Hoist Fitness ROC-IT RPL-5303-A User manual

Fax
FaxFax
Fax
[phone]
[phone](858) 578-7676
[phone]
[phone]
[phone](858) 578-9558
[phone]
Customer Service
Customer ServiceCustomer Service
Customer Service
[phone]
[phone](800) 548-5438
[phone]
RECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERERECORD SER AL NUMBER HERE
RECORD SER AL NUMBER HERE
MACH NE CODE
MACH NE CODEMACH NE CODE
MACH NE CODE
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR USING MINIMUM 4-1/2" LONG BOLTS. FAILURE
TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
OWNER'S MANUAL
OWNER'S MANUAL OWNER'S MANUAL
OWNER'S MANUAL
Note: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering PartsNote: Both Serial Number and Model Number are Required when Ordering Parts
Note: Both Serial Number and Model Number are Required when Ordering Parts
A09
A09A09
A09
RPL-5303-A
PLATE-LOADED INCLINE CHEST PRESS

02
04
24
26
27
28
31
34
35
36
38
39
40
41
42
EXERCISE LOG......................................................................
OWNER'S MANUAL
PAGE 01 RPL-5303-A ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
MACHINE ADJUSTMENT......................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
CONTENTS

OWNER'S MANUAL
PAGE 02
RPL-5303-A ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
OWNER'S MANUAL
PAGE 03 RPL-5303-A ASSEMBLY

OWNER'S MANUAL
PAGE 04
RPL-5303-A ASSEMBLY
FRAME ASSEMBLY

NOTE:
FRAME ASSEMBLY
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
PAGE 05
OWNER'S MANUAL
RPL-5303-A ASSEMBLY
10
82
65
65
91
57
18
28
14
11
58

64
78
64
12
56
20
12
56
78
64
90
64
90
67
113
112
64
67
114
113
112
64
114
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
RPL-5303-A ASSEMBLY
OWNER'S MANUAL
PAGE 06

90
80
64
17
18
64 37
70
20
- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
PAGE 07
OWNER'S MANUAL
RPL-5303-A ASSEMBLY

- HAND TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
RPL-5303-A ASSEMBLY PAGE 08
85
65
91
43
85
65
91
65
14
11
23
18
65

- WRENCH TIGHTEN HARDWARE.
HAND-TIGHTENED HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
FRAME ASSEMBLY
NOTE:
PAGE 09
OWNER'S MANUAL
RPL-5303-A ASSEMBLY
91
65
65
65
88
14
11
91
84
65
23
53

76
76
64
7
76
64
9
64
90
64
90
90
64
64
19
- REPEAT ASSEMBLY FOR OPPOSITE SIDE
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
OWNER'S MANUAL
RPL-5303-A ASSEMBLY PAGE 10

NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 11 RPL-5303-A ASSEMBLY
91
89
65
65
18
19

FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
OWNER'S MANUAL
RPL-5303-A ASSEMBLY PAGE 12
13
19
91
65
91
65
13
65
87
65
87
20

- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
NOTE:
FRAME ASSEMBLY
PAGE 13
OWNER'S MANUAL
RPL-5303-A ASSEMBLY
22
91
47
23
21

1
85 3/4" 2178
PROPERLY INSTALLED VIEW
NOTE:
BE SURE CABLE (1) RUNS
BETWEEN PULLEYS (40) &
GUARD PINS AS SHOWN.
106
JAM NUT
15
CABLE BOLT
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLE (1) & PULLEYS (40) AT
THE SAME TIME.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
OWNER'S MANUAL
RPL-5303-A ASSEMBLY PAGE 14
90
22
1
64
40
81
21
64
40
1
BOLT IN/OUT TO GIVE THE CABLE
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
PROPER TENSION. RE-TIGHTEN
JAM NUT.
SECURELY TO ENSURE PROPER CONNECTION.
FINE TUNING:
LOOSEN JAM NUT AND THREAD
WARNING - CABLE BOLT MUST BE THREADED

NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 15 RPL-5303-A ASSEMBLY
83
106
83
106
65
21
5
65
22

61
14
46
79
67
64
79
67
64 11
67
111
112
64
114
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
NOTE:
RPL-5303-A ASSEMBLY
OWNER'S MANUAL
PAGE 16

NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
PAGE 17
OWNER'S MANUAL
RPL-5303-A ASSEMBLY
16
4
74
63
107

- WRENCH TIGHTEN HARDWARE.
NOTE:
FRAME ASSEMBLY
OWNER'S MANUAL
RPL-5303-A ASSEMBLY PAGE 18
19
8
MAKE SURE THE ORIENTATION
OF PULL-PIN (8) IS AS SHOWN.
75
16
19
8

41
2
52
63
73
107
REMOVED FOR CLARITY.
- SOME PARTS MAY HAVE BEEN
NOTE:
- WRENCH TIGHTEN HARDWARE.
FRAME ASSEMBLY
OWNER'S MANUAL
PAGE 19 RPL-5303-A ASSEMBLY