Hearth & Home LOGS-INFINITY User manual

1
LOG PLACEMENT
INSTRUCTIONS
CAUTION: Logs are fragile!
Carefully remove the logs
from the packaging.
Place logs on a piece of
cardboard as shown in
Figure 1. The logs will be
assembled in a similar
orientation to their positions
in Figure 1. Note: Burner is
shown white to improve
contrast.
2003-925 12/02
LOG #1 (SRV2003-702): Place log #1 on the back right of the grate. Place the two slots in the bottom
of the log over the two tabs in the grate. The log may be slightly unstable at this time but will become more
stable with the addition of the other logs.
LOG #2 (SRV2003-701): Place log #2 on the back left of the grate. Place the two slots in the bottom of
the log over the two tabs in the grate.
LogSetAssembly: LOGS-INFINITY
Model: Infinity
4
5 6
7
1
2
3
¬Denotes Flat Spots
¬
¬
¬
¬¬
¬
¬
1
22
1
Figure 1

2
LOG #3 (SRV2003-704):Place log #3 on the front right of the grate. The two grooves on the bottom of
the log and the narrow end of the log line up with the 1st, 2nd, and 3rd grate tines on the right of the grate.
LOG #4 (SRV2003-703): Place log #4 on the front left of the grate. The two grooves on the bottom of
the log line up with the 2nd and 3rd tines on the left of the grate.
LOG #5 (SRV2003-705): Place the “Y” shaped log #5 on top of log #2 and log #4. The longer branch
of log #5 sits on the flat spot on log #2 and the shorter branches sit on the two flat spots of log #4.
3
44
3
55
2
4

3
LOG #6 (SRV2003-706): Place log #6 on top of log #5, #1, and #3. The left end sits on the flat spot of
log #5 and the right end sits on log #3. The “branch” rests on the flat spot of log #1.
LOG #7 (SRV780-707): Place log #7 on top of log #1 and #5. The left end rests on the long flat spot of
log #5. The right end rests on the top of log #1 and rests against the “branch” of log #6.
6
6
77
56
53
1