Great Little Trading Junior Whittington L2424 User manual

1
Junior Whittington Chair
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
L2424
28/11/2016
V3
easy - medium - hard
Assembly Difculty
one-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• This product is suitable for children in the age range of 3 to 6 years.
• Maximum weight load 30Kg. Do not overload.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• DO NOT use this item if any components are missing or damaged
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• The painted/lacquered surface is resistant to staining if cleaned
immediately, however please protect the surface from contact with
ball point pen and indelible style felt markers as the ink is by nature
permanent.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
STEP 1:
Position the seat B against the back panel A.
A
B
A B
#1
#3
C
#2
1x Seat
Pair of Legs
6x Bolts
45mmL
1x Back Panel
2x Bolts
30mmL
8x Washers
Phillips Head Screwdriver
You will need (not supplied)
#4
8x Split Washers

4
STEP 2:
Screw 2x of the shorter 30mm bolts (#1) into the two inner drill holes using the
washers (#3) and split washers (#4) (as shown).
Please note: It is recommended that you do not completely tighten the screws when
applying them individually.Wait until all hardware is in place in the stages to follow and
semi-tightened, before tightening all securely.
STEP 3:
Screw 2x 45mm bolts (#2) into the two outer drill holes using the washers (#3) and
split washers (#4) (as shown) to secure the back panel (A).
#1 A
B
#3
#4
#3
#4
#1
#1
#4
#3
Hardware for Step 2:
2x #3 Washers
2x #4 Spring Washers
2x #1 30mmL Bolts
A
B#2
#2
#3
#4
#4 #3
#3
#4
#2
Hardware for Step 3:
2x #3 Washers
2x #4 Spring Washers
2x #1 45mmL Bolts

5
STEP 4:
Position the left hand front leg C over the seat corner, ensure the shaping of the leg
is sloping upward. Screw 2x longer 45mm bolts (#1) using the washers (#3) and split
washers (#4) into the drill holes.
Repeat with the right hand front leg C.
Please note: Again, it is easier to semi-tighten all the bolts rst, before going on to
tighten them all completely.
STEP 5:
Ensure all bolts are fully tightened.
#2
Copyright© 2012 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
A
B
#3
#4
#2
#4
#3
Hardware for Step 4:
4x #3 Washers
4x #4 Spring Washers
4x #2 45mmL Bolts
2x
2x
2x
C
#22x
#42x
#32x
#2
#3
#4