Iron Age Office LUXE SINGLE User manual

LUXE SINGLE
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides for markings.
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
[e-mail]

HARDWARE
Screws are shown actual size. You may receive extra hardware with your unit.
14-10 LAG BOLT
QTY: 16
Tools Required
#3 Square Drive
LEVELING FOOT
QTY: 4
9/16 Crescent Wrench
1
4
PARTS
STANDARD LEG
MAIN TOP
*
M1
*
*
M1

A
B
ASSEMBLY
STEP 1
Place wood top face down on a clean surface.
STEP 2
Align legs using markings on
the underside of main top.
Screw in all legs with
(4) 14-10 lag bolts per leg,
using a #3 square drive.
Screw in (4) 14-10
lag bolts in each leg.
STEP 3
Screw in (1) leveling foot per leg.
Screw leveling foot into
each leg with 9/16 crescent wrench.
1
4
M1

ASSEMBLY
STEP 4
Flip desk and enjoy!
CARE INSTRUCTIONS
To care for either wooden or metal surfaces of Iron Age Office products,
gently wipe with a soft cloth dampened with water and a mild dishwashing liquid.
Once satisfied, dry with a soft cloth.