Great Little Trading Isla L5198 User manual

1
Isla Dressing Table Mirror
05/05/2021
V1
easy - medium - hard
Assembly Difculty
L5198
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

2
Safety Warnings:
• WARNING! Not suitable for children under 3 years due to small
parts which may become detached and present a choking hazard.
• CAUTION Adult assembly required.Assembly to be carried out by a
competent adult only.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• During assembly children should be kept away from the product due
to possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood
• Wipe clean with a dampened microbre cloth, as other materials may
scratch the acrylic safety mirror.
• Regularly check all fastenings, xtures and ttings to ensure that they
are properly tightened.
• PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
Hardware Check List
A
A
A
B
B
C D
E F
2x
1x
1x
8x Wooden Dowels
25mmL
2x Bolt 31mmL 2x Washer
8x Screws 25mmL
1x
1x
1x
You will need
(not supplied)
Phillips Head Screwdriver
Hardware for Step 1:
Hardware for Step 2:
x2 #1 Wooden Dowels 25mmL
x6 #1 Wooden Dowels 25mmL
x4 #2 Screws 25mmL
x4 #2 Screws 25mmL
STEP 1:
Attach panel B to the two panel As using 2x Wooden
Dowels (#1), secure using 4x Screws (#2.)
STEP 2:
Attach panel C to panel B using 2x Wooden Dowels (#1),
then attach panel D to panels C, A and A using 4x Wooden
Dowels (#1), secure using 4x Screws (#2.)
#1
#1
#1
#1
#1
#3
#2
#4
#2
#2
#2
#2
#2
#2
#2
#2
#2
A
D
C
A
#2
#1
#1
#1
#1
B

4
Copyright© 2021 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 3:
x2 #3 Bolt 31mmL
x2 #4 Washer
E
F
E
#3
#3
#3
#4
#4
#4
STEP 3:
To secure the Mirror panel (E), align between the two panel As with the 2x
Washers (#3) in-between the panels. Secure with 2x bolts (#4).
The mirror panel is adjustable so it faces the right height, to secure the
position tighten the 2x bolts (#4).