Great Little Trading L4378 User manual

1
Tomorrow’s Clothes Rail
25/08/2020
V2
easy - medium - hard
Assembly Difculty
L4378
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Adult Assembly required
• Unassembled product contains small parts which may present choking
hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check xtures and ttings regularly and tighten as necessary.
• Wall xings not included. Please use appropriate xings that are
suitable for the wall type. If in doubt, please seek professional advice.
• Maximum weight on shelf 6KG, maximum weight on rail 20kg.
• Do not overload during use.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A B
1x Shelf
C
1x Side Panel
D
1x Back Panel
You will need (not supplied)
Phillips Head Screwdriver
#1 #2
1x Clothes Rail
10x Cam Dowels
35mmL
E
1x Side Panel
10x Cam Locks
14mm dia
Hardware for Step 1:
x2 #2 cam dowels
x2 #1 cam locks
STEP 1:
Insert 2x cam dowels (#2) into shelf (A). Now attach back panel (B) to shelf (A)
using 2x cam locks (#1).
#1
#2
B
A
#1
#2
Turn cam locks
180 degrees or
until tight.

4
Copyright© 2018 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 2:
x8 #2 cam dowels
x8 #1 cam locks
STEP 2:
Insert 8x cam dowels (#2) into side panels D and E. Now attach panel D to panels A
and B using 4x cam locks (#1).
Now attach panel E to side panels A and B using 4x cam locks (#1). The clothes
rail (C) should be positioned into the holes on panels D and E as panel E is being
secured with the cam locks.
#1
B
A
C
D
E
#1
#2
#1
#1
#1
#1
#1
#1
x4
#2
x4
Turn cam locks
180 degrees or
until tight.
screws or screws of a similar size. Please
for your wall type. If in doubt, please seek,
professional advice.