Grandstream Networks GXV 3140 Manual

Grandstream GXV
Admin Guide
Schmooze Com Inc.
GXV 3140 & 3175
GRANDSTREAM
GXV3175
Schmooze Com Inc.
HD

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu”.
2. Select “System Info”.
© Copyright Schmooze Com, 2012
3. Select the “Network” Tab.
4. You will now be shown the current IP address and MAC address of the phone.
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
Reset to Factory Defaults
Quick Steps
1.Select “Menu”.
2.Select “System Settings”.
3.Select “Maintenance”.
Schmooze Com Inc.
4.Navigate to “Reboot” tab.
5.Select “Factory Reset” option. The phone will reboot and perform a factory reset.

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu”.
2. Select “System Info”.
3. Select the “Network” Tab.
4. You will now be shown the current IP address and MAC address of the phone.
© Copyright Schmooze Com, 2012
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
Reset to Factory Defaults
Quick Steps
1.Select “Menu”.
2.Select “System Settings”.
3.Select “Maintenance”.
4.Navigate to “Reboot” tab.
5.Select “Factory Reset” option. The phone will reboot and perform a factory reset.

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu”.
2. Select “System Info”.
3. Select the “Network” Tab.
4. You will now be shown the current IP address and MAC address of the phone.
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
© Copyright Schmooze Com, 2012
Grandstream Device Conguration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2006-2011
Grandstream Device Conguration
All Rights Reserved Grandstream Networks, Inc. 2006-2011
STATUS BASIC SETTINGS ADVANCED SETTINGS PROFILE 1 PROFILE 2 FXS PORTS
MAC Address: WAN-- 00:00:00:00:00:00 LAN-- 00:00:00:00:00:00 ( Device MAC)
WAN IP Address: 10.10.0.241
Product Model: HT-502 V1.2A
Software Version: Program -- 1.0.7.6 Bootloader -- 1.0.0.15 Core -- 1.0.7.1 Base -- 1.0.7.6
CPE -- 1.0.1.19
System Up Time: 09:06:40 up 7 days
PPPoE Link Up: Disabled
NAT:
Port Status: Port Hook Registration DND Forward Busy Forward Delayed Forward
FXS 1 On Hook Registered No
FXS 2 On Hook Registered No
Grandstream Device Conguration
STATUS BASIC SETTINGS ADVANCED SETTINGS PROFILE 1 PROFILE 2 FXS PORTS
Admin Password: (purposely not displayed for security protection)
Layer 3 QoS:
12
(Diff-Serv or Precedence value)
Layer 2 QoS: 802.1Q/VLAN Tag
0
802.1p priority value
0
(0-7)
802.1p priority value (NATed traffic)
0
(0-7)
STUN server is : (URI or IP:port)
Keep-alive Interval:
20
(in seconds, default 20 seconds)
Use STUN to detect network connectivity:
No
Yes, total STUN response misses
3
to restart DHCP (mininum=3)
Firmware Upgrade and Provisioning: Upgrade Via TFTP HTTP HTTPS
Firmware Server Path:
10.10.0.1/grandstream/2
Config Server Path:
10.10.0.1/
Reset to Factory Defaults
Quick Steps
1.Select “Menu”.
2.Select “System Settings”.
3.Select “Maintenance”.
4.Navigate to “Reboot” tab.
5.Select “Factory Reset” option. The phone will reboot and perform a factory reset.

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu”.
2. Select “System Info”.
3. Select the “Network” Tab.
4. You will now be shown the current IP address and MAC address of the phone.
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
Reset to Factory Defaults
Quick Steps
1.Select “Menu”.
2.Select “System Settings”.
3.Select “Maintenance”.
© Copyright Schmooze Com, 2012
Schmooze Com Inc.
4.Navigate to “Reboot” tab.
5.Select “Factory Reset” option. The phone will reboot and perform a factory reset.

Chapters
Find the IP Address and MAC Address
Set the Configuration Server
Reset to Factory Defaults
Find the IP Address and MAC Address
Quick Steps
1. Select the “Menu”.
2. Select “System Info”.
3. Select the “Network” Tab.
4. You will now be shown the current IP address and MAC address of the phone.
Set the Configuration Server
Quick Steps
1. Find the IP address of the phone and open a web browser to the IP address.
2. Login with the phone admin password. Default factory password is admin
3. Click on the “Advanced Settings” option at the top.
4. Define the Config server path to your PBX. Generally this would be the IP address such as
10.10.0.1, used in our example. Press the “Save” button at the bottom.
Reset to Factory Defaults
Quick Steps
1.Select “Menu”.
2.Select “System Settings”.
3.Select “Maintenance”.
4.Navigate to “Reboot” tab.
5.Select “Factory Reset” option. The phone will reboot and perform a factory reset.
© Copyright Schmooze Com, 2012

Schmooze Com Inc.
http://schmoozecom.com
[phone]