IHP FP4125-BDVI32 User manual

1
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
FULL FRONT FACADE KITS
MODELS BELLEVUE™ AND DRI2032
INSTALLATION INSTRUCTIONS FOR INSTALLING FULL FRONT FACADE KITS.
FOR USE WITH BELLEVUE™ AND DRI2032 GAS FIREPLACE INSERTS
P/N 900787-07
REV. A, 10/2016
HEARTH PRODUCTS
KITS AND ACCESSORIES
KIT CONTENTS (See Figure 1)
1 ea. Full Front Facade Assembly
1 ea. Black Sheet Metal Screw
1 ea. Instruction Sheet
TOOLS NEEDED
Phillips Screwdriver
GENERAL INFORMATION
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installation.
All of these parts may scratch and bend, great care should be used
in handling them.
ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND
OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO
THESE INSTRUCTIONS.
TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL
BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS
1. Position the appliance in the fireplace, but a few inches in front of its
final location.
2. Using the screw provided, install the Control Assembly onto the left
side of the Full Front Facade (see Figure 1).
3. Hang the hooked brackets on the Full Front Facade into the openings
on the side mounting brackets on the appliance (see Figure 2).
NOTE: See Figure 3 on Page 2 for an illustration of the completed
installation.
Full Front Facade Kits
Cat. No. Model Description
F3133 FP4125-BDVI32 3 Sided Full Front Facade, 41" W x 25" H
F3134 FP4332-BDVI32 3 Sided Full Front Facade, 43" x 32"
Install Screw Control
Assembly
Control
Assembly
Figure 2 - Install Full Front Facade Onto Mounting Brackets
A = Openings where hooked brackets on Full Front Facade will hang.
B = Side Mounting Brackets on appliance
A
A
B
B
A
A
Figure 1 - Install Control Assembly onto Side of Full Front Facade
Full Front
Facade
fire-parts.com

2
Figure 3 - Completed Installation
Printed in U.S.A. © 2016 Innovative Hearth Products
P/N 900787-07 REV. A 10/2016
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.
1508 Elm Hill Pike, suite 108 • Nashville, TN 37210
IHP reserves the right to make changes at any time, without notice, in design, materials,
specifications, and prices, and also to discontinue colors, styles, and products.
Consult your local distributor for fireplace code information.
REFERENCE INFORMATION
Full Front Facade Kits (required accessory) *
Cat. No. Model Description
F3133 FP4125-BDVI32 3 Sided Full Front Facade, 41" x 25", Medium
F3134 FP4332-BDVI32 3 Sided Full Front Facade, 43" x 32", Large
43-1/4”
(1099 mm)
21-5/8”
(549 mm)
32”
(813 mm)
41”
(1041 mm)
20-1/2”
(521 mm)
25”
(635 m
m
FP4332-BDVI32
FP4125-BDVI32
Surround Kit*
Cat. No. Model Description
F2311 FP4638-4S-MPDVI32 4 Sided Surround, Trimmable, 46" W x
38" H
23”
(584 mm)
10-3/4”
(273 mm)
7”
(178 mm)
7-7/8”
(200 mm
46”
(1168 mm)
10-3/4”
(273 mm)
* The 4-Sided Surround is compatible for use with the medium size
(41" x 25") Full Front Facade but not the large size full front facade.
fire-parts.com