Great Little Trading Greenaway L5009 User manual

1
Greenaway Freestanding Bookcase
L5009
Assembly Difculty
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
20/07/2020
V1
one-person job
easy - medium - hard

2
Safety Warnings:
• Adult assembly required.
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• Assembly to be carried out by a competent adult only. During
assembly children should be kept away from the product due to
possible risk of injury. Do not use this item if any components are
missing or damaged.
• DO NOT over load. Max weight 50Kg in total.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface.
• This product is heavy. We recommend that you build it where you are
planning to use it.
• Serious or fatal crushing injures can occur from furniture tipping over.
In order to prevent overturning, ensure you secure this furniture
product to the wall before you use it, using the anti-tip kit device
provided. If you have not yet received an anti-tip kit with your product
please contact customer services. You will need to source suitable
xings for your wall . If in doubt, please consult a qualied trades
person.
• DO NOT let children climb or swing on the shelves as this may lead
to injury and overturning of the furniture.
• Place the heaviest items in the lower shelves.
• Regularly check all xtures and ttings to ensure that they properly
tightened and tighten as necessary.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
A B
C D
EF
1x Side Panel
Component Check List Component Check List
1x Side Panel
1x Upper Back Panel 1x Front Panel
2x Shelf Panels 1x Lower Shelf/Base Panel
1x Mid Back Panel 1x Lower Back Panel
G H
I
3x Wooden Poles
#1 #2
#3 #4
#5
You will need
(not supplied)
Philips Head Screwdriver
14x Cam Locks
(12mm H)
4x Cam Locks
(9mm H)
18x Cam Dowels
14x Wooden Dowels
18x Back Panel Screws
(20mm) 1x Anti Tip Kit

4
Hardware for Step 1:
STEP 1:
Working on a protective surface, prepare the base panels.
Lay front panel D on the oor with the drill holes facing up and insert 2x cam
dowels (#2) into the outer holes using a Phillips screwdriver.
2x #2 Cam Dowels
D
F
#2
#1
#1
#4
Hardware for Step 2:
2x #1Cam Locks (12mmH)
2x #4 Wooden Dowels
#4
Using Cam Locks:
When inserting into the panel, ensure
that each cam lock’s arrow is pointing
towards the drill hole on the side
edge of the panel & the dowel that it
will be receiving.
When the panels are in the connected
position, using a screwdriver, turn the
cam lock in a clockwise direction to
lock and secure.
D
#2
#2
STEP 2:
Insert 2x wooden dowels (#4) into the inner holes on panel D, then connect
base panel F with panel D as shown.
Once in position, insert 2x cam locks (#1) into the large drill holes as shown
and turn clockwise to secure.

5
STEP 4:
Insert 6x wooden dowels (#4) into the remaining small
holes on panel A.
Firstly take the joined panels D/F and connect to panel A
at the square base end. Note the orientation - the legs of
panel D should be on the smooth front edge of panel A,
next to the large drill holes.
Insert 2x cam locks (#1) into the large drill holes on panel
F and turn clockwise to secure.
Next take 2x shelf panel E’s and connect to panel A as
shown. Ensure the upstand of the panel E’s is at the front
of panel A and pointing towards the curved top.
STEP 3:
Take side panels A & B and insert 8x Cam dowels (#2) into EACH panel, using
the holes as shown.
#1
#1
#4
#4
#4
#4
#1
#3
#3
#1
#1
#1
#1
C
E
E
A
D
F
Hardware for Step 4:
6x #1 Cam Locks (12mmH)
2x #3 Cam Locks (9mm H)
6x #4 Wooden Dowels
A
#2
#2
#2
#2
#2
#2
#2
Hardware for Step 3:
16x #2 Cam Dowels
#3
BASE
FRONT
TOP
#2
#2
B
#2
#2 #2
#2
#2
#2
#2
#2
#2 Now take upper
back panel C and
connect to panel A,
ensuring that the
large drill holes are
facing back (so they
will not be visible
from the front).
When in place,
insert 2x thinner
cam locks (#3) into
the large drill holes
and turn clockwise
to lock.
Insert 2x cam locks (#1) into EACH
shelf panel E and turn clockwise to
secure.

6
STEP 5:
Insert 3x wooden poles (I) into the large drill holes of panel A.
STEP 6:
Insert 6x wooden dowels (#4) into the central holes in the edges of panels C,
E, E & F plus the 2 holes in panel D.
Now take panel B (with hardware already inserted) and align over the
bookcase panels constructed and the wooden poles. Push into place.
Insert 6x cam dowels (#1) into the large drill holes on the undersides of
panels E, E and F. Turn clockwise to lock.
Insert 2x thinner cam dowels (#3) into the large drill holes on the back of
back panel C and turn clockwise to lock.
#1
#1
#1
#1
#4
#4
#4
#4
#1
#1
#3
#3
#3
Hardware for Step 6:
6x #1 Cam Locks (12mmH)
2x #3 Cam Locks (9mm H)
6x #4 Wooden Dowels
B
F
E
E
C
D
A
I
I
I

7
STEP 7:
Carefully lay the unit onto its front.
Lay mid back panel G and lower back panel H onto
the unit - ensure the holes on the back panels and
the pilot holes in the unit are clearly aligned.
Hardware for Step 7:
18x #5 Back Panel Screws (20mm)
#5
H
G
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Carefully insert 18x back panel
screws (#5) into the holes
and tighten with a Phillips
screwdriver. It is important
these screws are inserted
straight or you risk damaging
the unit.
Now apply the anti-tip kit
brackets into the holes
highlighted, using the hardware
provided in the kit.
It is recommended that you
use the anti-tip kit on this
furniture. So complete the
application of the anti-tip kit as
per the instructions provided.
Your unit is now ready to use.