iPECS LDP-7000 Series User manual

LDP-7000 Series
User Guide
Please read this manual carefully before
operating Phone. Retain it for future reference

Important Safety Information

Important Safety Information

Important Safety Information

LDP-7000 Series Model
LDP
-
7008D
LDP
-
7008D
LDP-7004D
LDP-7004N
1

Input/Output Devices and Button
LDP
-
7008D
LDP
-
7008D
1
2
3
LCD Display
Handset
Headphone Socket (Ear/Mic Mode)
3
4
5
6
7
8
Headphone
Socket
(Ear/Mic
Mode)
Speaker
Speaker Button
Hold/Save Button
Volume Button
Loop Button
8
9
10
11
12
13
Loop
Button
Message Waiting LED
Dnd/Fwd Button
Call Back Button
Flexible Button
Speed Button
13
14
15
Speed
Button
Trans/Pgm Button
Handsfree Microphone
2

Input/Output Devices and Button
LDP
-
7004D
LDP
-
7004D
1
2
3
LCD Display (LDP-7004D only)
Handset
Speaker
3
4
5
6
7
8
Speaker
OHD Button
Hold/Save Button
Message Waiting LED
Trans/Pgm Button
Speed Button
8
9
10
Speed
Button
Flexible Button(Loop Button)
Volume Button
3

Item
Description
Input/Output Devices and Button
Used for handset call.
The optional earphone into the
handset
to
provide
a
hands
Handset
Earphone-Jack
Item
Description
handset
to
provide
a
hands
-
free phone conversation.
Outputs tones and voice.
Used to access speed dialing
Speaker
Speed Button
Used
to
access
speed
dialing
,
speed programming, saved
number redial.
The DND (Do Not Disturb)
feature blocks all incoming
Speed
Button
Dnd/Fwd
Button
feature
blocks
all
incoming
calls. When DND is active, the
red LED in this button is
illuminated.
It is also used to activate call
Button
forward, e.g. to another station
or voicemail. When call
forward is activated, the red
LED flashes.
This button put a call on hold
or save information when
programming.
Speaker toggles the
Hold/Save
Button
Speaker Button speakerphone state, and the
red LED is illuminated when
the speakerphone is active.
On Hook Dial allows 7004N&DOHD Button users to dial and monitor call
state without lifting the
handset.
4

Item
Description
Input/Output Devices and Button
Shows dialed and incoming
numbers (where applicable)
and on the 7008D it will
LCD Display
Item
Description
displa
y
other information about
call status, dialing directories
and message information.
This button is used to initiate a
ll t f (TRS) t t
Trans/PGM
Btt
ca
ll
t
rans
f
er
(TRS)
or
t
o en
t
er
programming mode (PGM).
The last two (7004D/7004N) or
six (7008D) flex buttons can
b i d t id li
B
u
tt
on
Flexible
Button
b
e ass
ig
ne
d
ou
t
s
id
e
li
ne
presentation or as one-touch
feature access. (See codes at
rear of guide)
A t ti i iti t ll
Cllb k
A
s
t
a
ti
on can
i
n
iti
a
t
e a ca
ll
back request to a busy station.
Once that station becomes idle,
the initiating station is signaled.
Th
l
btt
dj t
th
C
a
ll
b
ac
k
Button
Volume Button
Th
evo
l
ume
b
u
tt
on a
dj
us
t
s
th
e
audio levels for ringing,
handset and speakerphone or
OHD functions .
Mi h f h d
f
Volume
Button
Hand
free
Mi
crop
h
one
f
or
h
an
d
s-
f
ree
speakerphone function.
Loop Button(s) are required for
presentation of outside lines to
the telephone At least one is
Hand
-
free
Microphone
Loop Button
the
telephone
.
At
least
one
is
required per telephone.
5

Cable Connection
BC
A
A
Cable connection
AConnect the telephone cord (curly cord)
to the handset and the othe
r
end to the
handset jack at the bottom of the telephone.
BConnect the line cable to the port at the
bottom of telephone and the other end to
the wall socket.
CConnect the Headphone to the headphone
jack on the left side of the telephone.
(As viewed from the front.)
※Note: 7004N and 7004D does not
support integral headphone mode.
6

Placing an Outside Call
Basic Function
Placing
an
Outside
Call
●Lift handset, press OHD/Speaker or dial from live keypad.
●Dial 9.
●Dial the desired number.
Placing an Intercom Call
●Lift handset, press OHD/Speaker or dial from active keypad.
Placing an Outside Call on Hold
●Dial the station number.
Whil d l ll [HOLD] b
Retrieving a Outside Call on Hold
●
Whil
e connecte
d
to an externa
l
ca
ll
, press
[HOLD]
b
utton.
R
di i I i C ll
●Press the flashing flexible button.
※Note: calls will automatically recall after pre-defined time
R
e-
di
rect
i
n
g
an
I
ncom
i
n
g
C
a
ll
(Call Pick-up)
When you hear another phone ringing in your area,
●Lift handset, press OHD/Speaker or dial from live keypad.
●Dial 7.
Di l th t i b f th i i t ti
Answering an Waiting Call
●
Di
a
l
th
e ex
t
ens
i
on num
b
er o
f
th
e r
i
ng
i
ng s
t
a
ti
on.
●You will be connected automatically to the caller.
●Press the flashing CO button.
7

Basic Function
Call Wait (Camp
-
on)
Call
Wait
(Camp
on)
●After receiving station busy tone, dial＊.
●Camp-on tone is heard in the called station.
●When called party answers, talk or hang up to
transfer another call to the called party.
Last Number Redial
●Lift handset, press OHD/Speaker or dial from active keypad.
●Dial 5 5 2 or press speed button + dial ‘＊’ + Hold/Save button.
Storing Station Speed Dial Numbers
●Press the [TRANS/PGM] and [SPEED] Button.
●Dial speed bin number. Range (XXX-ZZZ)
●Dial speed dial number you wish to store.
(iPECS
-
MG : Dial number with CO Access code)
Using Station Speed Dial Numbers
(iPECS
MG
:
Dial
number
with
CO
Access
code)
●Press the [HOLD/SAVE] button.
●Enter the name associated to the number.
●Press the [HOLD/SAVE] button.
●You will hear confirmation tone.
●Press the [SPEED] button
●Dial the desired speed dial bin number.
Group Call Pick
up
Group
Call
Pick
-
up
When hearing an unattended phone ringing in your area,
●Lift handset.
●Dial 5 5 6.
●You will be connected automatically to the caller.
※Note: you must be in the same pick-up group.
8

Code for Flexible Button Programming
Register of Flexible Button
Register
of
Flexible
Button
Trans/Pgm
1
Press the [Trans/Pgm] button.
2
Press the [Flexible] button.
3
Dial 1 for Number,
Dial 2 for Fixed Button
4
Enter code number .
Or, Select desirable Fixed Button
Hold/Save
5
Press the [Hold/Save] button.
9

Code for Flexible Button Programming
Button Assignment for LDP
-
4N/4D 8D
Button
Assignment
for
LDP
4N/4D
,
8D
Co
de
FUNCTION co
de
FUNCTION
11
A d (H/T/P)
52
Mbil
EtN b
11
A
nswer mo
d
e
(H/T/P)
52
M
o
bil
e-
E
x
t
.
N
um
b
er
PGM
12 Station Name Program 53 Mobile-Ext. CLI PGM
13 Set Wake Up 54 Create Conference
Room
14 Reset Wake Up 55 Delete Conference
Room
15 Language Program 61 Speaker/Headset
PGM
16 LCD Date Mode
Change
62 Headset Ring
Program
Change
Program
17 LCD Time Mode
Change 71 Register Station ICLID
18 Set Back Light 72 View Station ICLID
21 ICM Ring Type 81 View IP Address
Program
22 CO Ring Type
Program 82 View Mac Address
23 Set BGM 83 View Keyset Version
31 Tem
p
orar
y
COS Mode 91 MPB Version Dis
p
la
y
py
py
32 Retrieve COS 92 View IP Address
33 Walking COS
34 Register Password
35 Call Lo
g
Protect
g
36 SMS Message Protect
41 Preselected MSG
PGM
42 Set User Message
10
51 Mobile-Ext. Enable

Important Safety Information

Important Safety Information

Important Safety Information

LDP
7000 Series Model 7016D & 7024D
Getting Started
LDP
-
7000
Series
,
Model
7016D
&
7024D
LDP-7016D/7024D are advanced, user-friendly digital keysets, offering the convenience
of 3 soft buttons and a navigation key.
• Features
-.Trendy and Stylish LDP Family design
()
-.Multi Level 3 Line LCD
(
3 x 24
)
-.16 or 24 Flexible buttons with dual-color LED’s
-.Additional Device Port (ADP) for SLT or FAX
-.Call Log Feature
-.Call Recording Feature –7024D only (Optional USB Module).
-.Hands-Free Solution –7024D only (Optional Blue- Tooth Module).
-.Wall Mountable (Bracket O
p
tional)
LDP
-
7016D
LDP
-
7016D
LDP-7024D
1

Input / Output Devices and Buttons
Getting Started
Input
/
Output
Devices
and
Buttons
Handset Visual Ringing LED
110
Earphone-Jack Socket
(Ear/Mic Mode)
Speaker
Speed Button
Trans/Pgm Button
Flexible Button (Loop Button)
Call back Button
2
3
4
11
12
13
Dnd/Fwd Button
Speaker Button
Hold/Save Button
V
olume Button
Hands-free Microphone
Menu Button
5
6
7
14
15
16
3 Soft Button
LCD Display
Phonebook Button
(Same operate as ‘Speed’)
8
9
17
2

Getting Started
Used for handset call.
Used to connect optional headset to the phone.
Outputs tones and voice.
Used to access speed dialing, speed programming, save number redial,
and last number redial.
Handset
Earphone-Jack Socket
Speaker
Speed Button
1
2
3
4
The DND (Do Not Disturb) feature blocks all incoming calls. When DND
is active, the red LED in this button is illuminated.
It is also used to activate call forward, e.g. to another station or
voicemail. When call forward is activated, the red LED flashes.
Speaker toggles the speakerphone state, and the red LED is
illuminated when the speakerphone is active.
DND/Fwd Button
Speaker Button
5
6
This button is used to put a call on hold or save information when
programming.
Used in conjunction with fixed and flexible features, and the function
changes in relation to call progress, as indicated on the LCD display.
Displays information about telephone status, dialing directories,and test
message information.
Hold/Save Button
3 Soft Buttons
LCD Display
7
8
9
Illuminates when the phone is ringing.
This button is used to initiate a call transfer (TRS) or to enter
programming mode (PGM)
Some flexible buttons are pre-programmed in the system for line
appearances, loop functions etc. The remaining flexible buttons can be
Visual Ringing LED
Trans/PGM Button
Flexible Button
10
11
12
appearances,
loop
functions
etc.
The
remaining
flexible
buttons
can
be
user-programmed.
A station can initiate a call back request to a busy station. Once that
station becomes idle, the initiating station is signaled.
The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.
Microphone
is
used
for
hands
free
speakerphone
function
Call back Button
Volume Button
Hands
-
free Microphone
13
14
15
Microphone
is
used
for
hands
-
free
speakerphone
function
.
The menu button is used to move to the desired option(Dial, MSG,
Program), and to select the next screen when indicated by an arrow on
the LCD display.
Used to access speed dialing, save number redial, and last number
redial, and to access flexible button programming.
Hands
-
free
Microphone
Menu Button
Phonebook Button
15
16
17
3