HIK VISION DS-PEA Series User manual

Panic Alarm Station with Covert Camera
User Manual

Panic Alarm Station with Covert Camera User Manual
ii
User Manual
COPYRIGHT © 2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
This Manual is applicable to panic alarm station.
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE
OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Panic Alarm Station with Covert Camera User Manual
iii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, the
RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste
in the European Union. See the product documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Panic Alarm Station with Covert Camera User Manual
iv
Applicable Models
This manual is applicable to DS-PEA series panic alarm station.
Product
Model
Panic Alarm Station
DS-PEA1-N1, DS-PEA1-N2
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Safety Instruction
The device should be used in compliance with local laws and electrical safety regulations. Refer to the
appropriate documentation for detailed information.
The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the
Limited Power Source (24 VAC/12 VDC). Refer to the appropriate documentation for detailed
information.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused
by overload.
Make sure the plug is properly connected to the power socket.
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power
cable, and contact the service center.
Do not drop the device or subject it to physical shock.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
Do not aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam,
or it may burn out.
Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty, or damp
environments, the appropriate temperature is -40℃ to 60℃.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.

Panic Alarm Station with Covert Camera User Manual
v
Place the device in a dry and well-ventilated environment.
Keep non-waterproof devices away from liquids.
Keep the device in original or similar packaging while transporting it.
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Improper use or replacement of the battery may result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries in conformance with the instructions provided by the
battery manufacturer.
Never attempt to disassemble the device.

Panic Alarm Station with Covert Camera User Manual
vi
Table of Content
Chapter 1 Overview .............................................................................................................................................................. 1
Description....................................................................................................................................................................... 1
Key Features .................................................................................................................................................................... 1
Chapter 2 Appearance .......................................................................................................................................................... 2
Panic Alarm Station without Help Buttonn ...................................................................................................................... 2
Panic Alarm Station with Help Button.............................................................................................................................. 3
Chapter 3 Installation and Wiring.......................................................................................................................................... 4
Typical Application ........................................................................................................................................................... 4
Wiring Description ........................................................................................................................................................... 5
Network Wiring..................................................................................................................................................... 6
Alarm Output Wiring ............................................................................................................................................ 6
Alarm Input Wiring (Normally Open).................................................................................................................... 7
Power Supply Wiring............................................................................................................................................. 8
Installation ....................................................................................................................................................................... 9
Installation Description ......................................................................................................................................... 9
Chapter 4 Device Remote Operation ................................................................................................................................... 10
Activation via SADP Tool ................................................................................................................................................ 10
Remote Operation via Client Software .......................................................................................................................... 11
Activation via Client Software ............................................................................................................................. 11
Add a Device ....................................................................................................................................................... 13
Zone Settings ...................................................................................................................................................... 14
Zone Event Settings............................................................................................................................................. 16
Alarm Pop-up Window Settings .......................................................................................................................... 17
Broadcast Settings ......................................................................................................................................................... 18
Chapter 5 Remote Operation via iVMS-4200 ....................................................................................................................... 19
System Information Settings.......................................................................................................................................... 19
General Settings.................................................................................................................................................. 19
Timing Settings.................................................................................................................................................... 20
System Maintenance........................................................................................................................................... 21
Log Searching...................................................................................................................................................... 22
User Settings ....................................................................................................................................................... 23
Password Management ...................................................................................................................................... 25
Network Settings ........................................................................................................................................................... 25
General Network Parameters Settings................................................................................................................ 25
Network Center Settings..................................................................................................................................... 26
Call Center Settings............................................................................................................................................. 27
Advanced Network Parameters Settings............................................................................................................. 28
CMS Settings ....................................................................................................................................................... 29
Sip Settings.......................................................................................................................................................... 30
Storage Settings ............................................................................................................................................................. 31
HDD Information `............................................................................................................................................... 31
File Query............................................................................................................................................................ 32
Alarm Settings................................................................................................................................................................ 33
Zone Settings ...................................................................................................................................................... 33
Trigger Settings ................................................................................................................................................... 35
Calling Waiting Settings....................................................................................................................................... 35
Alarm Lamp Settings ........................................................................................................................................... 36
Voice Prompt Settings......................................................................................................................................... 37
Image Settings ............................................................................................................................................................... 37
Video& Audio Settings ........................................................................................................................................ 37
OSD Settings........................................................................................................................................................ 38
Image Settings..................................................................................................................................................... 39
Event Settings ................................................................................................................................................................ 40
Schedule Settings................................................................................................................................................ 40
Camera Parameter Settings ........................................................................................................................................... 42
Video Parameter Settings ................................................................................................................................... 42
WDR Settings ...................................................................................................................................................... 43
Audio Detection............................................................................................................................................................. 43

Panic Alarm Station with Covert Camera User Manual
1
Chapter 1 Overview
Description
This series of panic alarm station with covert camera supports two-way audio communication. It is
equipped with a 2MP built-in covert camera. The device with help button or without help button
can be selected. It implements cascading communication via network cable wiring.
Key Features
Network, video and audio adaptive
Voice intercom, alarm video storage, video download and playback
Two RJ45 network interfaces, supports cascading communication
Video compression: H.264
Audio compression: G.711 and G726
Audio detection
Built-in 2MP 1080P IR HD wide angle camera; supports capture, record, and live view
Built-in high sensitivity microphone
Full-band speakers and pickups supports anti-breaking sound technology
Multiple network protocols: TCP/IP, SNMP, RTSP and SADP
Anti-electromagnetic interference, tamper-proof, explosion-proof, and anti-lightning

Panic Alarm Station with Covert Camera User Manual
2
Chapter 2 Appearance
There are two types of the panic alarm stations: Panic alarm station without Help button and panic
alarm station with Help button.
Panic Alarm Station without Help Buttonn
Panic Alarm Station without Help Button
Components Description
No.
Description
No.
Description
1
IR Light
4
Panic Button
2
Covert Camera
5
Microphone
3
Loudspeaker

Panic Alarm Station with Covert Camera User Manual
3
Panic Alarm Station with Help Button
Panic Alarm Station with Help Button
Components Description
No.
Description
No.
Description
1
IR Light
4
Panic Button
2
Covert Camera
5
Help Button
3
Loudspeaker
6
Microphone

Panic Alarm Station with Covert Camera User Manual
4
Chapter 3 Installation and Wiring
Typical Application
The series of panic alarm station supports cascading communication via network cable wiring. The
typical application of the system is shown in the following picture.
Typical Application

Panic Alarm Station with Covert Camera User Manual
5
Wiring Description
Take the panic alarm station with help button as an example, the main board description is shown
in Figure 3-2.
Tampering Switch
Micro SD Card Slot
Network In Interface
Panic button Terminal
Help Button Terminal
Audio Output Terminal
Microphone
Network Out Interface
+12V
G
485-
COM
NO/NC
Z1
Z2
G
G
+12V
G
485+
Mainboard of Alarm Station

Panic Alarm Station with Covert Camera User Manual
6
Network Wiring
Network
Out
Interface
Mainboard Mainboard
Network
In
Interface
Network
Out
Interface
Network
In
Interface
Network Wiring
Alarm Output Wiring
+ -
Alarm Senor
+12V
G
Alarm Output Wiring

Panic Alarm Station with Covert Camera User Manual
7
Alarm Input Wiring (Normally Open)
COM
NO/NC
Z1
Z2
G
G
+12V
G
Detector
Normal
Open
NO
C
Alarm Input Wiring (NO)

Panic Alarm Station with Covert Camera User Manual
8
Power Supply Wiring
Power interface
Network
Out
Interface
Power Adapter
Mainboard
Network
In
Interface
Power Supply Wiring
The standard of power supply should be 12 VDC/2A.

Panic Alarm Station with Covert Camera User Manual
9
Installation
Installation Description
Please check whether there are all relevant accessories in the package before installation.
The installation of the alarm station requires 86 gang box. (Gang box is optional.)
Make sure the power supply is appropriated (12VDC).
Make sure the device is powered off before installation..
Drill a hole in the wall, and fix the gang box in the wall. The size of the hole should be 76 mm
(width) × 76 mm (length) × 50 mm (depth).
Fix the rear panel of the alarm station to the gang box with two screws (supplied).
Route the cables and complete the wiring. Refer to 3.1 for wiring details.
Secure the panic alarm station to the rear panel with four screws (supplied).
Installation

Panic Alarm Station with Covert Camera User Manual
10
Chapter 4 Device Remote Operation
Purpose:
For the first time use of the device, you are required to activate the device and set the activation
password. You can activate the device with SADP Tool, or with iVMS-4200 client software.
The default values of alarm station are as follows.
The default IP address: 192.0.0.65.
The default port No.: 8000.
The default username (administrator): admin.
Activation via SADP Tool
Run the SADP software to search the online devices.
Check the device status from the device list, and select an inactive device.
Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
Click OK to save the password.
You can check whether the activation is completed on the popup window. If activation failed,
please make sure that the password meets the requirement and then try again.

Panic Alarm Station with Covert Camera User Manual
11
Change the device IP address to the same subnet with your computer by either modifying
the IP address manually or checking the checkbox of Enable DHCP.
Input the password and click the Modify button to activate your IP address modification.
Remote Operation via Client Software
Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software
according to the prompts. Follow the steps to activate the control panel.
Run the client software and the control panel of the software pops up, as shown in the figure
below.
Click the Device Management icon to enter the Device Management interface, as shown in
the figure below.
Click Add Device Type to enter the adding device type page.
Select Security Control Panel.

Panic Alarm Station with Covert Camera User Manual
12
Click Security Control Panel in the Organization list.
Check the device status from the device list, and select an inactive device.
Click the Activate button to pop up the Activation interface.
Create a password and input the password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in
order to increase the security of your product. And we recommend you reset your password regularly, especially in the
high security system, resetting the password monthly or weekly can better protect your product.
Click OK button to start activation.
Click the Modify Netinfo button to pop up the Network Parameter Modification interface, as
shown in the figure below.

Panic Alarm Station with Covert Camera User Manual
13
Change the device IP address to the same subnet with your computer by either modifying
the IP address manually or checking the checkbox of Enable DHCP.
Input the password to activate your IP address modification.
Add a Device
Click the icon on the control panel to enter the Device Management interface and
click the Server tab.
Click Add New Device Type on the Organization list and select Security Control Panel.
Click OK to save the settings, and the added security control panel type is displayed on the
Organization list.
Click Security Control Panel and click Add Device to add the device to the management list of
the software.

Panic Alarm Station with Covert Camera User Manual
14
You can add the active online devices in the same local subnet with the client software, or
select the adding mode by IP/Domain Name, by IP segment, by IP Server, or by HiDDNS, and
configure the corresponding settings for the device. Take IP/Domain Name as an example.
Input the required information.
Nickname: Edit a name for the device as you want.
Address: Input the device’s IP address or domain name.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name.
Password: Input the device password.
Optionally, you can check the checkbox Export to Group to create a group by the device
name. All channels and alarm inputs of the device will be imported to the corresponding
group by default.
Click Add to add the device.
Zone Settings
Click Device Management > Security Control Panel > Remote Configuration > Alarm > Zone
to enter the Zone configuration interface.
In the Alarm Input list, select an alarm input channel and click the icon to enter the zone
settings interface.