Great Little Trading Abbeville L4620 User manual

1
Abbeville Storage - Bench
L4620
23/12/2021
V2
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
GLTC Ltd, 12 Buckhold Road,Wandsworth, London, SW18 4GP, United Kingdom

2
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [email protected]
Thank you.
SAFETY WARNINGS!
• This product has been designed, manufactured and tested to comply with
BS EN 17191:2021 seating for children.
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Assemble and use on a at and level surface.
• Children should be kept away from the product during assembly to avoid
any possible risk of injury.
• This product is suitable for children in the age range of 3 years plus.
• Maximum weight load 100Kg. Do not overload.
• DO NOT place this product near a window as it can be used as a step by
the child and cause the child to fall out of the window.
• DO NOT place this product near a window where cords from blinds or
curtains could strangle a child.
• Be aware of the risk of open res and other sources of strong heat in the
vicinity of the product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• WARNING. Do not use this bed if any part becomes broken, torn or
missing. Please contact GLTC Customer Services on 0344 848 6000
immediately to arrange for suitable replacement parts.
IMPORTANT
READ CAREFULLY - KEEP FOR
FUTURE REFERENCE.

3
Component Check List
A B
Component Check List
#1
#2 #3
#4
C D
#5
EF
G H
I
1x Allen Key
22x Wooden Dowels
20mmL
8 x Bolts
42mmL
1 x Back Panel
1x Base Panel 1x LH Side Panel
2 x Divider Panels 1 x Right Side Panel
1 x Top Panel 1x LH Upstand
1 x RH Upstand 1 x Upstand
8 x Barrel Nuts
14mm Diameter
8 x Cam Locks
14mm Diameter
#6 #7
9 x Screws
25mmL
You will need (not supplied)
Philips Head Screwdriver
8x Cam Dowels
35mmL
12 x Screws
16mmL

4
Hardware for Step 1:
8x #1 Bolts 42mmL
STEP 2:
Assemble the upstand by attaching panels F and G to panel H as shown with x2
screws (#6). Insert x6 wooden dowels (#3) to the top panel (E) and slot the upstand
to this top panel. This will be secured in the next step.
Hardware for Step 2:
2x #6 Screws 25mmL
STEP 1:
Orientate panels B, C and D as shown ensuring that the larger hardware holes are at
the top of all panels and the grooved edge of the side panels B and D are facing down.
Insert x8 barrel nuts (#2) and x6 wooden dowels (#3) to the ends of panels B, C and
D.
Align base panel (A) to the panels ensuring that the rounded corners are facing up and
the grooved edge is to the oor. Secure the base panel with x8 bolts (#1) using the
allen key provided.
6x #3 Wooden Dowels
8x #2 Barrel Nuts
8x #3 Wooden Dowels
F
G
H
#6
#6
#3
#3
#3
#3 #3 #3
E
A
B
C
D
C
#1 #1 #1 #1
#1
#1 #1 #1
#2
#2
#2
#2
#3
#3
#3

5
STEP 4:
Insert x8 wooden dowels (#3) to the top of panels B, C and D and slot top panel
(E) to these panels. Secure with x8 cam locks (#4).
Hardware for Step 3: STEP 3:
Carefully turn over the top panel and upstand and secure the
upstand with x7 screws (#6). Afx x8 cam dowels (#5) to this
side of the top panel (E).
7x #6 Screws 25mmL
#5
#5
#5
#5
#5 #5
#5
#5
#6 #6
#6
#6 #6 #6
#6
#6
#5
8x #5 Cam Dowels
E
B
D
CC
#4
#4
#4
#4
#4
#4
#3 #3 #3 #3
x2 x2 x2 x2
#4
#3
Hardware for Step 4:
8x #4 Cam Locks
8x #3 Wooden Dowels
Note:
Do not use power tools.
Turn each of the cam locks
(#4) clockwise to lock them.

6Copyright© 2012 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
#7
#7
#7
#7
#7
#7
#7 #7
#7
#7
#7
#7
STEP 5:
Slot the back panel (I) into the grooves and secure with x12 screws (#7).
Hardware for Step 5:
12x #7 Screws
I
Your item is ready to use.