Great Little Trading Sweetheart L4647 User manual

1
Sweetheart Dressing Up Rail
A few important pointers before you start:
• It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
the date and version number on the front of this leaet against that of
any site updates.
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the
tools you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
L4647
20/11/2018
V1
easy - medium - hard
Assembly Difculty
two-person job
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.
Good luck!

2
Safety Warnings:
• This is not a toy.
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Maximum weight load for rail or shelf is 30kgs (66lbs).To avoid injury
from breakage or collapsing, do not overload.
• To avoid possible injury from tipping, DO NOT allow children to climb
on this product.
• Check all xtures and ttings regularly and tighten as necessary.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you.

3
Component Check List
A B
C D
EF
x2 Side Panels x4 Upstand Panels
x1 Top Shelf Base Panel
x1 Hanging Rail x6 Hangers
x1 Base Panel
#1 #2
#3 #4
8x Wooden Dowels
20mmL 8x Barrel Nuts
8x Bolts
53mmL 1x Allen Key

4
STEP 2:
Slide in base panels (D and C) as shown.
STEP 1:
Insert x4 wooden dowels (#1) to side panel (A) and position the x4 upstand panels (B)
using the wooden dowels. Ensure the grooves on the lower upstand panels align and
that the drill holes are facing inwards.When in place, insert x4 barrel nuts (#2) into the
drill holes and secure with x4 bolts (#3) using the allen key provided.
A
B
B
#1
#2
#3
#2
#1
#3
#1
#1 #2
#2
#3
#3
A
C
D
Hardware for Step 1:
4x #3 Bolts 53mmL
4x #1 Wooden Dowels
4x #2 Barrel Nuts
Please note: You may need a
second person to support the
upper upstand panels when
securing these to the side panel.
B
B

5
STEP 3:
Place one end of the hanging rail (E ) into the cut out in the attached side panel (A).
Then insert x4 wooden dowels (#1) to the ends of the upstand panels (D) and secure
the second side panel (A) using x4 barrel nuts (#2) and x4 bolts (#3).
#3
#3
#3
#3
A
A
C
#2
#2
#2
#1
#2
E
#1
#1
STEP 4:
Add the x6 hangers to the rail.Your item is ready to use.
Hardware for Step 3:
4x #3 Bolts 53mmL
4x #1 Wooden Dowels
4x #2 Barrel Nuts Copyright© 2018 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
F
x2