independent SIP account per handset;
Multiple handsets per SIP account
Hunting Group
Linear mode; Parallel mode; Shared Line mode
Provisioning
HTTP, HTTPS, TELNET, TFTP, TR-069 (pending), secure and automated provisioning
Security
Security protection: SIP over TLS and SRTP.
Device Management
Web interface or secure (AES encrypted) central configuration file for mass deployment
Support device configuration via built-in IVR, Web browser or central configuration file
through TFTP, HTTP or HTTPS
Auto/manual provisioning system
NAT-friendly remote software upgrade for deployed devices including behind
firewall/NAT
Syslog support

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 13 of 53
Phonebook
(Per Handset)
200 numbers (up to 24 digits) with an associated name (up to 16 characters);
10 outgoing call entries;
30 incoming calls entries
Multi-language
Base Station Web UI: English;
Voice Prompt : English, Spanish;
Handset LCD Menu (15): English, French, German, Spanish, Dutch, Italian, Czech,
Danish, Greek, Norwegian, Polish, Portuguese, Russian, Swedish, Turkish.
Multi-language Input
English; Latin; Greek; Russian
Polyphonic Ringtones
18 different ringer melodies are available to indicate an incoming call (internal intercom
or external VoIP)
HARDWARE SPECIFICATIONS
The table below lists the hardware specifications of the DP715/710.
Table 6: DP715/710 HARDWARE SPECIFICATIONS
Universal Power Supply
Input: 100–240 VAC, 50-60 Hz, 0.15A;
Output: 6VDC, 500mA (for Base Station)
Output: 7VDC, 420mA (for Charger Unit)
Power Consumption
Base unit with handset: approximately 1.2W
Battery Life
10 hours talk time; 80 hours standby time
Dimension (H x W x D)
Base Station: 75 x 105 x 85mm;
Handset: 160 x 46 x 22 mm;
Charger unit: 53 x 75 x 60 mm;
Weight
Base Station: Approximately 0.21lbs (95g);
Handset (with batteries): Approximately 0.23lbs (104g);
Charger Unit: Approximately 0.22lbs (102g)
Temperature
Operational: 32° ~ 104°F or 0° ~ 40°C
Storage: -4° ~ 140°F or -20° ~ 60°C
Humidity
Maximum 85% (non-condensing)
EMC & Safety
FCC : Part 15B/15D,
CE : ETSI EN 301 489-1 V1.8.1, ETSI EN 301 489-6 V1.3.1, ETSI EN 301 406-1 V2.1.1,
EN60950-1, EN50360 and EN50385
CENELEC EN 60950-1:2006 / All:2009
Efficient use of
Frequency Spectrum
ETSI EN 301 406 V1.5.1

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 14 of 53
USING THE DP715/710 HANDSET
GETTING FAMILIAR WITH THE HANDSET
The DP715/710 Handset has a dynamic screen. The screen displays differently depending on whether the
handset is idle or in use (active screen).
HANDSET KEYS DESCRIPTION
1. Display
2. Right display button (display functions)
3. Up/Redial key
4. Right/Recall key
5. On-hook/Power key
6. Alphanumeric keypad
7. Keypad lock key
8. Microphone
9. Ringer off-key
10. Down/Calls list key
11. Off-hook key/Handsfree key
12. Left/Internal call key
13. Left display button (display functions)
Figure 4: HANDSET KEYS DESCRIPTION
Table 7: HANDSET KEYPAD
Key
Definition
2 Display function/soft keys that correspond to the functions displayed on the LCD.
The soft keys function changes depending on the current context. Their current
function is shown directly above in the display. The most important display key
functions are:
- Off-hook key : Answer calls
- Hands free key
Phone book
OK/ Confirm
Menu
Delete
Mute function
Previous
Cancel

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 15 of 53
- Power Key : Turn on / Off the handset
- On-hook: Terminate calls.
- Redial List : Display your 10 last Outgoing calls
- Up Navigation key
- Increase the volume during the call.
- Recall-Key/hook-flash key used to place call on hold toggle between calls.
- Call List : Display your 30 last Incoming calls/Missed calls
- Down Navigation key
- Decrease the volume during the call.
- Internal Call key : Allows you to make an internal call to any Handset
registered to the same DP715 Base Station
Standard telephone keypad. The # key can act as a send key.
In the input mode, if an English alphabet needs to be entered, press the
corresponding numerical key multiple times. To switch between upper/lower case
input press the * Key.
For example, if the user wishes to enter b, press 2 three times; if the user wishes to
enter y, press 9 four times.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 16 of 53
HANDSET DISPLAY STRUCTURE (LCD)
Figure 5: HANDSET DISPLAY STRUCTURE
BATTERY DISPLAY
• The batteries are fully charged.
• The batteries are 75% charged.
• The batteries are half charged (50%).
• The batteries are only 25% charged.
• The batteries are almost flat. The battery icon in the display flashes and the “Battery Low!”
message appears.
Table 8: LCD ICONS
Icon
LCD Icon Definitions
On Hook.
Off Hook.
Ringing.
Handsfree Speaker ON.
Missed Calls Notification.
ABC
Upper Case.
abc
Lower Case.
Navigate Through Menu Items.
Handset Ringer Off.
Alarm Set.
Icon Line
Text Line
Display Menu/Options Menu

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 17 of 53
Keypad Locked: ON when the keypad is locked.
Range Icon :
Solid when it’s within the base unit coverage range.
Flashing when it’s out of the base unit coverage range (The handset will display
“Searching”).
HANDSET MENU STRUCTURE
The handset has an easy-to-use menu structure. Every menu opens a list of options.
To open the main menu, press the right display key when the handset is ON and in standby
mode .
Press the key or key to scroll to the menu option you require. Then press to
select further options or confirm the setting displayed.
Note: The instructions in this user guide show the key symbols and the item number on the device
overview.
Figure 6: HANDSET MENU STRUCTURE
To go to the previous menu item, press .
You can press the key at any time to cancel and return to standby mode. If you do not press any
key, the handset automatically reverts to standby mode after 20 seconds.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 18 of 53
HANDSET MENU OVERVIEW
Display
Definition
Phonebook
Displays the contact entries
Handset
Ring Tone
Internal: Allows you to specify the ring tone for internal calls.
External: Allows you to specify the ring tone for external
calls.
Note: The Handset support up to 18 different ring tones.
Ringer Volume
Allows you to set the ringer volume level.
Handset Name
Specifies the Handset Name.
Keypad Beep
On: Turn on the keypad beep.
Off: Turn off the keypad beep.
Contrast
Allows you to configure the Contrast level, up to 8 level.
Auto Talk
On: When set to ON, the call will be automatically answered
if you pick up the handset from the Charger Unit/Base
Station.
Off: When set to OFF, the calls will be only answered by the
off-hook key.
Select Base
Auto: When you have multiple registered bases saved on
your handset, Auto will enable the handset to automatically
choose the base according to signal strength.
Manual: Select the base you want to register to.
Language
Allows you to choose the language.
Registration
Register: Set the Handset in registration mode
De-Register: De-Register the Handset from the base
Time
Set Alarm
Once: Alarm will be only triggered one time.
Every Day: Same Alarm will be triggered everyday at the
same time.
Mon to Fri: Same Alarm will be triggered from Monday to
Friday
Off: Turn Off the Alarm.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 19 of 53
Set Time Format
12Hour: Time will be displayed in 12 Hours format i.e.
3:00pm
24Hour: Time will be displayed in 24 Hours format i.e. 15:53
Tools
Appointement: Allows you to set up reminders.
Stop Watch: Allows you to measure a time interval.
HANDSET MENU DESCRIPTION
TURNING THE HANDSET ON/OFF
1. Press the power-key to turn the handset on.
2. To switch the handset off, press and hold the power-key until the handset switches off.
CALL HISTORY
When you receive a call, the phone number of the caller, the date and time appear in the handset display.
The name will be also shown if it’s present in the phonebook or in the SIP Invite.
The calls received are stored in a calls list (maximum of 30 call entries are saved). When the memory is full,
the new calls automatically replace the oldest ones in the log. The upper icon in the display flashes if
there are new missed calls in the calls list, and the number of new calls is shown in the middle of the
display next to the icon. If the calls list is empty and you press , Calls List Empty appears.
Consult the Call History
1. Press to retrieve the most recent entry.
2. The phone number of the most recent caller appears. If the caller's name is entered in the phonebook,
the name will be shown in the first line. If there is no entry and the calling number is not transmitted
Withheld is shown.
The date and time for each calls is shown in the second and third line.
The following information is also displayed in the third or fourth line:
–New: Unread or unanswered call.
–Old: Read or answered call.
–Repeat: Multiple calls of the same number. Only the last call is shown.
3. Press to display further entries in the list.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 20 of 53
Deleting a Call
1. Press to access the calls list.
2. Use or to search for the number you need.
3. Press Option Softkey.
4. Press or repeatedly, select Delete.
5. Press to confirm.
6. The call is deleted and the next call appears on the display.
Delete all Calls
1. Press to access the calls list.
3. Press Option Softkey.
4. Press or repeatedly, select Delete All.
5. Press to confirm.
Note:Only the old calls are deleted. New calls, i.e. calls that have not been read or answered, are retained.
THE PHONEBOOK
You can store 200 numbers (up to 24 digits long) with an associated name (up to 16 characters long) in the
phonebook.
Saving a New Entry in the Phonebook
1. Press .
2. Press Option and confirm the New Entry with to add a new entry.
• Name: appears in the display.
3. Enter the name using the alphanumeric keys.
4. Press Save and enter the phone number.
5. Press Save and select the ringer melody required.
6. Press Save, to save the entry to the phonebook or press to cancel without saving the entry.
Edit a Phonebook Entry
1. Press .
2. Enter the initial letter of the name using the alphanumeric keys.
3. The first name in the list with this letter appears in the display.
4. Press or repeatedly to scroll through the other numbers in the phonebook.