Great Little Trading Small Classic Toybox User manual

1
30/05/2019
V1
easy - medium - hard
Assembly Difculty
two-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
Small Classic Toybox

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface.
• IMPORTANT! The lid support mechanism must be installed correctly to
ensure that entrapment risks are not present. Check to make sure the
lid support is correctly installed by moving the lid up and down.When
you let go of the lid it should stop, not fall or slam shut.
• Maximum weight on lid: 50kgs
• Check all xtures and ttings regularly and tighten as necessary.
• Please retain these instructions for future reference
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E
1x Front Panel
#1 #2
#3 #4
#5 #6
20x Screws
25mmL
10x Screws
10mmL
14x Wooden Dowels
35mmL
2x Hinges
You will need
(not supplied)
Philips Head Screwdriver
Component Check List Component Check List
1x Back Panel
2x Side Panels 1x Base Panel
1x Lid Panel 1x Safety Hinge

4
STEP 2:
Attach base panel D, ensuring the rounded corners are at the front of the unit
with the cut out handle.
Hardware for Step 1:
STEP 1:
Attach front panel A, back panel B and 2x side panels C together.
8x #2 Screws 25mmL
A
B
C
C
#1 x2
#1 x2
#1 x2
#1 x2
#2
#2
#2
#2
#2
#2
#2 x2
8x #1 Wooden Dowels
#1
#1 x2
#1
#2
#2
#2 #2
#2 x2
Hardware for Step 2:
8x #2 Screws 25mmL
6x #1 Wooden Dowels
D
Note: When positioning the base panel,
ensure the rounded corners are at the
front of the unit with the cut out handle.

5
STEP 3:
Attach the 2x hinges (#4) to the lid panel E using the small screws (#3)
STEP 4:
IMPORTANT: 2 people are needed to complete this step safely.
With the assistance of a second person to hold the lid panel H in place, secure
the hinges to the toy box with the smaller screws (#3).
4x #3 Screws 10mmL
Hardware for Step 3:
2x #4 Hinges
#4
#4
#3
#3 E
E
#3
#3
#3
6x #3 Screws 10mmL
Hardware for Step 4:
#4

6
STEP 5:
IMPORTANT: 2 people are needed to complete this step safely.
Attach safety hinge.
We suggest you attach the lower part of the safety hinge rst, then tilt the lid
until the screws at the top of the hinge can be secured.
It is important to fully insert the screws that attach the safety hinge to ensure
the hinge works correctly.
Do not leave the screws protruding.
Hardware for Step 5:
1x #5 Safety Hinge
Copyright© 2019 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
#5 #2 x2
#2 x2
#5
4x #2 Screws 25mmL
Your unit is ready to use