Ingenico Lane 3000 User manual

What's in the box?
Quick Start Guide
Lane 3000
1.Card Terminal
2.Terminal Cable
3.Power Supply Unit
4.Window Decal
4

Function keys
Menu - Use this button to access the main
functions menu on the terminal
Cancel - Use this button to cancel and
revert back to the previous screen
Clear - Use this button to clear back or
delete characters when keying in
text/numbers
Enter - Use this button to confirm selection
on the terminal

Getting started
Connect the Terminal cable to the Lane 3000 Kiosk terminal by
connecting the HDMI end to the back of the terminal as shown.
When the terminal is configured, the Menu buttons are
disabled on the device.
To access the admin menu please follow these steps.
1. After reboot press the “F” key followed by “654123” and the
“F” key again.
Connect the Power supply to the Terminal cable, and connect
to an active Ethernet port. *Note the Ethernet extension block
and additional cable can be used to extend the cable if
required.
Setting a static IP address on the
terminal

2. The terminal will request an administrator password which is
123456 and ENTER You are now in the Admin Menu.
Using the Up/Down keys, select “ETH setting”, then press ENTER
Speed change appears on screen select Link Speed 100Mb/s and
press ENTER
Protocol Change will then appear on screen, press the RED button
(cancel)
You can now set the terminal to the desired IP address. Use the
Yellow button to clear the existing IP address, and key in the new IP
address you wish to use. Press ENTER button to save the changes.
The next screen will display the Subnet mask this should not be
changed press ENTER.
The final screen displays the gateway IP address again this should not
need to be changed. Press ENTER.
Terminal will request to save changes, press ENTER. Terminal will
reboot and the new IP address will be set.
The terminal is now set up with the specified IP address and ready for
Integration.
Support
EVOPayments.co.uk/support-centre/
[email protected]
EVO Payments UK Ltd is authorised and regulated by the FCA under the Payment Services Regulation 2017 (FRN 959332) for
the provision of payments services and under the Consumer Credit Act (FRN 966552) for the undertaking of terminal
rentals. EVO Payments UK Ltd is registered in the UK under Companies House number 13527680. Registered address
Granite House, Granite Way, Syston, Leicester, LE7 1PL. EVO Payments UK Ltd trades under the following names:- EVO
Payments UK and EVO Payments International.