Great Little Trading L5260 User manual

1
Desk Organiser
27/10/2021
V1
one-person job
Assembly Difculty
easy - medium - hard
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
L5260

2
Safety Warnings:
• Adult assembly required.
• WARNING! Not suitable for children under 3 years due to small parts
which may become detached and present a choking hazard.
• Assembly to be carried out by a competent adult only. During assembly
children should be kept away from the product due to possible risk of
injury.
• DO NOT use this item if any components are missing or damaged.
• In an unassembled state product contains small parts which may pose a
choking hazard, not suitable for children under 3 years.
• DO NOT use power tools in the assembly of this product as there is
risk of over-tightening and consequently splitting of the wood.
• Use on a at surface only.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE..
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
are properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E F
G
#1 #2
#3
12x Wooden Dowels
25mmL
42x Wooden Dowels
20mmL
x1
Component Check List
Hardware Check List
12x Screws
25mmL
H
IJ
K L
MN
O
Component Check List
x2 x2
x2
x2
x1 x1
x2 x1
x1 x1
x1 x1
x1 x1

4
Hardware for Step 1:
Hardware for Step 3:
6X #2 Wooden Dowels 20mmL
C
#2
#2
#2
#2
#2
#2
F D
D
#2
C#2
D
D
C
E
#2
F
#2
STEP 1:
Attach panels F, D & D to
panel C using 6x wooden
dowels (#2).
STEP 2:
Attach panels F, D &
D to panel C using 6x
wooden dowels (#2).
STEP 3:
Attach panel E to panel D
using 2x wooden dowels
(#2).
2X #2 Wooden Dowels 20mmL
C
#2
#2
#2
#2
#2
#2
FD
D
C
#2
Hardware for Step 2:
6X #2 Wooden Dowels 20mmL

5
Hardware for Step 5:
#3
#3
#3
#1
#1
A
C
#2
#2
#1
#1 #2
#1
C
#2
#2
E
D
D
C
A
#2
C
STEP 4:
Attach panel E to panels C, C and
E using 2x wooden dowels (#2)
and 4x wooden dowels (#1).
Secure using 2x screws (#3).
STEP 5:
Attach panel E to panel D using
2x wooden dowels (#2).
STEP 6:
Attach panels G, G and H to panel I
using 2x wooden dowels (#1) and 2x
wooden dowels (#2).
Secure using 2x screws (#3).
*GLTC Tip
Please ensure
screws securing
panels B to G is
completely ush
with the panel,
otherwise it
will scratch the
drawer.
4x #1 Wooden Dowels 25mmL
Hardware for Step 4:
2x #2 Wooden dowels 20mmL
2x #3 Screws 25mmL
4x #1 Wooden Dowels 25mmL
Hardware for Step 6:
4x #2 Wooden dowels 20mmL
4x #3 Screws 25mmL
2x #2 Wooden Dowels 20mmL
#3
#3
#3
#3
#3
#2
#2
#1
#1
I
G
G
H
I
#1
#2
E
B
Now attach panels G, G and H to
panel B using 2x wooden dowels (#1)
and 2x wooden dowels (#2).
Secure using 2x screws (#3).
G
H
G

6
#1
#2
C
C
E
B
#2
#2
#1
#1
#1
#1
#3
#3
#3
J
K
M
L
K
J
N
#2
#2
#2
#2
#2
#2
#2
Hardware for Step 9:
STEP 7:
Attach panel B to panels C, C and
E using 4x wooden dowels (#1)
and 2x wooden dowels (#2).
Secure using 2x screws (#3).
STEP 8:
Slot the cut out on panel J into the cut
out on panel K.
STEP 9:
Attach panels M and N to base and
divider panels L and K using 6x
wooden dowels (#2).
4x #1 Wooden Dowels 25mmL
Hardware for Step 7:
2x #2 Wooden dowels 20mmL
2x #3 Screws 25mmL
6x #2 Wooden dowels 20mmL

7
Hardware for Step 10: Your product is now ready to use
Copyright© 2022 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
#2
#2 #2
#2
#2
#2
#3
#3
#3
M
N
J
O
#2
O
J
N
O
M
#2
#2 #2
#2
#2
#2
#3
#3
#3
STEP 10:
Attach panel O to base (L)
and divider panel (J) using 6x
wooden dowels (#2).
Secure using 2x screws (#3).
STEP 11:
Repeat with the other panel O.
12x #2 Wooden dowels 20mmL
4x #3 Screws 25mmL
L