IBASE Technology SI-304 User manual

SI-304 User Manual
SI-304
User Manual

ii
SI-304 User Manual
Revision
Release Date
V1.0
2015/07/30

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
iii
IBASE Technology Inc.
Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, maybe
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of IBASE
Technology INC. (“IBASE ”).
Products and corporate names mentioned in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used for
identification purposes only. All trademarks are the property of their respective
owners.
Every effort has been made to ensure that the contents of this manual are correct
and up to date. However, the manufacturer makes no guarantee regarding the
accuracy of its contents, and reserves the right to make changes without prior notice.

iv
SI-304 User Manual
Table of Contents
Setting up your system..........................................................................................................v
Care during use .....................................................................................................................vi
Acknowledgments................................................................................................................vii
CHAPTER 1 INTRODUCTION.................................................................................... 1
1.1 General Description..........................................................................................................1
1.2 System Specifications......................................................................................................2
1.2.1 Hardware Specifications...............................................................................................2
1.2.2 Dimensions ....................................................................................................................3
1.2.3 I/O View...........................................................................................................................4
1.3 Exploded View of the SI-304 Assembly ..........................................................................4
1.3.1 Parts Description...........................................................................................................5
1.4 Packing List ......................................................................................................................6
1.4.1 Optional Items module..................................................................................................6
1.5 Hardware Installation .......................................................................................................7
1.5.1 Mounting Installation.....................................................................................................7
CHAPTER 2 MOTHERBOARD INTRODUCTION.......................................................... 8
2.1 Introduction.......................................................................................................................8
2.2 Installations.....................................................................................................................10
2.2.1 Installing the Memory..................................................................................................10
2.3 Setting the Jumpers .......................................................................................................11
CHAPTER 3 BIOS SETUP .........................................................................................14
3.1 BIOS Introduction...........................................................................................................14
3.2 BIOS Setup......................................................................................................................14
CHAPTER 4 DRIVERS INSTALLATION .......................................................................33
4.1 VGADrivers Installation.................................................................................................33
7. Click Accept to accept the End User License Agreement.............................................36
4.2 Audio Drivers Installation ..............................................................................................37
4.3 LAN Drivers Installation.................................................................................................38
Appendix...............................................................................................................39
A. ATI Eyefinitity setting.......................................................................................................39
C. Interrupt Request Lines (IRQ).........................................................................................47
D. Watchdog Timer Configuration.......................................................................................48

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
v
IBASE Technology Inc.
Safety Information
Your SI-304 is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important that
you read the following safety instructions
Setting up your system
Read and follow all instructions in the documentation before you operate your
system.
Do not use this product near water.
Set up the system on a stable surface. Do not secure the system on any
unstable plane.
Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
Slots and openings on the chassis are for ventilation. Do not block or cover
these openings. Makesure you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
This system should be operated from the type ofpower indicated on the
marking label. If you are not sure of the type of power available, consult your
dealer or local power company.
Use this product in environments with ambient temperatures between -10˚C and
60˚C.
If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere rating.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENTWHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20°C (-4°F) OR ABOVE 80°C
(167°F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.

vi
SI-304 User Manual
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still flows.
Always unplug all power, and network cables from the power outlets before
cleaning the system.
If you encounter the following technical problems with the product, unplug the
power cord and contact a qualified service technician or your retailer.
The power cord or plug is damaged.
Liquid has been spilled into the system.
The system does not function properly even if you follow the operating
instructions.
The system was dropped or the cabinet is damaged.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by themanufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
NO DISASSEMBLY
The warranty does not apply to the products that have been disassembled by users
WARNING
HAZARDOUS MOVING PARTS
KEEP FINGERS AND OTHER BODY PARTS AWAY

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
vii
IBASE Technology Inc.
Acknowledgments
AMI is a registered trademark of AMI Software International, Inc.
AMD and ATI are registered trademarks of AMD Corporation.
Intel, Pentium, and Intel Core are registered trademarks or trademarks of
Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft Corporation.
FINTEK is a registered trademark of FINTEK Electronics Corporation.
REALTEK is a registered trademark of REALTEK Electronics
Corporation.
All other product names or trademarks are properties of their respective
owners.

1
SI-304 User Manual
CHAPTER 1 INTRODUCTION
1.1 General Description
The “Signature Book™” SI-304 is a professional digital signage system powered
by 2nd Gen AMD Embedded R-series APU-based Signage Player with RadeonTM HD
9000 series graphics. The SI-304 integrates 4 HDMI ports with EDID emulation
function. Additionally, SI-304 has two dual-channel DDR3-2133 sockets to provide up
to 32GB of memory. It also has dual Gigabit Ethernet, one mSATA and NGFF drive
and IBASE’s iSMART green technology for power on/off scheduling and power resume
functions. The ruggedized design player’s chassis provides passive cooling for better
system reliability and quiet operation.
SI-304 overview
** The integrated four HDMI interface has built-in EDID emulation function. To use
the EDID function, turn off the power first. Then, connect the new display port. After
you turn on the power, SI-304 will detect new EDID data.

2
SI-304 User Manual
1.2 System Specifications
1.2.1 Hardware Specifications
Model Name
SI-304
System Mainboard
MBD304
CPU
2nd Gen. R-series QC RX-427BB 2.7/3.4G
DC RX-225BB 2.2/3.0G APU
Memory
2x DDR3 2133 SO-DIMM, dual channel, Max. 32GB
I/O Interface
4x HDMI
2x USB 3.0 ports
1x USB 2.0 port
2x RJ45 for LAN
1x RJ45 for RS232
1x Microjack audio connector for Line-in
Power LED / HDD LED, power on/off button
1x DC power jack
Storage
1x mSATA
1x NGFF M key 22 x 80mm(2280)
Expansion Slots
2x mPCIe(x1) for WiFi + Bluetooth, 3G, GPS and TV tuner options
1x UIM/SIM card slot (for 3G/LTE adaptor in mPCIe slot)
Construction
Aluminum + SGCC
Mounting
Slim design with wall mounting holes
Dimensions
269mm(W) x 193mm(D) x 29.5mm(H)
10.59”(W) x 7.6”(D) x 1.16”(H)
Operating
Temperature
0°C~ 45°C (32°F~113°F)
Storage
Temperature
-20°C ~ 80°C (-4°F~176°F)
Relative Humidity
5~90% @ 45°C, (non-condensing)
Vibration
SSD: 5 grms / 5~500Hz / random operation
HDD: 0.25 grms / 5~500Hz / random operation
RoHS
Available
Certification
CE, FCC, CCC, UL
‧ This specification is subject to change without prior notice.

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
3
IBASE Technology Inc.
1.2.2 Dimensions

4
SI-304 User Manual
1.2.3 I/O View
SI-304 front side
1.3 Exploded View of the SI-304 Assembly

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
5
IBASE Technology Inc.
1.3.1 Parts Description
Part No.
Description
Part No.
Description
1
SI-304 Main Board
2
Thermal Module
3
System Fan
4
M.2 Module
5
Mini PCI-E
6
RAM
7
Die Casting-Case
8
Cover
9
I/O Plate
10
M.2 Bracket
11
Mounting Screw

6
SI-304 User Manual
1.4 Packing List
Item No.
Description
Qty
1
Driver CD
1
2
Power adaptor
1
3
Power cord
1
1.4.1 Optional Items module
WiFi Solution
Description
WiFi module
Wireless; PCI-E Mini Card 802.11B/G/N [AW-NE238H]
(A008WLAWNE238H000P)
External Antenna,
2pcs
WiFi Antenna (A055RFA02C2M20800P)
Internal cable, 2pcs
Internal Antenna 100mm [BTC130-1-70B-100] RoHS
(A055RFA0000021000P)
Screw, 2pcs
Screw; A44-N NI 3.4 NYLOK M2*L3.8 P0.4mm [LHS]
RoHS (H02203A0442200N00P)
Bracket, 1 set
Component BOM; MPCIE-EXT V-B2 Bracket
(SC2MPCIEEXT0B2100P)
3G Solution
Description
3G
Wireless; 3.75G UMTS/HSPA [ZU202] RoHS
(A008WIRELESS00520P)
3G+GPS
Wireless; 3.75G UMTS/HSPA & GPS Module
[ZU200] RoHS (A008WIRELESS00510P)
WW-350U
Wireless; 3.75G UMTS/HSPA [NAVISYS WW-350U]
RoHS (A008WIRELESS00530P)
Cable
Cable; SMA IPX Cable For 3G 30CM [RF11030A]
RoHS (A012INTENAL010000P)
Antenna
3G [ANT0921Q2P] RoHS (A055ANT0921Q2P000P)
COM Port Cable
Description
EXT-311
Cable; EXT-311 2-HD 10C 150CM; DSUB-9F =>
RJ45-10M RoHS (C501EXT3110A12000P)
EXT-312
Cable; EXT-312 2-HD 10C 150CM; DSUB-9M =>
RJ45-10M RoHS (C501EXT3120A12000P)

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
7
IBASE Technology Inc.
1.5 Hardware Installation
1.5.1 Mounting Installation
1. Please install SI-304 to the intended location using 4x M4*0.7*6L screws, as
shown in the picture.

8
SI-304 User Manual
CHAPTER 2 MOTHERBOARD INTRODUCTION
2.1 Introduction
MBD304 Jumpers and Connectors

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
9
IBASE Technology Inc.
MBD304 Board Dimensions

10
SI-304 User Manual
2.2 Installations
2.2.1 Installing the Memory
The MBD304 board supports four DDR3 memory modules for a maximum total of
32GB in DDR3 SODIMMmemory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and perform the
following steps:
1.Hold the DDR3 module so that the key of the DDR3 module aligned with that on
the memory slot.
2.Gently push the DDR3 module in an upright position until the clips of the slot close
to hold the DDR3 module in place when the DDR3 module touches the bottom of
the slot.
3.To remove the DDR3 module, press the clips with both hands.

Copyright © 2013 IBASE Technology Inc. All Rights
Reserved.
11
IBASE Technology Inc.
2.3 Setting the Jumpers
Jumpers are used on MBD304 to select various settings and features according to
your needs and applications. Contact your supplier if you have doubts about the best
configuration for your needs. The following lists the jumpers and connectors on
MBD304 and their respective functions.
JP3, JP4: COM1/COM2 RS232 RI/+5V/+12V Power Setting
JP4/JP5
Setting
Function
Pin 1-3
Short/Closed
+12V
Pin 3-4
Short/Closed
RI
Pin 3-5
Short/Closed
+5V
J2: Clear CMOS Setting
J2
Function
Normal
Clear CMOS
CN1: DC_IN Connector (+12V Adaptor 4 Pin)
Pin #
Signal Name
1
+12V
2
+12V
3
GND
4
GND
5
GND

12
SI-304 User Manual
J1: Memory Voltage Setting
J1
Function
1.5V
1.35V
COM1: COM1 Connector
COM1
Pin #
Signal Name
1
DSR, Data set ready
2
GND, ground
3
GND, ground
4
TXD, Transmit data
5
RXD, Receive data
6
DCD, Data carrier detect
7
DTR, Data terminal ready
8
CTS, Clear to send
9
RTS, Request to send
10
RI, Ring indicator
COM2: COM2 Connector
Signal Name
Pin #
Pin #
Signal Name
Data carrier detect
1
2
Data set ready
Receive data
3
4
Request to send
Transmit data
5
6
Clear to send
Data terminal
ready
7
8
Ring indicator
Ground
9
10
No connect.