Great Little Trading Dandelion L5015 User manual

1
Dandelion Toddler Table
L5015
05/06/2020
V1
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
• It might be worth checking on our website that there are no updates
or revisions to these instructions, (if we have had helpful feedback from
our other customers we pass it on via the product web page. Simply
check the date and version number on the front of this leaet against
that of any site updates.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• In an unassembled state product contains small parts which may pose
a choking hazard, not suitable for children under 3 years.
• CAUTION Adult assembly required. Assembly to be carried out by a
competent adult only. During assembly children should be kept away
from the product due to possible risk of injury. Do not use this item if
any components are missing or damaged.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Assemble and use on a at and level surface.
• To avoid possible injury, DO NOT allow children to climb on the
product.
• DO NOT allow your child/children to throw the central table cover as
this may cause injury.
• The central storage bag can be removed by an adult for washing. Please
ensure you safely keep the screws out of reach of children until the
bag is replaced on the table, as these screws present a choking hazard.
• The storage bag is intended for light weight items only.
• Regularly check all xtures and ttings to ensure that they properly
tightened and tighten as necessary.
• Remove all packaging and dispose of carefully before letting your child
use the table.
• PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• The painted/lacquered surface is resistant to staining if cleaned
immediately, however please protect the surface from contact with
ball point pen and indelible style felt markers as the ink is by nature
permanent.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A
A
B
C
C
#1 #1
#1
#1
1x Table top 4x Legs
4x Plastic washers
You will need
(not supplied)
Phillips Head Screwdriver
The storage bag should come pre-attached to the table top.
When you wish to wash the storage bag, you will need a
Phillips head screwdriver to remove & re-insert the screws
holding it in place.
Hardware for Step 1:
x4 #1 Plastic washers
STEP 1:
Working on a protected/carpeted surface
to prevent damage to your table, take the
table top (A) and turn it over so that the 4
wooden blocks are facing up.
Thread a plastic washer (#1) over the end
of the threaded rod of one leg (B) and
insert into the wooden block. Turn the leg
with your hands and FULLY tighten.
Repeat with remaining 3 legs (B).
Ensure all legs are fully tightened before
standing the table onto its feet.
STEP 2:
Insert the central table top cover (C) and your table is now ready to use.
1x Central table top cover
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
B
B
B
B
#1
A