Iron Age Office FORTIS L-SHAPE User manual

FORTIS L-SHAPE
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides for markings.
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
[e-mail]

HARDWARE
Screws are shown actual size. You may receive extra hardware with your unit.
14-10 LAG BOLT
QTY: 30
Tools Required
#3 Square Drive
3/8 Hex Drive
15/16 Crescent Wrench
9/16 Crescent Wrench
SCREEN BOLT
QTY: 4
SCREEN NUT
QTY: 4
LEVELING FOOT
QTY: 6
1
2
3
4

PARTS
M1
R1
*
*
*
1
2
MS1
A
LEFT TABBED LEG
RIGHT TABBED LEG
MAIN TOP
STANDARD LEG MAIN SCREEN
RETURN
TOP
1
2
*
M1
R1
MS1
SPLICE PLATE
A

ASSEMBLY
STEP 1
Place wood tops face down on a clean surface.
R1
M1
STEP 2
Align legs using markings on
the underside of the wood tops.
Tabbed legs should be placed so that
tabs are facing each other.
Screw in all legs with
(4) 14-10 lag bolts in each leg.
*
R1
M1
*
1
2
*
Screw in (4) 14-10
Lag bolts in each leg
using a #3 square drive. 1
STEP 3
Attach screen to front tabbed legs
with (4) screen bolts and (4) screen nuts.
2
1
MS1
Insert screen bolts into
the front of the screen
through the tabbed legs
using a 3/8 hex drive.
2
Fasten screen nut
to screen bolt
on backside of
screen using a
15/16 crescent wrench.
3

ASSEMBLY
STEP 4
Align splice plate to main top using markings.
A
1
Attach splice plate with
(3) 14-10 lag bolts using
a #3 square drive.
STEP 5
Screw in (1) leveling foot in each leg.
4
Screw in leveling foot into
each leg with 9/16 crescent wrench.
A
M1
STEP 6
Flip main desk to upright position. Flip return
align to main desk. Secure with (3) lag bolts
into the shared plice plate on the underside of the return.
R1
M1
Secure return to main desk with
(3) lag bolts into shared splice plate
using a #3 square drive.
1
A

ASSEMBLY
STEP 6
Flip desk and enjoy!
CARE INSTRUCTIONS
To care for either wooden or metal surfaces of Iron Age Office products,
gently wipe with a soft cloth dampened with water and a mild dishwashing liquid.
Once satisfied, dry with a soft cloth.