Iron Age Office IA V1 User manual

IA SINGLE SIT-STAND
WITH MODESTY
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. The furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides
for markings. Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
[e-mail]

HARDWARE
Screws are shown actual size. You may receive extra hardware with your unit.
14-10 LAG BOLTS
QTY: 5 9/16 Crescent Wrench
Tools Required
1
PARTS
SS SIT STAND BASE
*Instructions and hardware included
in sit stand packaging.
MAIN TOP
M1
MS MODESTY SCREEN
M1
SS
MS

ASSEMBLY
STEP 1
Place wood top face down on a clean surface.
STEP 2
Assemble sit stand base according
to package instructions.
Align legs to wood top
using markings on the underside
of main top.
STEP 3
Flip desk to an upright position.
Align modesty screen to underside of top
using markings on the underside of top.
Secure screen to desk with (5) lag bolts.
M1
M1
SS
STEP 4
Enjoy your desk!
CARE INSTRUCTIONS
To care for either wooden or metal surfaces of
Iron Age Office products,
gently wipe with a soft cloth dampened with water and a
mild dishwashing liquid.
Once satisfied, dry with a soft cloth.
M1
MS
Screw in (5) 14-10
lag bolts into screen on the
underside of the top
using a #3 square drive.
1
MS