Iron Age Office CARRUCA User manual

CARRUCA 4 PERSON
L-SHAPE SIT STAND
WORKSTATION
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides for markings.
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
[e-mail]

HARDWARE
Screws are shown actual size. You may receive extra hardware with your unit.
14-10 LAG BOLT
QTY: 60
SCREEN BOLT
QTY: 20
SCREEN NUT
QTY: 20
LEVELING FOOT
QTY: 18 9/16 Crescent Wrench
15/16 Crescent Wrench
3/8 Hex Drive
#3 Square Drive
Tools Required
1
2
3
4

PARTS
RIGHT TABBED LEG
LEFT TABBED LEG MAIN TOP
SECOND TOP
UNDERMOUNT
DIVIDER SCREEN
MODESTY SCREEN
1
2
3
M1
M2
DS
TROUGH
R1
R2
RETURN TOP
SECOND RETURN TOP
M3 THIRD TOP
M4 FOURTH TOP
R3
R4
THIRD RETURN TOP
FOURTH RETURN TOP
LEFT TABBED LEG
LEFT TABBED LEG
LEFT TABBED LEG
RIGHT TABBED LEG
RIGHT TABBED LEG
4
5
6
7
8RIGHT TABBED LEG
SS
MS
T
M1
M2
1
2
3
4
T
MS1
MS2
SS2
R2
M4
8
7
DS1
R1
SS1
M3
6
5
16
SS3
MS3
R3
DS2
R4
MS4
SS4
SIT STAND BASE
*Instructions and hardware included
in sit stand packaging.
FLOOR MOUNT
DIVIDER SCREEN
DS2

ASSEMBLY
STEP 1
Place wood tops face down on a clean surface.
Screw in (5) 14-10
Lag bolts in each leg
using a #3 square drive.
1
Screw in leveling foot into
each leg with 9/16 crescent wrench.
4
M2
M1
R1
M3
R3
R4
M4
R2
STEP 2
Assemble sit stand base according
to package instructions.
Align legs using markings on
the underside of the wood tops.
Tabbed legs should be placed so that
tabs are facing each other.
SS3
SS4
5
6
7
8
SS2
3
4
2
1
SS1
STEP 3
Screw in (2) leveling feet in each leg
and divider screen.

ASSEMBLY
Insert screen bolts into
the front of the screen
through the tabbed legs
using a 3/8 hex drive.
Fasten screen nut to screen bolt
on backside of screen using a
15/16 crescent wrench.
2
3
STEP 4
Attach screens to front tabbed legs
with (4) screen bolts and (4) screen nuts
in each screen.
MS4
MS3
MS1
MS2
STEP 5
Flip M2 and M4 desks to upright
position.
M4
M2
STEP 6
Align undermount divider screen to M2
M4 desks. Secure divider screen to underside of
M2 desk with (3) lag bolts and M4 desk with (2) lag bolts.
Screw in (3) lag bolts into
divider screen with a #3 square drive.
Screw in (2) lag bolts into
divider screen with a #3 square drive.
4
4
M2 M4
M4
M2
DS

ASSEMBLY
STEP 8
Align floor mount divider screen to M4 desk.
1
Secure divider screen to underside
of M4 desk with (3) lag bolts on
each side with a #3 square drive.
STEP 7
Flip M1 desk to an upright position.
Align to M2 desk. Secure M1 desk to
M2 desk with (3) lag bolts into
divider screen on the underside of
the M1 desk with a #3 square drive.
M1
DS
M2
DS2
M4
STEP 9
Flip M3 desk to an upright position.
Align to M4 desk. Secure M3 desk to
M4 desk with (3) lag bolts into
the floor mount divider screen and
(2) lag bolts into undermount divider
screen on the underside of
the M3 desk with a #3 square drive.
DS2
M4
DS
M3

ASSEMBLY
STEP 10
Align troughs to tabs on divider screens.
Secure with (2) screen bolts and nuts in each trough.
DS DS2
T
Fasten screen nut to screen bolt
on the backside using a
15/16 crescent wrench.
Insert screen bolt into
front of the trough
using a 3/8 hex drive.
2
3
STEP 11
Flip and align sit stand returns to
main desks and divider screen.
SS2
SS4
SS1
SS3
STEP 12
Enjoy your desk!
CARE INSTRUCTIONS
To care for either wooden or metal surfaces of
Iron Age Office products,
gently wipe with a soft cloth dampened with water and
a mild dishwashing liquid.
Once satisfied, dry with a soft cloth.