Handicare WINNER 2004 User manual

SERVICE MANUAL
WINNER 2004

2 Version 2015v1
© 2011 Handicare
All rights reserved.
The information provided herein may not be reproduced and/or published in any form, by print, photo print, microfilm or any other means
whatsoever (electronically or mechanically) without the prior written authorization of Handicare.
The information provided is based on general data concerning the constructions known at the time of the publication of this manual. Handicare
executes a policy of continuous improvement and reserves the right to changes and modifications.
The information provided is valid for the product in its standard version. Handicare cannot be held liable for possible damage resulting from
specifications of the product deviating from the standard configuration.
The available information has been prepared with all possible diligence, but Handicare cannot be held liable for possible errors in the
information or the consequences thereof.
Handicare accepts no liability for loss resulting from work executed by third parties.
Names, trade names, etc. used by Handicare may not, as per the legislation concerning the protection of trade names, be considered as being
available.
XXXXXX-000001000-en.doc

Table of contents
Version 2015v1 3
This manual.................................................................................................................................................................5
Product reference .......................................................................................................................................................6
Available documentation ...........................................................................................................................................8
Service and technical support...................................................................................................................................8
Identification plate ......................................................................................................................................................8
Identification of the product ......................................................................................................................................8
Warranty ......................................................................................................................................................................9
Used scooters and the environment ......................................................................................................................10
Use according to purpose
1
......................................................................................................................................10
1. General safety regulations and instructions ..................................................................................................11
1.1. Decals and instructions on the scooter ........................................................................................................11
1.2. Technical specifications ...............................................................................................................................11
1.3. Modifications.................................................................................................................................................11
1.4. Safety11
2. Adjustment options...........................................................................................................................................13
2.1. Seat adjustments..........................................................................................................................................13
2.1.1. Adjusting the seat height and depth...............................................................................................13
2.1.2. Backrest adjustment ......................................................................................................................13
2.1.3. Lower-backrest adjustment............................................................................................................13
2.1.4. Adjusting the arm-rest....................................................................................................................14
2.1.5. Adjusting the headrest (option) ......................................................................................................14
2.2. Adjusting the steering column ......................................................................................................................14
3. Drive programs ..................................................................................................................................................15
3.1. Controller settings Winner Solo....................................................................................................................15
3.2. Controller settings Winner S-drive 120A ......................................................................................................16
3.3. Controller settings Winner S-drive 140A Schmid MK1 D51313...................................................................17
3.4. Controller settings Winner S-drive 140A Schmid MK2 D51446...................................................................18
3.5. Controller settings Winner S-drive 140A Schmid Alpine MK1 D51313........................................................19
3.6. Controller settings Winner S-drive 140A Schmid Alpine MK2 D51446........................................................20
3.7. Controller settings Winner S-drive 140A CT Reduced speed......................................................................21
3.8. Controller settings Winner S-drive 140A CT MK1 D51313. .........................................................................22
3.9. Controller settings Winner S-drive 140A CT MK2 D51446. .........................................................................24
3.10. Electrical Diagram S-Drive .................................................................................................................25
3.11. Connections printed circuit board ......................................................................................................26
4. Technical specifications ...................................................................................................................................27
4.1. Product specifications ..................................................................................................................................27
4.1.1. Winner............................................................................................................................................27
4.2. Approval .......................................................................................................................................................28
4.3. Service information transaxles. ....................................................................................................................28
5. Use of the parts lists .........................................................................................................................................29
001: SCOOTER ASSY (3W) ...............................................................................................................................30
002: SCOOTER ASSY (4W) ...............................................................................................................................31
003: CONSOLE TOP COVER ASSY ..................................................................................................................32
004: CONSOLE BOTTOM COVER ASSY ..........................................................................................................33
005: CONSOLE PANEL ASSY............................................................................................................................34
006: WIG-WAG ASSY .........................................................................................................................................35
007: TILLER ASSY..............................................................................................................................................36
008: CHANNEL FRONT ASSY ...........................................................................................................................37
009: BACK TILLER SHROUD ASSY ..................................................................................................................38
010: SCOOTER ASSY (3W) ...............................................................................................................................39
011: SCOOTER ASSY (4W) ...............................................................................................................................40
012: FRONT TIRE ASSY (3W)............................................................................................................................41
013: FRONT FORK (3W) ....................................................................................................................................42
014: FRONT FORK ASSY (3W)..........................................................................................................................43
015: FRONT FRAME ASSY (3W) .......................................................................................................................44
016: FRONT FRAME ASSY (4W) .......................................................................................................................45
017: KNUCKLE RHS ASSY (4W)........................................................................................................................47
018: KNUCKLE LHS ASSY (4W) ........................................................................................................................48
019: FLOORPAN ASSY (3W) .............................................................................................................................49
020: SCOOTER ASSY (3W) ...............................................................................................................................50
021: FLOORPAN ASSY (4W) .............................................................................................................................51
022: SCOOTER ASSY (4W) ..............................................................................................................................52
023: BODY FRAME ASSY (3W) ........................................................................................................................53
024: BODY FRAME ASSY (4W) ........................................................................................................................54

4 Version 2015v1
025: REAR FRAME ASSY .................................................................................................................................55
026: REAR TIRE ASSY......................................................................................................................................56
027: TRANSAXLE ASSY....................................................................................................................................57
028: TRANSAXLE STANDARD .........................................................................................................................58
029: TRANSAXLE ALPINE ................................................................................................................................59
030: SCOOTER ASSY (3W) ..............................................................................................................................60
031: SCOOTER ASSY (4W) ..............................................................................................................................61
032: BATTERY COVER ASSY...........................................................................................................................62
033: REAR MOTOR COVER ASSY...................................................................................................................63
034: CONTROLLER COVER ASSY....................................................................................................................64
035: CONTROLLER ASSY .................................................................................................................................65
036: SEAT & SEAT FRAME................................................................................................................................66

Preface
Version 2015v1 5
This manual
This manual contains the basic instructions for repairs and general maintenance of the Winner electric scooter.
Mechanics who do repairs on this scooter must be well trained and familiar with the repair methods and the
maintenance of the Winner electric scooter.
It is important to see to it that work is always done safely, particularly with respect to activities where the scooter
must be lifted up.
We advise that you contact our service department before doing repair work on a scooter that has been involved in
an accident.
The following specifications are important when ordering parts:
-Model
-Manufacture year
-Color
-Identification number
-Part number
-Name of the relevant part
This information can be found on the identification plate. See 'Identification of the product'.

Preface
6 Version 2015v1
Product reference
XXXXXX-010004000-en.doc
The product has the following decals and labels.
A. Charging connection
B. Fuse for lighting
C. Automatic fuse
D. Driving
E. Pushing
F. Tire pressure wheels
G. Reverse – Forward drive
010004000
E
D
C
F
G
B
A

Preface
Version 2015v1 7
A. Charging connection
For charging the batteries, see 'charging'.
PICPRO-010004210-en.doc
B. Fuse for the lighting
Here you find the fuse for the lighting. See 'Product specifications'.
C. Automatic fuse
The scooter has a safety fuse feature. See 'automatic fuse' and 'faults'.
PICPRO-010004270-en.doc
D. Driving
The drive of the motor is switched on: the scooter can be electrically driven.
E. Pushing
The drive of the motor is disconnected: the scooter can be pushed electrically.
F. Tire pressure wheels
For tire pressure of the wheels, see 'product specification sheet'.
G. Reverse – Forward drive
When the operating handle is pressed, the scooter will drive forward or in reverse. See ‘Driving
forward and in reverse’.
The following pictograms are used in this manual:
XXXXXX-010004020-en.doc
CAUTION
Procedures that can result - if they are not executed properly - in damage to the product, the
environment, or human injury.
PICDOC-010004110-en.doc
ATTENTION!
Suggestions and advice for conducting the relevant tasks or activities more easily.
PICDOC-010004120-en.doc
Consult the specified information source(s) first.
PICDOC-010004130-en.doc
Pull the charge cord out of the charging connection of the scooter before doing any
maintenance on the scooter.
PICDOC-010004140-en.doc
MAX. BAR2,7

Preface
8 Version 2015v1
Available documentation
The following technical documentation is available / required to service this scooter:
-Owner's manual
-Service manual.
XXXXXX-010005000-en.doc
Service and technical support
For information concerning specific settings, maintenance or repair work please contacts your dealer. He is always
prepared to help you.
Ensure you have at hand:
Model
Manufacture year
Identification number
This information can be found on the identification plate. See 'Identification of the product'.
XXXXXX-010006000-nl.doc
Identification plate
• See fig. 000000010.
On this plate (A) information on the product can be found. See: 'Identification
of the product'.
Identification of the product
• See fig. 010007010.
A. Model
B. Manufacture year
C. Identification number
D. User area indoors or outdoors
E. Maximum load in kg
• For the place of the identification plate, see 'main components'.
XXXXXX-010007010-en.doc
A
000000010
¤
LAGE DIJK 10 5705 BZ HELMOND THE NETHERLANDS
TYPE/TYPE/TYP: CAT
YEAR/JAAR/JAHR: 2000 IDNR.: CT 00004
USAGE:  INDOOR/OUTDOOR
GEBRUIKSGEBIED:  BINNEN/BUITEN
GEBRAUCHSBEBIET:INNERHALB/AUSSERHALB
MAX.LOAD/MAX.BELASTB./ZUL.GESAMTGEW.: 100 KG
010007010
D
A
B
C
E

Preface
Version 2015v1 9
Warranty
Definitions of terms used in this warranty:
• Consumable part: Part that is subjected to natural wear and tear or natural contamination during normal operation
within the lifetime of the product (section 9 of Handicare’s general terms and conditions of sale);
• Client: Those who purchase the product directly from Handicare;
• Corrective action: Repair, replace or refund of the product;
• Dealer: Those who re-sell the product to the User;
• Defect: Any circumstance due to which the product is not sound or fit to use, caused by a lack of quality of the
material used to manufacture the product as well as the quality of the manufacturing process;
• Option: An accessory delivered by Handicare to extend the standard product model;
• Product: Product that is delivered according to brochure or contract (e.g. wheelchair, scooter, battery-charger etc.);
• Part: Part of product that can be exchanged or replaced. This can be an option, accessory, service part or
consumable part;
• Returns: Product or part that needs to be returned;
• RMA-process: Process to return goods, contact Handicare’s Customer Service;
• Service part: Part that is durable and may be subjected to natural wear and tear or natural contamination during
normal operation within the lifetime of the product.;
• User: Those who use the product;
• Warranty: The rights and obligations set forth in this document;
• Warranty period: The period of time during which the warranty is valid;
• Warranty provider: Handicare B.V., Vossenbeemd 104, 5705 CL Helmond, The Netherlands.
Notwithstanding the rights and obligations of Handicare, Client and User set forth in Handicare’s general terms and
conditions of sale, the rights of the Client and/or User towards Handicare in case of defects are limited to the
provisions set forth in this warranty. For the duration of the warranty period Handicare guarantees that the product
is without defects.
In case of any defects the User is required –within two weeks after discovery of the defect- to contact the dealer.
He has to complete a return form and return the product or part via the RMA-process. Handicare will, at its sole
discretion, take the corrective action it seems fit under the given circumstances within a reasonable period of time
(depends on nature of claim) from receipt of the completed return form. The warranty period will not be extended
after a corrective action.
Warranty period table
Power wheelchairs / scooters
Description
Warranty period
Examples
include, but are not limited to
the parts mentioned below
Frame
2 years Weldment/frame
Drive system
1 year Transaxle, motor, motor brake
Electronics
1 year Controller, controlling mechanism, wiring
harness, electronic components
Service Parts
New: 1 year after invoice
Repaired: 90 days after invoice
Brakes
Consumable parts
40 days after invoice Wheels, push handles etc.
Options/Accessories
2 years Mirror, mudguards etc.
Not being service part or consumable part.
Handicare will only accept shipment costs and corrective costs related to warranty on equipment during the
warranty period.
This warranty will void in case of:
• The product and/or its parts being modified or items having been added by others than Handicare;
• Changes in cosmetic appearance by use;
• Failure to observe the instructions for use and maintenance, use other than normal use, wear and tear,
negligence, collateral damage by neglect of earlier symptoms, overloading, third-party accidents, non-original parts
used and defects not caused by the product;
• Circumstances beyond our control (flood, fire, etc.).

Preface
10 Version 2015v1
This warranty does not cover:
• Tyres and inner tubes
• Batteries (covered by the battery manufacturer’s warranty).
Clients and/or Users have legal (statutory) rights under applicable national laws relating to the sale of consumer
products. This warranty does not affect statutory rights you may have nor those rights that cannot be excluded or
limited, nor rights against the entity from whom the product was purchased. Clients may assert any rights they have
at their sole discretion.
Used scooters and the environment
If your scooter has become superfluous or needs to be replaced, it can usually be taken back by
your dealer. If this is not possible, please contact your local authorities for the possibilities of
recycling or an environmentally friendly way of disposing of the used materials.
For the production of the scooter several plastics and metals have been used. The scooter also
contains electronic components that must go to electronic waste. Used batteries belong to
chemical waste.
Use according to purpose
1
The scooter Winner was designed for:
• transport of persons with a weight of up to 159 kg
• use on paved roads, sidewalks, footways, and bike-ways.
• use in and around the house
Your supplier should give you good user's instructions before you can independently operate the product and
participate in traffic.
You must be able to correct the consequences of actions while driving the Winner.
Consider operating the Winner scooter under the monitoring of an experienced dealer during first operations.
The Winner scooter is not a motorized vehicle in the traffic regulations sense.
The Winner has a maximum speed of approximately 12 or 15 km/h (7 or 10 mph), depending on the model.
PLEASE MAKE SURE YOU ARE WELL ACQUAINTED WITH THE CONTENTS OF THIS OWNER’S MANUAL
BEFORE DRIVING THE WINNER.
If you use the scooter for other purposes than those for which it is intended, Handicare accepts no liability
whatsoever for damage or injury resulting from such use other than that for which the scooter was developed and
designed.
'Use according to purpose' as established in EN 292-1 is the use for which the technical product is suitable according to the statement of the manufacturer, including his
instructions in the sales brochure. In case of doubt this is the use that follows from the construction, execution and function of the product. Use according to purpose also
includes taking into consideration the instructions in the owner's manual.

General safety guidelines and instructions
Version 2015v1 11
1. General safety regulations and instructions
Handicare accepts no liability whatsoever for damage or injury caused by the failure to (strictly) adhere to the safety
guidelines and instructions or else due to carelessness during the use and cleaning of the scooter and possible
accessories. Depending on the specific work circumstances or the accessories used, additional safety instructions
may be required. Please contact your dealer immediately if you observe a potential danger during the use of the
product.
The user of the scooter (see under 'use according to purpose') is at all times fully responsible for
the fulfillment of the locally applicable safety regulations and guidelines.
1.1. Decals and instructions on the scooter
Signs, symbols and instructions placed on this scooter comprise part of its safety facilities. They must never be
covered or removed and must remain present and clearly legible throughout the entire life span of the scooter.
Immediately replace or repair illegible or damaged signs, symbols and instructions. Contact your dealer with regard
to this.
1.2. Technical specifications
The technical specifications may not be changed.
1.3. Modifications
Modification of (parts of) this product is not permitted.
1.4. Safety
To avoid accidents and undesirable situations, it is of great importance to pay attention to the following safety
instructions.
•Pay extra attention to riding on slopes:
-Never drive the Winner up a slope with an angle greater than 11°.
-On slopes always drive slowly and with awareness.
-Never drive down a slope at full speed.
-Do not drive down slopes with loose gravel or a sandy surface, because one of the back
wheels might slip.
-Do not turn on a slope.
•Never take curves at full speed. Decrease speed on the approach and on the curve.
•Be sure that no items of clothing hang loose. These could become caught between the wheels.
•Make sure your fingers do not get caught in the mechanism of the steering adjustment.
•Adjust your driving according to the circumstances:
-Drive carefully on slippery roads, resulting from rain, ice, or snow!
-Drive more slowly in crowded environments.
-Do not use the scooter on uneven roads.
-Avoid the Winner from coming into contact with seawater. Seawater is caustic and may
damage the scooter.
-Avoid the Winner from coming into contact with sand. Sand can affect the moving parts of the
scooter, resulting in unnecessarily rapid wear.
•Never operate the scooter when you are under the influence of drugs, alcohol or medication that
could affect your driving ability.
•You must have sufficient visual acuity to be able to drive safely in the scooter.
•You are obliged to put the lights on when the view is hindered.
•Only use the indicator lights to indicate an intended change in driving direction.
•Only use the horn when it is necessary to warn pedestrians of other road users of dangerous
circumstances.
•Never place metal parts on top of the batteries: this may cause a short in the batteries, resulting
in damage.
•Do not take along any passengers: your scooter was specifically designed to transport only
yourself.
•Do not burden your scooter with any more load than can be placed in the basket.
•Never hang anything from the handlebars.

General safety guidelines and instructions
12 Version 2015v1
•Never use your scooter to pull a cart: the scooter was not designed for this. Anyway, it is
prohibited to do so. You might seriously damage your scooter if you do.
•Do not use the footplate as a step.
•Do not place your feet close to the front wheel and the front fork. Always keep your feet on the
rubber mat, rather than against the front cover.
•The scooter is electronically operated. Certain parameters have been factory-set. These settings
guarantee a comfortable and efficient use. It is not permitted to change these parameters.
•The standard version of your scooter was tested according to the strictest EMC requirements.
Mobile telephones have no influence on the driving behaviour of the scooter.
When using a mobile telephone in the vicinity of a scooter with special adaptations, you are
advised to first switch off the scooter.
•Your scooter may influence electromagnetic fields such as alarm systems.
•If the electronics of the scooter is not properly screened off, this may affect sensitive electrical
appliances, such as shop alarms and garage openers. The scooter has been tested for this.
Should any problems of this nature occur, please report these to your supplier immediately.
•Take care in ultra-violet light: this may cause premature deterioration of materials such as rubber,
plastic, and enamel.
•Watch out for protruding parts: these may damage your scooter or the environment.
•Keep your scooter away from open flames.

Adjustment options
Version 2015v1 13
2. Adjustment options
XXXXXX-010500000-en.doc
2.1. Seat adjustments
The Winner seat offers a number of adjustment options to increase the sitting and driving comfort.
The following may be adjusted:
A. Seat height and depth
B. Backrest
C. Lower-back rest
D. Arm-rests
E. Headrest
F. Steering column
2.1.1. Adjusting the seat height and depth
The whole seat may be adjusted as follows:
• 10 cm in height
• 10 cm in forward direction
Both adjustments should be made by the dealer.
2.1.2. Backrest adjustment
• See fig. 000000140.
The backrest is continuously adjustable, from a fully horizontal to a fully
vertical position.
The adjustment must be done as follows:
• Pull up the handle (A) while you are on the seat.
The backrest will now automatically move forward.
• Press the backrest backward by leaning back to a position that is most
comfortable for you.
• After adjustment, push the handle down to secure the backrest in the
position you have chosen.
Attention:
Do not operate the handle if the seat is unoccupied, because the backrest will come forward
very powerfully.
The backrest must be adjusted in such a way that your back is properly supported while driving.
If the backrest is tilted too far backwards, this will negatively influence the seating stability,
especially on slopes.
2.1.3. Lower-backrest adjustment
• See fig. 000000150.
The lower-backrest can be adjusted to various positions, varying from more or
less support in the lower-back area.
The adjustment must be done as follows:
• Seat yourself on the seat.
• Turn knob (A) in such a way that the lower-backrest reaches the most
optimal position for you.
A000000140
A
000000150

Adjustment options
14 Version 2015v1
2.1.4. Adjusting the arm-rest
• See fig. 000000160.
Both armrests can be folded up completely. The height and the angle of the
armrest can be adjusted.
The adjustment must be done as follows:
• Turn wheel (A) to adjust the height and the angle of the arm-rest.
Attention: if the position of the backrest is adjusted, the
position of the
Armrests will change along with it.
2.1.5. Adjusting the headrest (option)
The headrest can be adjusted as follows:
• Three height adjustments
• Tilting forward and back
Adjusting the height of the headrest
The headrest can be pulled up by hand, and will lock into one of three positions by means of a click.
Tilting the headrest:
The headrest can be tilted by hand until the desired position is reached.
2.2. Adjusting the steering column
• See fig. 000000130.
The steering column can be adjusted as follows:
• Pull up handle (A) with one hand, while at the same time pulling the
steering column towards you with the other, until the most comfortable
position is reached.
• Release the handle in the chosen position. Then, release the steering
column.
If you release the steering column while still holding up the handle, the gas-
spring-loaded steering column will move to its most forward position.
Use caution when adjusting the steering column, to avoid
getting your fingers jammed.
A
000000160
A
000000130

Drive programs
Version 2015v1 15
3. Drive programs
A hand held programmer is deliverable for programming the Winner with Solo controller. An user maunal belongs
to the delivery of this manual. For the Winner with S-Drive controller there is a software program available but it’s
also programmable with the hand held programmer.
The driving programs for Handicare products can be found on our FTP server.
Log on to the FTP server:
•Open internet explorer
•Go to ftp://mobilityftp.handicare.com
•Enter user name and password
User name: [e-mail]
Password: dealer
•You will be logged on
•Select your wheelchair and the appropriate controller
•Click the file to download
The standard adjustments are stated in the table below.
3.1. Controller settings Winner Solo
Function
Range
Resolution
High
Low
Forward Acceleration 0.1 to 10s, Fast/Slow 100 ms 30 30
Forward Deceleration 0.1 to 10s, Fast/Slow 100 ms 12 12
Reverse Acceleration 0.1 to 10s, Fast/Slow 100 ms 35 35
Reverse Deceleration 0.1 to 10s, Fast/Slow 100 ms 35 35
Forward speed 0 to 100%, Fast/Slow 1% 100 100
Reverse Speed 0 to 100%, Fast/Slow 1% 40 40
Invert Throttle Polarity Yes/No Yes
Power Down Timer 0 to 20 minutes 1 min 0
Help Mode On-line help text * Not programmable
Diagnostics Fault codes from Solo * Not programmable
Current Limit 20A to max rating 1A 110
Motor Compensation 0 to 1W 5 mW 45
Hold Factor 100 to 420% 4% 152
Mid Current 0 to 100%, 1 to 255s 1%, 1s 15 50
Brake Time 0 to 1s 10 ms 80
ISO Test On / Off On
Inhibit Polarity Hi / Lo Lo
Bridge Hold Time 0 to 5s 20 ms 60
Throttle Gain 0 to 1250% 5% 150
Pulse Reverse Alarm Yes / No Yes
Wig-wag Throttle Yes / No Yes
Low Battery Flash Inhibit Yes / No No
Throttle Deadband 3% to 100% 1% 15
Output Voltage 20 to 40V 1V 24
TruCharge Cable Resistance 10 to 250 mOhm 5 mOhm 40
TruCharge Cal. 1 to 200 100
Profile values - 40 80
Scale I factor - 75
Scale V factor - 157
Options register - -
I limit reduction - 30
Abs I factor - 43
Demand clipping - 160 30
Solo mode - 1

Drive programs
16 Version 2015v1
3.2. Controller settings Winner S-drive 120A
Winner S-Drive 120 15kmh
Speed Settings Fast Slow
Motor Settings
Forward Acceleration (0,1 Seconds) 30 35
Current Limit Max (Amps) 110
Forward Deceleration (0,1 Seconds) 15 13
oost Drive Current (Amps) 120
Reverse Acceleration (0,1 Seconds) 35 40
oost Drive Time (Seconds) 10
Reverse Deceleration (0,1 Seconds) 20 25
Current Foldback Threshold (Amps) 80
Max Forward Speed (%) 100 100
Curerent Foldback Time (Seconds) 70
Min Forward Speed (%) 30 30
Current Foldback Level (%) 59
Max Reverse Speed (%) 50 40
Motor Cooling Time (Seconds) 660
Min Reverse Speed (%) 50 40
Current Foldback Temperature (Deg C) 30
Speed Limit Pot Enabled Off
Current Limit Min (Amps) 10
Motor Compensation (milli Ohms) 20
Operation Settings
Anti Rollback Level 12
Sleep timer (minutes) 20
Pull-away Delay (centi-Seconds) 0
Throttle Invert No
Slope Factor 1275
Anti Rollback Velocity 90
Battery Settings
Low battery Flash Level ( ars) 2
Fa tory Settings Max Min
Cable Resistance (milli-Ohms 40
Acceleration (0,1 Seconds) 100 1
Calibration Factor 100
Deceleration (0,1 Seconds) 100 1
Low attery Alarm Off
Forward Speed (%) 100 0
Reverse Speed (%) 100 0
Inhibit Settings
Inhibit 1: Mode 1
Throttle Settings
Inhibit 1: Operation Latching
Throttle Type 1
Inhibit 1: Speed (%) 0
Throttle Deadband (%) 15
Inhibit 2: Mode 1
Throttle Gain (%) 100
Inhibit 2: Operation Non Latching
Throttle Operated at Power-up 2
(0 = Drive, 1 = Inhibit, 2 = Trip)
Inhibit 2: Speed (%) 50
Throttle Reference Test On
Inhibit 3: Mode 1
Iso Test Resistor On
Inhibit 3: Operation Latching
Inhibit 3: Speed (%) 0
Aux Output: Mode 0
General Settings
Soft Stop Off
rake Time (milli-seconds) 900
Output Voltage (Volts) 24
Status Output Type 2
(0 = Trucharge, 1 = LED, 2 = Analogue)
Diagnostic Flash Sequence 0
Reverse Alarm Off
Pulsed Reverse Alarm Off
Diagnostic Alarm Off
rake Disconnected Alarm Off
rake Fault Detect On
rake Light On
Freewheel Speed Limit 35
Freewheel Time Out (0,01 Seconds) 20
Freewheel Enable Disable
Inhibit 2 Horn Input Enable Off

Drive programs
Version 2015v1 17
3.3. Controller settings Winner S-drive 140A Schmid MK1 D51313.

Drive programs
18 Version 2015v1
3.4. Controller settings Winner S-drive 140A Schmid MK2 D51446.

Drive programs
Version 2015v1 19
3.5. Controller settings Winner S-drive 140A Schmid Alpine MK1 D51313.

Drive programs
20 Version 2015v1
3.6. Controller settings Winner S-drive 140A Schmid Alpine MK2 D51446.