Great Little Trading Junior L5294 User manual

1
Junior Storage Bench
01/11/2021
V1
Assembly Difculty
easy - medium - hard one person job
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
L5294
GLTC Ltd, 12 Buckhold Road,Wandsworth, London, SW18 4GP, United Kingdom

2
IMPORTANT!
READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE
SAFETY WARNINGS!
• This product has been designed, manufactured and tested to comply
with BS EN 17191:2021 seating for children.
• Adult assembly required.
• Unassembled product contains small parts which may present a choking
hazard.
• Assemble and use on a at and level surface.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• This product is suitable for children in the age range of 3 years plus.
• Maximum weight load 100Kg. Do not overload.
• DO NOT place this product near a window as it can be used as a step
by the child and cause the child to fall out of the window.
• DO NOT place this product near a window where cords from blinds
or curtains could strangle a child.
• Be aware of the risk of open res and other sources of strong heat in
the vicinity of the product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• WARNING. Do not use this bench if any part becomes broken, torn
or missing. Please contact GLTC Customer Services on 0344 848 6000
immediately to arrange for suitable replacement parts.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• The painted/lacquered surface is resistant to staining if cleaned
immediately, however please protect the surface from contact with
ball point pen and indelible style felt markers as the ink is by nature
permanent.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
E F
G H
x1 Base Panel 1x Divider Panel
1x Front Panel
1x Top Panel
1x Side Panel
15x Cam Dowels 32x Wooden Dowels
15x Cam Locks
1x Back Panel
1x Support Bar
1x Side Panel
Component Check List
Hardware Check List
#1
#3
#2
Hardware for Step 1:
1x #1 Cam Dowel
#1
A
#1
STEP 1:
Please note, you will be building this unit with the back facing up.
Working on a protective surface like a carpet or rug, take base
panel (A) and insert 1x cam dowel (#1) into the hole in the centre
of the panel with the help of a Philips screwdriver.

4
#2
#2
#3
#2
#3
A
B
STEP 2:
Insert 2x wooden dowels (#2) into the holes next to the cam dowel
on panel (A).
Now, take divider panel (B) and connect to base panel (A) with the
larger drill holes as shown.
Please note that the 3 drill holes on the edge of divider panel (B) must
be facing up and at the end that is connecting with base panel (A). If it
is not the case, it is in the wrong position.
When in place, insert 1x cam lock (#3) into the large hole on panel
(B) and turn clockwise to secure.
Hardware for Step 2:
2x #2 Wooden Dowels
1x #3 Cam Lock
Hardware for Step 3:
2x #1 Cam Dowels
#1
#1
#1
C
STEP 3:
Using a Philips screwdriver, prepare front
panel (C) by inserting 2x cam dowels
(#1) on the edge of the panel into the
inner holes as shown.
STEP 4:
Now, insert 4x wooden dowels (#2) into the remaining smaller holes on front
panel (C) as shown.
Then, take the assembled panels (A) and (B) and connect to front panel (C) with
the larger drill holes as shown.
When in place, insert 2x cam locks (#3) into the 2 large holes on panel (A) and
turn clockwise to secure.
C
B
#2
#2
#2
#2
#2
#3
#3
A
Hardware for Step 4:
4x #2 Wooden Dowels
2x #3 Cam Locks
Using Cam Locks:
When inserting into
the panel, ensure that
each cam lock’s arrow is
pointing towards the drill
hole on the side edge of
the panel & the dowel that
it will be receiving.
When the panels are in
the connected position,
using a screwdriver,
turn the cam lock in a
clockwise direction to lock
and secure.

5
Hardware for Step 5:
1x #1 Cam Dowel
#1
#1
D
STEP 5:
As completed for step 1, prepare back panel (D) by inserting 1x cam
dowel (#1) into the hole in the centre of the panel with the help of a
Philips screwdriver.
STEP 6:
Insert 2x wooden dowels (#2) into the outer holes on the edge of panel
(B) as shown.
Connect base panel (D) to divider panel (B) and when in position, insert
1x cam lock (#3) into the large hole on panel (B) and turn clockwise to
secure.
Hardware for Step 6:
2x #2 Wooden Dowels
1x #3 Cam Lock
D
B
A
#1
#2
#2 #2
#1

6
Hardware for Step 7:
3x #1 Cam Dowels
#1
E
#1
#1
#1
F
E
#3
#3
#2
#2
#2
F
#3
STEP 7:
Take top panel (E) and the support bar (F), and insert 3x cam dowels (#1)
into the correct holes as indicated.
STEP 8:
Insert 2x wooden dowels (#2) into the outer holes of the long edge of top
panel (E).
Connect the support bar (F) to the edge of top panel (E) as shown. When
in place, insert 2x cam locks (#3) into the large holes on panel (E) and turn
clockwise to secure.
Please note the hardware and drill holes on the top panel should be facing
up as shown (this is the underside of the top panel), panel F should be
protruding down.
Please refer to the next step 9 to see how the support bar (F) and top
panel (E) must look like once assembled.
Hardware for Step 8:
2x #2 Wooden Dowels
2x #3 Cam Locks

7
Hardware for Step 10:
#3
#2
E
#2
#2 #2
#2
C
D
B
8x #1 Cam Dowels
#1
#1
#1
G
#1
#1
#1
#1
#1
#1
H
STEP 10:
Prepare side panels (G) and (H) by inserting 8x
cam dowels (#1) into the indicated holes.
Hardware for Step 9:
4x #2 Wooden Dowels
1x #3 Cam Lock
BACK
FRONT
F
#3
With Flat Panel
With
Storage Sections
STEP 9:
Carefully stand the
unit onto its base, and
insert 4x wooden dowels
(#2) into the remaining holes on
panels (C) and (B) as shown.
Take the top of your bench with panels
(E) and (F) previously assembled, and
connect it to the base of your unit.
Please ensure that the support bar (F) is at the
back of the unit as shown.
When in position, insert 1x cam lock (#3) into the large
hole on panel (B) and turn clockwise to secure.
Please ensure that the support bar (F) is at the back of the unit
(above the storage areas) as shown.

8
#3
#2
D B
G
E
H
#2
#3
G
EBD
Hardware for Step 12:
9x #2 Wooden Dowels
4x #3 Cam Lock
STEP 11:
Carefully turn the unit on its left side to insert 9x wooden dowels
(#2) into the smaller holes on panels (A), (C), (D), (E) and (F).
Then, take side panel (G) and connect it to the rest of the unit
ensuring that the curved corner of panel (G) is positioned at the
front of the unit (with at panel) as shown.
Once in position, insert 4x cam locks (#3) into the large holes on
panels E (x2), D & C and turn clockwise to secure.
STEP 12:
Gently turn the unit on its right side, and repeat step 11 to attach side panel
(H) using 9x wooden dowels (#2) and 4x cam locks (#3).
Hardware for Step 11:
9x #2 Wooden Dowels
4x #3 Cam Lock
BACK
FRONT
#2
#2
#2 #2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#2
#2
#2 #2
#2 #2
#2
#2
#2
#3
#3
#3
#3
#3
#3
FRONT
BACK
With Flat Panel
With
Storage Sections

9
Copyright© 2022 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 13:
Your product is now ready to use.