Iron Age Office KNIGHT SINGLE DESK User manual

KNIGHT SINGLE
DESK
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. The furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottomsides
for markings. Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
[e-mail]

HARDWARE
Screws are shown actual size. You may receive extra hardware with your unit.
14-10 LAG BOLTS
QTY: 9 #3 Square Drive
Tools Required
1
SS SIT STAND BASE
*Instructions and hardware included
in sit stand packaging.
MAIN TOP
M1 MS MODESTY SCREEN
R1 RETURN TOP A
B
SPLICE PLATE
SPLICE PLATE
KNIGHT SHELL
KS
KS2 KNIGHT SHELL
1/4-20 BOLT
QTY: 2
1/4-20 NUT
QTY: 2
3/8-16 x 2 BOLT
QTY: 4
5/32 Hex Drive
7/16 Crescent Wrench
7/32 Hex Drive
8
9
10

PARTS
M1 MAIN TOP
SS SIT STAND BASE
*Instructions and hardware included
in LINAK packaging.
MS MODESTY SCREEN
SMS SIDE MODESTY SCREEN
MKS MAIN KNIGHT SHELL
SKS SIDE KNIGHT SHELL
SKS
SMS
SS
MKS MS
SKS
SMS
M1

U
ASSEMBLY
STEP 1
Place wood top face down on a clean surface.
STEP 2
Assemble sit stand base according
to package instructions.
Align legs to wood top
using markings on the underside
of main top.
Screw in (2) 14-10
lag bolts into screen on the
underside of the top
using a #3 square drive.
STEP 3
Align side modesty screen to main top
using markings on the underside of top.
Secure screen to desk with (2) lag bolts.
1
M1
SS
SMS
M1

V
ASSEMBLY
STEP 4
Align main modesty screen to main top
using markings on the underside of top.
Secure screen to desk with (5) lag bolts
using a #3 square drive. Secure main screen
to side screen with 1/4-20 bolt and nut.
Secure main screen to side screen
with (1) 1/4-20 bolt using
a 5/32 Hex Drive. Secure bolt
with (1) 1/4-20 nut using
a 7/16 Crescent Wrench.
8
9
SMS
MS
STEP 5
Align side modesty screen to main modesty screen
and top using markings on the underside of top.
Secure screen to main top with (2) lag bolts.
Secure side screen to main screen with 1/4-20 bolt
and nut like step 5.
STEP 6
Flip desk to an upright position.
MS
SMS

W
ASSEMBLY
STEP 7
Align main and side knight shells
to desk. Secure together with (2)
3/8-16x2 bolts.
10
Secure main shell to side shell
with (2) 3/8-16x2 bolts using
a 7/32 Hex Drive.
STEP 8
Align side shell to main shell and secure
with 3/8-16x2 bolts like step 8.
STEP 9
Enjoy your desk!
SKS
MKS
SKS MKS
CARE INSTRUCTIONS
To care for either wooden or metal surfaces of
Iron Age Office products,
gently wipe with a soft cloth dampened with water and a
mild dishwashing liquid.
Once satisfied, dry with a soft cloth.