Great Little Trading Art Easel L4702 User manual

1
Art Easel
L4702
23/03/2021
V3
easy - medium - hard
Assembly Difculty
one-person job
www.gltc.co.uk
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Please read these instructions carefully before assembly.
• Adult required for assembly, to fold, unfold and to load or change the
paper reel.
• Unassembled product contains small parts which may present a
choking hazard.
• Not suitable for children under 3 years due to small parts that may
become detached and present a choking hazard.
• Children should be kept away from the product during assembly to avoid
any possible risk of injury.
• Assemble and use on a at and level surface.
• To avoid possible injury, DO NOT allow children to climb/stand on the
product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check item regularly for signs of damage which may make the product
unsafe.
• Check all xtures and ttings regularly and tighten as necessary.
• Complies to the European Toy Safety Directive.
• DO NOT use this item if any components are missing or damaged.
• Please ensure the wooden peg is securely in place before allowing children
to use the easel.
• Remove all packaging before giving to your child.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
Registered Address:
GLTC Ltd, 12 Buckhold Road,
Wandsworth, London, SW18 4GP, United Kingdom
Authorised Representative:Authorised
Representative Service, 77 Camden Street Lower,
Dublin, D02 XE80, Ireland

3
Component Check List
A B
1x 2x
STEP 1:
Attach 2x brackets (B) to frame (A) using 4x screws (#1).
Using Philips head screwdriver.
1x 2x
1x 1x
4x screws
32mmL
2x bolts
38mmL
C D
E F
#1 #2
A
B
B
#1 x2
#1 x2
Hardware for Step 1:
4x #1 32mmL screw
Phillips Head Screwdriver
You will need (not supplied)
1x Allen Key
#3

4
C
#2 x2
D x2
STEP 2:
Attach ledge panel (C) to back of frame (A) using 2x bolts (#2). Using allen key.
Secure the front of ledge panel (C) to the front of frame (A) using 2x pegs (D).
Hardware for Step 2:
2x #2 38mmL bolts
STEP 3:
Insert rod (E) into the bracket (B). Push it all the way through so it goes all the
way through the other bracket.
Secure the rod using end cap (F).
F
E
C
A
A
C
B
B
Copyright© 2019 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
With the rod secured, the assembly is now complete.
1x Allen key