iDataLink maestro Rr User manual

OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE
ADS-RR(SR)-TOY01-DS
PRODUCTS REQUIRED
•iDatalink Maestro RR Radio Replacement Interface
•TO1 Installation Harness
TO1 & JVC RADIO
OWNER'S GUIDE
RETAINS STEERING WHEEL CONTROLS,
FACTORY SETTINGS AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here
in are the properties of their respective owners.

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 2 JVCRRSRTOY01DSOGEN
TABLE OF CONTENTS
WELCOME
NEED HELP?
Congratulations on the purchase
of your iDatalink Maestro RR Radio
replacement solution. You are
now a few simple steps away from
enjoying your new car radio with
enhanced features.
This guide is a great addition to both
the vehicle owner’s guide and the
aftermarket radio owner’s guide.
We recommand having both these
documents handy as they cover all
the functionality that the Maestro
RR retains.
Please note that all the retained
functionalities must be initially
available in the vehicle.
1 866 427-2999
[email protected]
maestro.idatalink.com/support
www.12voltdata.com/forum
USING YOUR STEERING WHEEL CONTROLS
SEE YOUR QUICK REFERENCE CARD 3
USING YOUR FACTORY SYSTEMS
OEM SATELLITE RADIO 4
OEM USB 4
USING MAESTRO FEATURE
VEHICLE INFO 5
Access and Display Vehicle Info Screen 5
Access and Change Vehicle Info Settings 5
•Set Tire Location 5
•Check Engine Alert 5
•Door Alert 6
•TPMS Alert 6
GAUGES 7
Access and Display Gauges Screen 7
Access and Change Gauges Settings 7
•Select Gauges 7
•Center Gauge Warning Text 7
•Fuel Economy 7
•Validate PIDs 8
•About Gauges 8
•OBD2 Communication 8
PARKING ASSIST 9
Access and Display Parking Assist Screen 9
Access and Change Parking Assist Settings 9
CHANGING OTHER SETTINGS
VEHICLE FACTORY SETTINGS 10
Access and Change Vehicle Factory Settings 10
•Vehicle Amplifier 10
MAESTRO FEATURES SETTINGS 10
Access and Change Maestro Settings 10
•Module Audio Gain 10
•Module Master Reset 10
•Accessory During Crank 10

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 3 JVCRRSRTOY01DSOGEN
USIING YOUR STEERING WHEEL CONTROLS
USING YOUR
STEERING WHEEL
CONTROLS (If equipped)
Your steering wheel buttons can be used to control your aftermarket JVC radio. You can
assign steering wheel buttons to JVC radio functions. Simply program your Maestro RR
module online using the Weblink updater and customize your buttons. Each steering
wheel button can control up to two radio features.
SEE YOUR QUICK REFERENCE CARD
A quick reference card showing your steering wheel configuration can be printed on the
Maestro website during the flashing process. If you had your product installed professionally,
ask your installer to print this card for you during installation.

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 4 JVCRRSRTOY01DSOGEN
USING YOUR FACTORY SYSTEMS
USING YOUR
FACTORY
SYSTEMS
The following section explains how to access and operate the factory systems that have
been retained. Your vehicle must already be equipped with these systems.
OEM SATELLITE RADIO
Press on Satellite Radio to listen to the factory satellite radio tuner. This allows you to use the
tuner that’s already in your vehicle, rather than installing an aftermarket tuner. Your vehicle
must be equipped with a tuner for it be retained by the Maestro RR module.
Satellite Radio must be selected during the Maestro RR online programming with the Weblink
Updater. A subscription is required to receive satellite radio services. If your tuner needs to be
activated, tune to channel 0 to see your radio ESN which is required for an activation.
OEM USB
Press on USB/iPod to access the factory USB. Your vehicle must be equipped with a USB port
for it to be retained by the Maestro RR module.
HOW TO GET THERE:

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 5 JVCRRSRTOY01DSOGEN
USING MAESTRO FEATURES - VEHICLE INFO
USING MAESTRO
FEATURES 
VEHICLE INFO
HOW TO GET THERE:
VEHICLE INFO
Access And Display Vehicle Info Screen
In the My Vehicle submenu, press on Vehicle
Info to display information about the vehicle
such as tire pressure, battery voltage and open
entry points. If your vehicle is equipped
with a compatible tire pressure monitoring
system (TPMS), the digital tire pressures will
be displayed for each tire. Should your check
engine light come on, the CHECK ENGINE
button will become active and you will be able to press this button to see the active trouble
codes and attempt to reset them.
Access And Change Vehicle Info Settings
Access the Maestro settings to configure the alerts that can be generated. These alerts will
cause the Vehicle Info screen to come up when certain conditions occur.
•Set Tire Location
Toyota vehicles do not have a pre-assigned designation for the location of each tire on the
vehicle. As an example, the tire pressure for the front left tire may display in the right rear
position. To correct this, the Maestro module allows you to set the tire location in the vehicle
info settings menu. Select the “Set Tire Location” menu option, then follow the on-screen
instructions. For this procedure, you will be required to defl ate each tire slightly.
NOTES: The tire pressures rely on proper programming by the technician when tires are changed or rotated. If your tires have been rotated but
not reprogrammed, the tire locations on this screen may be incorrect.
•Check Engine Alert
Enables the Vehicle Info screen to be displayed automatically when the check engine light
turns on in the vehicle. The diagnostic codes can be read and cleared.
Warning: If the check engine light turns on after clearing the trouble code, it may indicate serious problems with the engine. Have the vehicle
serviced by a qualified technician.

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 6 JVCRRSRTOY01DSOGEN
USING MAESTRO FEATURES - VEHICLE INFO
USING MAESTRO
FEATURES 
VEHICLE INFO
•Door Alert
Enables the Vehicle Info screen to be displayed automatically if a door is opened or left open
when the vehicle speed exceeds 5 mph or 8 km/h.
•TPMS Alert
Enables the Vehicle Info screen to be displayed automatically when a TPMS fault is detected
(only if TPMS is available in the vehicle and supported by Maestro).

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 7 JVCRRSRTOY01DSOGEN
USING MAESTRO FEATURES - GAUGES
USING MAESTRO
FEATURES 
GAUGES
HOW TO GET THERE:
GAUGES
Access And Display Gauges Screen
In the Vehicle Car submenu, press on Gauges
to view the gauges that are selected. During
the installation, the default gauge choices will
be displayed. When the Maestro RR module is
installed, the vehicle is queried and the gauges
that can be supported are enabled.
Access And Change Gauges Settings
•Select Gauges
When choosing a new gauge from the list, the supported gauges will be displayed in white
text and the non-supported gauges will be displayed in gray text. If a gauge is displayed in
gray text with a number next to it, the gauge is supported and is already assigned to another
gauge on the screen. Some gauges have options that can be set. You will see these appear
when you select a gauge that has options. In order to use some of the fuel economy gauges,
you will need to enter your fuel tank capacity. This information can usually be found in your
vehicle owner’s guide.
•Center Gauge Warning Text
Allows the choice of displaying text when the center gauge reaches its peak.
•Fuel Economy
For accurate fuel economy information, the fuel tank capacity must be entered in this
section of the settings menu.

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 8 JVCRRSRTOY01DSOGEN
USING MAESTRO FEATURES - GAUGES
USING MAESTRO
FEATURES 
GAUGES
•Validate PIDs (Parameter Identifiers)
Accesses the factory system to determine which gauges can be supported. This is done
automatically when the module powers up. It is only required to be done manually if the
module has been re-flashed.
•About Gauges
This screen will display a pop-up with information about the gauges.
•OBD2 Communication
Auto Disable (default)
The module will communicate with the vehicle’s OBD2 system unless it detects another
device. This may be a scan tool or aftermarket programmer connected to the vehicle.
Always Enabled
The module will communicate with the vehicle’s OBD2 system even when a scan tool
or aftermarket programmer is connected. However, some scan tools and aftermarket
programmers will not function when this option is enabled.
Disabled
The module will not communicate with the vehicle’s OBD2 system. This option applies when
using a scan tool or aftermarket programmer that does not allow multiple connections at
the same time.
Enabled on Demand
The module will only communicate with the vehicle’s OBD2 system when the vehicle info
or gauges screen is displayed. This is used in vehicles that issue a periodic vehicle health
report through a factory system such as Sync or OnStar. However, applying this setting may
cause the fuel economy calculations to be inaccurate.

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 9 JVCRRSRTOY01DSOGEN
USING MAESTRO FEATURES - PARKING ASSIST
USING MAESTRO
FEATURES 
PARKING
ASSIST
HOW TO GET THERE:
PARKING ASSIST
Access And Display Vehicle Info Screen
In the My Vehicle submenu, press on Parking
Assist to see the visual parking assist screen.
This option will only be available if the Maestro
detects that your vehicle is equipped a
compatible factory parking sensor system.
Access And Change Parking Assist Settings
When parking assist interrupt is set to ON, the
Maestro parking assist screen will pop up when
the vehicle is in reverse. If the vehicle is also
equipped with a backup camera, there is also a
reverse interrupt setting for it in the radio. Only
one feature’s reverse interrupt should be set to
ON, or there will be a conflict in the radio.
You can change the units of length from feet to meters.

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016 10 JVCRRSRTOY01DSOGEN
CHANGING OTHER SETTINGS
CHANGING
OTHER
SETTINGS
HOW TO GET THERE:
VEHICLE FACTORY SETTINGS
Access And Change Vehicle factory Settings
There are several programmable options
that affect the way that the Maestro interface
works with your vehicle. These settings enable
you to customize the features of your vehicle.
Not all settings are described here, as they are
vehicle specific.
• Vehicle Amplifier
To adjust the settings of your factory amplifier, press on Vehicle Amplifier. This setting will
only appear if your Maestro RR module detects a compatible amplifier in your vehicle. This
feature must be retained during the Maestro RR online programming with the Weblink
Updater.
The Gain setting will change the gain of the factory amplifier. The Amplifier Retention setting
is used to tell the Maestro module if you are using (retaining) the factory amplifier or if you
have bypassed it.
MAESTRO FEATURES SETTINGS
Access And Change Maestro Features
• Module Audio Gain
Used to adjust the audio gain of the Maestro
module. All audio that passes from the factory
systems into the Maestro will be affected by
this setting.
•Module Master Reset
Used to reset the Maestro module.
•Accessory During Crank
If this setting is turned on, the radio will stay
powered while the engine is started. If this
setting is turned off, the accessory circuit
will drop out while the engine cranks, like a
normal accessory circuit.