Iron Age Office FORTIS 4 PERSON L-SHAPE WORKSTATION User manual

FORTIS 4 PERSON
WORKSTATION
Assembly Instructions
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
any wooden tops over and inspect the bottom sides for markings.
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
Henry Dover
678-725-1473 (c)
[e-mail]

HARDWARE
Screws are shown actual size. You may receive extra hardware with your unit.
14-10 LAG BOLT
QTY: 68
SCREEN BOLT
QTY: 20
SCREEN NUT
QTY: 20
LEVELING FOOT
QTY: 9 9/16 Crescent Wrench
15/16 Crescent Wrench
3/8 Hex Drive
#3 Square Drive
Tools Required
1
2
3
4
#2 Phillips Drive
TROUGH SCREW
QTY: 12
10

PARTS
CENTRAL SHARED LEG
FRONT LEFT TABBED LEG
FRONT SHARED LEG
FRONT RIGHT TABBED LEG MAIN TOP
SECOND TOP
FOURTH TOP
BACK LEFT TABBED LEG
THIRD TOP
1
2
3
4
5
M1
M2
M3
M4
BACK SHARED LEG
6TTROUGH
SB SUPPORT BAR
1
ES1
2
ES2
3
M2
DS
SB
*
4
*
T
M1
T
5
ES3
6
ES4
7
M4
SB
M3
DS2
BACK RIGHT TABBED LEG
STANDARD LEG
DIVIDER SCREEN
MODESTY PANEL
7
*
DS
ES

ASSEMBLY
STEP 1
Place wood tops face down on a clean surface.
STEP 2
Align legs using markings on
the underside of the wood tops.
Tabbed legs should be placed so that
tabs are facing each other.
Screw in (4) 14-10 Lag bolts
in legs 1,3,5 and 7.
1
M3
M4
M2
M1
M4
M3
M1
M2
3
7
6
5
1
*
2
4
*
Screw in (2) 14-10 Lag bolts
in legs 2,6 and *.
Screw in (1) 14-10 Lag bolt
in leg 4.
STEP 3
Secure legs to appropriate tops
using 14-10 lag bolts with a #3 square drive.

ASSEMBLY
STEP 4
Screw in (1) leveling foot in each leg.
Screw in leveling foot into
each leg with 9/16 crescent wrench.
4
STEP 6
Flip M2 desk to an upright position.
Secure but do not tighten
bottom support bar with
(2) screen bolts and (2) screen nuts.
1
5
*
4
2
6
7
3
*
STEP 5
Attach screens to front tabbed legs
with (4) screen bolts and (4) screen nuts.
3
2
ES2
SB
2
4
M2

ASSEMBLY
STEP 8
Flip M1 desk to upright position.
Align M1 top to M2 desk. Secure
desks together with lag bolts into
the legs and divider screen on
the underside of M1 top.
Screw in lag bolts into
divider screen and shared legs
with a #3 square drive.
1
DS1
STEP 7
Align divider screen to M2 top.
Secure divider screen to underside of M2 top
with (4) lag bolts on each side.
DS1
M2
M1
M2
secure divider screen
with (4) 14-10 lag bolts
on each side with
a #3 square drive
1

ASSEMBLY
STEP 9
Attach screen to front tabbed
legs of M1 desk with (4) screen
bolts and (4) screen nuts.
M1
ES1
1
2
STEP 10
Attach screen to back tabbed
legs of M4 desk with (4) screen
bolts and (4) screen nuts.
M4
7
6
ES4
STEP 11
Flip M4 desk to upright position.
Align M4 top to M2 desk. Secure
desks together with lag bolts into
the shared legs on the underside
of M4 top.
M4
M2

ASSEMBLY
STEP 12
Flip M4 desk to an upright position.
Secure but do not tighten
bottom support bar with
(2) screen bolts and (2) screen nuts.
M4
SB
STEP 13
Align divider screen to M4 top.
Secure divider screen to underside of M4 top
with (4) lag bolts on each side.
DS2
M4
STEP 14
Flip M3 desk to upright position.
Align M3 top to M4 and M1
desks. Secure desks together
with lag bolts into the legs and
divider screen on the underside
of M3 top.
M1 M3
M4

ASSEMBLY
STEP 15
Attach screen to back tabbed
legs of M3 desk with (4) screen
bolts and (4) screen nuts.
ES3
M3
5
6
STEP 16
Tighten both bottom support bars.
SB
STEP 17
Align troughs to underside of
joined desks using markings.
T
10
T
Screw in (6) trough screws into each
trough using a #2 phillips drive.

ASSEMBLY
STEP 18
Enjoy your desk!
CARE INSTRUCTIONS
To care for either wooden or metal surfaces of Iron Age Office products,
gently wipe with a soft cloth dampened with water and a mild dishwashing liquid.
Once satisfied, dry with a soft cloth.