Insportline IN 6934 Bajamo User manual

1
USER MANUAL –EN
IN 6934 Treadmill inSPORTline Bajamo
IMPORTANT: Read all instructions carefully before using this product. Retain this Owner’s manual for
future reference.

2
CONTENTS
1. WARNING..................................................................................................................................................... 3
2. SAFETY TIPS................................................................................................................................................ 3
3. ASSEMBLY INSTRUCTION....................................................................................................................... 4
PARTS LIST....................................................................................................................................................... 4
ASSEMBLY INSTRUCTIONS FOR TREADMILL......................................................................................... 5
FOLDING........................................................................................................................................................... 7
4. THE MAINTENANCE AND THE ADJUSTMENT OF THE MACHINE .................................................. 8
5. TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMSChyba! Záložka není
definována.

3
1. WARNING
Exercise programs of any kind present an inherent danger to the participant.
Serious or fatal injury can occur.
Consult your doctor before beginning any exercise program.
All equipment and accessories are intended to be used by adults only in the manner shown / illustrated /
described. Anyone under the age of 18 should have adult supervision.
Always keep children and pets away from equipment
Always follow instructions (if provided).
Use proper techniques and common sense when exercising.
Always check your equipment thoroughly for worn or damaged parts before using. If any defects are
found, do not use this product.
Maximum user weight: 240lbs / 110kg
2. SAFETY TIPS
Before beginning any new exercise program it is advisable to consult your doctor to determine if you
have any physical or health conditions that could create a risk to your health and safety.
Be aware of your body’s signals. Incorrect or excessive exercise can be dangerous to your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, extreme shortness of breath, feeling light headed, dizzy or nauseous. If you experience any
of these conditions you should consult your doctor immediately.
Always wear suitable clothing while exercising.
Keep children and pets away from exercise equipment.
Do not put your hand near any of the movable parts to protect the hand and fingers from injury.
Keep the children away from the machine during your workout.
If using the treadmill for running exercise, please make sure that you hold the handle bar to avoid
falling down.
If you feel dizziness, nausea, chest pain, or any other abnormal feeling, stop the workout immediately.

4
3. ASSEMBLY INSTRUCTION
The parts of this machine are as follows, open the packing box, and take out the following parts.
PARTS LIST
NO.
Description
Spec.
QTY
NO.
Description
Spec.
QTY
1
Main frame
1
12
Handgrip cover
2
2
Base
1
13
Twister
1
3
Vertical tube(L)
1
14
Connect post
1
4
Vertical tube(R)
1
15
Massage frame
1
5
Meter Post
1
16
Massager
1
6
Meter
1
17
Inner hex cylinder head bolt
M8 x 40
2
7
Hexagonal Bolt
M10 x 20
4
18
Inner hex cylinder head bolt
M8 x 57
3
8
Flat Washer
φ10
4
19
Loose-proofed nut
M8
5
9
Hexagonal Bolt
M12 x 65
2
20
Spring pin
φ8 x 60
1
10
Flat Washer
φ12
2
21
Adjustable post
1
11
Cross Pan Head Screw
M6 x 12
4

5
ASSEMBLY INSTRUCTIONS FOR TREADMILL
A flat area of 4’ x 3’ will be required to properly assemble the treadmill.
Adjustable Wrench and M8 and M10 Allen Wrench will be required to complete the assembly.
Step 1:
1. Open the packing box, take out the above parts, and then put them on the
flat floor.
2. Please connect the vertical tube (3) (4) to the base (2) with hexagonal
bolt M10 x20 (7) and flat washer (4).
Step 2:
Fix the mainframe (1) to the vertical tube with hexagonal
bolt M12 x65 (9) and flat washer (10).
Step 3:
Connect the sensor wire first and then tighten the meter
post (5) to the vertical tube with cross pan head screw M6
x12 (11). At last fix the meter (6) to the meter post (5).
Step 4:

6
Press the handgrip cover (12) to the vertical tube.
Step 5:
4
3
2
7
8
7
8
15
19
17
17
19
18
19
14
Please fix the connecting tube (14) to the vertical tube with inner hex
cylinder head bolt M8 x 40 (17) and loose-proofed nut (19) and then
fasten the massage frame (15) to the base (2) with hexagonal bolt M10
x20 (7) and flat washer (8). At last connect the massage frame (15) to
the connecting tube (14) with inner hex cylinder head bolt M8 x57 (18)
and loose-proofed nut (19).
Step 6:
14
16
15
10
Please dismount the massage bolt first and then connect the
massager (16) to the massage frame (15).

7
Step 7:
18
20
19 13
Connect the twister (13) to the base (2) with inner hex cylinder head bolt M8 x57
(18), loose-proofed nut (19) and spring pin (20).
Step 8:
21
1
17
19
2
Dismount the bolt from the adjustable post (21) first and
then fix it to the mainframe (1) with inner hex cylinder
head bolt M8 x40(17) and loose-proofed nut (19).
Please refer to the illustration to ensure that all parts are oriented correctly. HANDS TIGHTEN ALL BOLTS
INITIALLY UNTIL THE UNIT IS COMPLETELY ASSEMBLED. After assembly is fully complete, go back
and tighten all bolts.
FOLDING
Pull out the spring pin when you want to fold this machine, and insert
the pin while reaching the place.
NOTE: This machine is foldable.

8
4. THE MAINTENANCE AND THE ADJUSTMENT OF THE
MACHINE
Adjustment of the Machine:
Before delivery of the product, the worker and the QC have adjusted the running belt to the best condition. If
running belt deviate, you can adjust it through the Belt Adjustment Bolt. You can adjust the running belt left or
right toward the center position by adjust the Belt Adjustment Bolt clockwise or anticlockwise.
Maintenance of the running belt:
After using this machine for some time, you may feel the resistance increase, so it is necessary to clear and
lubricate the machine. Follow below: open one side of the tube, clear the board, and add wax evenly on the face
of the board.