Ingenico PAYZONE iCT250 User manual

Thank you for choosing talech and Elavon.
This guide shows you how to set up and connect your iCT250 device to talech Register.
If you have any questions, contact talech support at [e-mail] or 888.995.1998.
Your iCT device supports the following payment methods:
***** *e.g. Apple Pay™
Chip & PIN Contactless
*Apple Pay™ is a registered trademark in the United States and other countries - 01 -
iCT250 Setup Guide
All manuals and user guides at all-guides.com
all-guides.com

Installation
Remove box contents
Insert paper roll and connect ethernet cable
1
2
iCT250 Terminal
Magic Box
Power Supply
Phone Cable
Paper Roll
Your iCT box should include:
Li flap on top of the terminal and
insert the paper roll.
Connect an ethernet cable from the
magic box to your router.
- 02 -
(side view)
All manuals and user guides at all-guides.com

iCT250 Configuration
1
3
2
4
Open “Admin Menu”.
Press the “#” button from the home screen
to enter the Admin Menu.
Select “Communications”.
Select “Setup Menu”.
To select an option press the green button
or corresponding # on the keypad.
Select “Ethernet”.
- 03 -
ADMIN MENU
ADMIN MENU COMMUNICATIONS
1 - Clerk Menu
2 - Batch Menu
3 - Setup Menu
4 - Maintenance
1 - Merchant
2 - Communications
3 - Receipts
4 - Trans Options
1 - ComsPriority
2 - Dial
3 - Ethernet
4 - RS232
All manuals and user guides at all-guides.com

iCT250 Configuration
7
5 6
Press yellow button to go back
to the home screen.
Select “Ethernet Setup”. Select “Dynamic IP”.
NOTE: Write down IP address displayed.
- 04 -
8Press the “#” button from the
keypad to enter the Admin Menu.
(Shown in Step 7)
ETHERNET MENU ETHERNET SETUP
1 - Current Setup
2 - Ethernet Setup
3 - Timers Setup
1 - Dynamic IP
2 - Static IP
ADMIN MENU
1 - Merchant
2 - Communications
3 - Receipts
4 - Trans Options
All manuals and user guides at all-guides.com

iCT250 Configuration
9 10
11 Select “Enable SemiInteg”.
Select “Misc. Options”. Select “Semi-Integrated”.
- 05 -
12 Select the “On” option.
NOTE: This enables semi-integration.
SEMI-INTEGRATED
ETHERNET MENU MISC. OPTIONS
1 - Enable SemiInteg
2 - Communication Type
3 - Receipts Options
6 - Security
7 - Terminal Info
8 - Host Managment
9 - Misc. Options
1 - Semi-Integrated
SEMI-INTEGRATED
Enable SemiIntegrated
On O
All manuals and user guides at all-guides.com

iCT250 Configuration
13
- 06 -
Press yellow button to go back
to the Semi-Integrated menu.
14
15
Select “Communication Type”.
Select “Ethernet”. 16 Enter 6556 as the
Communications Port.
ETHERNET MENU
192.168.2.2
Enter Terminal
Port
6556
SEMI-INTEGRATED
SEMI-INTEGRATED
1 - Enable SemiInteg
2 - Communication Type
3 - Receipts Options
1 - RS232
2 - USB
3 - Ethernet
All manuals and user guides at all-guides.com
all-guides.com

iCT250 Configuration
- 06 -
18
19
Select “Receipts Options”.
Select the “ECR” option.
SEMI-INTEGRATED
RECEIPT OPTIONS
1 - Enable SemiInteg
2 - Communication Type
3 - Receipts Options
1 - ECR
2 - Terminal
17 Press yellow button to go back
to the Semi-Integrated menu.
All manuals and user guides at all-guides.com

talech App Configuration
3
1
4
2
Select Card Reader.
(highlighted in light blue)
Open talech Register on your iPad.
Select iCT220 and iCT250.
- 07 -
Go to the setting menu.
All manuals and user guides at all-guides.com

talech App Configuration
56
Enter the IP address and port
address obtained by the terminal.
(highlighted in light blue)
- 08 -
Go back to talech Register.
Settings are now saved.
Your iCT terminal now is connected to talech Register
and ready to accept payments.
email: [e-mail] | phone: [phone]
Thank you again for choosing talech and Elavon to be part of your business experience.
If you have questions, please don’t hesitate to contact us. We are here 24/7.
All manuals and user guides at all-guides.com